• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.237-243
• /
• 1996

Current low head and small scale hydroturbines have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develop a new concept hydroturbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the economic respect could be attained. A small scale catapillar track- hydroturbine was fabricated and the performance test was carried out in a water tunnel over the head range of H = 0.8 m ~ 1.26 m. The peak turbine efficiency was 41.3% at the speed ratio of 0.6, and the turbine loss was mostly due to the friction at the chain drive used for power transmission from the runner to the shafts. This type of turbine is expected to become competitive when some improvement in the power transmission mechanism is made.

• 공업화학
• /
• 제7권1호
• /
• pp.18-25
• /
• 1996

교반소요동력은 장치의 설계상 중요할 뿐만 아니라 교반 프로세스를 평가, 검토하는 데 매우 중요하다. 특히 실험실 레벨에서 플랜트로의 스케일업은 주로 동력기준으로 행해지기 때문에 장치형상의 선택과 동력의 설정이 교반효과를 결정한다. 따라서 본 연구에서는 난류역 완전방해판 조건하에서 경사 임펠러 및 2단 패들 임펠러의 적절한 동력상관식을 제시한다. $$Np_{(pitch)}=({\theta}/90^{\circ})Np_{(90^{\circ})}$$ 또한 임펠러 사이의 거리에 따른 동력수의 추산식을 제시한다. $$Np=7.09(n_p)^{0.7}(\frac{b_(double)}{d})(\frac{H}{D})^{0.18}$$, $${n_p}^{0.7}(\frac{b_{(double)}}d)$$<2 $$Np=8.73\{(n_p)^{0.7}(\frac{b_{(double)}}{d})\}^{0.7}(\frac{H}{D})^{0.18}$$, $${n_p}^{0.7}(\frac{b_{(double)}}d)$$>2.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.513-516
• /
• 2008

We have replicated nanopillar arrays using injection molding process of active heating and cooling method by several peltier devices. The injection melding has a high accuracy ed good reproducibility that are essential for mass production at low cost. Conventional molding processes widely use the water-based mold heating and air cooling methods. However, in case of replication for nano-patterned structures, it caused several defects such as air-flow mark, non-fill, sticking and tearing. In this study, periodic nano-scale patterns are replicated by using injection molding with Peltier devices. Porous nano-scale patterns, which have pore diameter range from 120nm to 150nm, were fabricated by using anodizing process. Periodic nano-pore structures ( $20mm\;{\times}\;20mm$) were used as a mold stamp of injection molding. Finally, PMMA with nanopillar arrays was obtained by injection molding process. By using the Peltier devices, the temperature of locally adiabatic molds can be dramatically controlled and the quality of the molded patterns can be slightly improved.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.343-352
• /
• 2014

Uncertainty and sensitivity analyses with respect to nuclear data are performed with depletion calculations for BWR and PWR fuel assemblies specified in the framework of the UAM-LWR Benchmark Phase II. For this, the GRS sampling based tool XSUSA is employed together with the TRITON depletion sequences from the SCALE 6.1 code system. Uncertainties for multiplication factors and nuclide inventories are determined, as well as the main contributors to these result uncertainties by calculating importance indicators. The corresponding neutron transport calculations are performed with the deterministic discrete-ordinates code NEWT. In addition, the Monte Carlo code KENO in multi-group mode is used to demonstrate a method with which the number of neutron histories per calculation run can be substantially reduced as compared to that in a calculation for the nominal case without uncertainties, while uncertainties and sensitivities are obtained with almost the same accuracy.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제21권2호
• /
• pp.151-155
• /
• 2010

Protein disulfide isomerase (PDI) catalyzes the oxidation of disulfides and the isomerizatiob of incorrect disulfides in new polypeptides during folding in the oxidizing environment of the endoplasmic reticulum (ER). To increase recombinant protein hSCF (human stem cell factor) production, we have developed expression system using the Bombyx mori PDI (bPDI) as a fusion partner. bPDI gene fusion was found to improve the production of recombinant hSCFs. Thus, we conclude that bPDI gene fusion will be very useful for the large-scale production of biologically active recombinant proteins.

• KSBB Journal
• /
• 제9권2호
• /
• pp.115-121
• /
• 1994

240ml의 시료를 정제할 수 있는 30channel의 preparative-scale 자유유동전기이동 분리장치를 제작한 후 렌즈콩으로부터 lentil lectin(LcH)을 전기 집속법으로 분리하였다. 분리된 각 분획을 PAGIEF젤에서 silver staining했을 때 불순물이 전혀 검출되지 않을 정도의 고순도 lectin을 얻을 수 있었다. 이 때 ampholyte로서 HEPES(50mM) -Tris(50mM) -urea(3M) 등을 사용하였으며 50mM Histidine(pI 7.65)인 경우 가장 분리도가 가장 좋았다. LcH는 보통의 조건하에서 LcH-A와 LcH-B의 두가지 순수한 형태로만 나타났으며 따라서 이 장치를 사용하여 다단 분리 정제를 할경우 두 성분의 완전한 분리도 가능함을 보여 주었다.

• 한국환경과학회지
• /
• 제15권1호
• /
• pp.67-75
• /
• 2006

The degradation of Rhodamine B (RhB) in water was investigated in laboratory-scale experiments, using five advanced oxidation Processes (AOPs) $UV/H_2O_2$, lenten, photo-lenten, $UV/TiO_2,\;UV/TiO_2/H_2O_2$. The photodegradation experiments were carried out in a fluidized bed photoreactor equipped with an immersed 32 W UV-C lamp as light source. initial decolorization rate and COD removal efficiency were evaluated and compared. The results obtained showed that the initial decolorization rate constant was quite different for each oxidation process. The relative order of decolorization was: photo-fenton > $UV/TiO_2/H_2O_2$ > fenton > $UV/H_2O_2$ > $UV/TiO_2$ > UV > $H_2O_2$. The relative order of COD removal was different from decolorization: photo-fenten ${\fallingdotseq}$ $UV/TiO_2/H_2O_2\;>\;UV/TiO_2\;>\;fenton\;>\;UV/H_2O_2$. The Photo-lenten and $UV/TiO_2/H_2O_2$ processes seem to be appropriate for decolorization and COD removal of dye wastewater.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.433-434
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.837-838
• /
• 2011

• 한국자기학회지
• /
• 제6권4호
• /
• pp.204-210
• /
• 1996

제철소의 부산물인 mill scale과 $Fe_{2}O_{3}$, 그리고 이들의 혼합물을 사용하여 M형 ferrite를 제조하였다. $Fe_{2}O_{3}$와 $BaCO_{3}$의 몰비를 5.2~6.0으로 변화시킨 혼합물의 하소 및 소결은 각각 $1150^{\circ}C,\;1250^{\circ}C$에서 2시간 행하였으며, 하소시에 mill scale 중의 불순물 성분인 $SiO_{2},\;Al_{2}O_{3},\;MgO,\;CaO\;및\;Na_{2}O$를 적당량 첨가한 시편으로 자기적 특성과 형상을 조사하였다. $Na_{2}O$를 첨가한 시편은 미반응의 $Fe_{2}O_{3}$와 중간 화합물인 $BaFe_{2}O_{4}$의 영향으로 자기적 특성이 감소하였으나, $BaO.5.6Fe_{2}O_{3}$ 조성에 $SiO_{2}$와 $Al_{2}O_{3}$의 첨가는 특성의 증진을 보였으며, 특히 $Al_{2}O_{3}$는 $M_{s}$ 값은 감소시켰으나 $_{B}H_{c}$ 값을 증가시켰다. BM($BaCo_{3}$와 mill scale의 혼합물)과 BFM($BaCO_{3},\;Fe_{2}O_{3}$, mill scale의 혼합물) 소결 시편의 ${(BH)}_{max}$는 각각 0.86, 1.04 MGOe였으며, $440^{\circ}C$ 부근에서 자기 특성의 변화를 보였다.