• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.

• Journal of Life Science
• /
• v.34 no.10
• /
• pp.673-681
• /
• 2024

Periodontal disease is a significant oral health issue, with halitosis-inducing bacteria being one of its primary causes. Among these bacteria, the anaerobic pathogen Porphyromonas gingivalis is known to accelerate the progression of periodontitis. Effective control and prevention of these bacteria are therefore crucial for the management and prevention of periodontal diseases. The aim of this study was to explore methods for effectively controlling halitosis-causing bacteria to enhance oral hygiene and the prevention of halitosis. We focused on Dendropanax morbifera, a traditional Korean medicinal plant known for its antimicrobial, anti-inflammatory, and antioxidant properties. Specifically, we investigated the antimicrobial effects of D. morbifera leaf extracts and fermented sap against P. gingivalis. The minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) of the leaf extracts and fermented sap were determined under anaerobic conditions. The efficacies in reducing malodor were also evaluated using detection tubes to measure by measuring the concentrations of hydrogen sulfide (H₂S) and ammonia (NH₃) using detection tubes. Both the extracts and sap exhibited significant antimicrobial activity against P. gingivalis. Furthermore, both test materials effectively reduced bacterial production of H₂S and NH₃ gases. Field emission scanning electron microscopy observations revealed that bacterial cell wall damage began at the MIC levels, with complete cell wall destruction observed at the MBC levels. These results provide valuable data regarding the antimicrobial and halitosis-reducing effects of D. morbifera leaf extracts and fermented sap and support the potential use of D. morbifera in developing new oral hygiene products.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.70-76
• /
• 2003

Continuous anaerobic hydrogen production with a mixed culture was investigated. With a sucrose concentration of 5g COD/L in the feed, hydrogen production exceeded $0.5mole\;H_2/mole\;hexose$ was found at the early stage, however it did not maintain longer than 9days. It was assumed that the failure was caused by insufficient active hydrogen producing bacteria in the reactor. Therefore, effects of pH control, repeated heat treatment and substrate concentration on sustainable continuous anaerobic hydrogen production was examined to find out operating conditions to sustainable hydrogen production. Decrease of hydrogen production was not overcome by only pH control at 5.3. Repeated heat treatment could recover hydrogen producing activity without any external inoculum supply. However, frequent heat treatment was needed because the treated sludge also showed the tendency in decrease of hydrogen production. With a sucrose concentration of 30g COD/L in the feed, hydrogen production maintained $1.0-1.4mole\;H_2/mole\;hexose$ in continuously stirred tank reactor and $0.2-0.3mole\;H_2/mole\;hexose$ in anaerobic sequencing batch reactor) for 24days. More than 90% of soluble organics in effluent was organic acids, in which n-butyrate was the most one.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.55-62
• /
• 2024

This study aimed to compare the nutrient uptake rate, growth and yield of strawberry grown under the aquaponic and hydroponic systems in a plant factory. For aquaculture, 12 of fish (Cyprinus carpio cv. Koi) were raised in an aquaponics tank (W 0.7 m × L 1.5 m × H 0.45 m, 472.5 L) filled with 367.5L of water at a density of 5.44 kg·m^-3. The 30 seedlings of strawberry were planted in ports filled with perlite substrate and then were placed on the bed (W 0.7 m × L 1.5 m × H 0.22 m) at the top of the aquaponics system, and the 30 seedlings were planted in net-pots and then placed on the holes of acrylic plates (140 cm × 60 cm, Ø80 mm) on the bed (W 0.7 m × L 1.5 m × H 0.22 m) at the deep flow technique (DFT)- hydroponics. The pH and EC of the aquaponic solution was ranged from 4.3 to 6.9 and 0.32 to 1.14 dS·m^-1, respectively, while those of hydroponics were ranged from 5.1 to 7.5 and 1.0-1.8 dS·m^-1, respectively. The NO₃-N and NH₄-N concentration of the aquaponic solution were higher about 3.6 and 2.2 me·L^-1 than those of the standard hydroponic solution for strawberry cultivation. The P, Ca, Mg, and S ions in the aquaponic solution were also higher about 0.76, 3.1, 0.8, and 0.9 me·L^-1 than those of standard hydroponic solution, respectively, while the K and Fe were lower about 0.8 me·L^-1 and 0.5 mg·L^-1, respectively. The mineral contents of the strawberry leaves grown on aquaponics did not differ from that of hydroponics, and K content in the leaves were in an appropriate range. Uptake rates of T-N and P between the 58 and 98 days after transplant (DAT) were 1.5 and 1.9-fold higher in the aquaponics than those of hydroponics, respectively with no significant difference in the uptake rate of K. The crown diameter, plant height, and leaf length and width in the 98 DAT were significantly higher in aquaponics. The number of fruits per plant was significantly higher in aquaponics than those in hydroponics, and the fresh and dry weights of fruit and length and width of fruit were significantly higher in hydroponics. The results suggest that plants in aquaponics continuously utilize fertilizer components of solid particles from fish and feed wastes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.17-22
• /
• 2015

A total of CNU 28 hybrids were developed at the CNU Corn Breeding Lab. were evaluated to identify new cultivars in botanical characteristics, fresh yield per 10a and taste qualities. Most of these hybrids were stable in environmental stresses such as lodging, disease and insects. Stem height ranged from 115.0 to 239.3 cm, and ear height ranged from 30.7 to 107.0 cm. The ear height to stem height ratio was showed low than 50% of standard as a stable plant type to lodging. The range of ear length was 14.2 cm to 23.0 cm. Especially, CNU 13H-73 was very longest ear as a 23 cm. The fresh yield per 10a was high in purple of CNU13H-79 hybrid than control hybrid Miheuckchal, and CNU13H-73 in white hybrid was similar Yeonnong check hybrid. The 100-kernel weights in CNU13H-3 and CNU13H-9 hybrids were higher than that of the control hybrid. CNU13H-98 among hybrids had a 100-kernel weight of 20.32 g, which was heavier than that of the control hybrid Daehackchal Gold 1. The average pericarp thickness was $41.4{\mu}m$, CNU13H-46 among hybrids had a very thin pericarp as a $35.5{\mu}m$. The mean sugar content of the used hybrids was 14.95 brix%; CNU13H-73 and CNU13H-55 had higher than Mibak2 as a control hybrid.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.245-253
• /
• 2019

BACKGROUND: Weathering of bottom ash (BA) might induce change of its surface texture and pH and affect physical and chemical properties of soil associated with greenhouse gas emission, when it is applied to the arable soil. This study was conducted to determine effect of weathering of BA in mitigating emission of greenhouse gases from upland soil. METHODS AND RESULTS: In a field experiment, methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) emitted from the soil was periodically monitored using closed chamber. Three month-weathered BA and non-weathered BA were applied to an upland soil at the rates of 0, 200 Mg ha^-1. Maize (Zea mays L.) was grown from July 1_st to Oct 8_th in 2018. Both BAs did not affect cumulative CH₄ emission. Cumulative CO₂ emission were 23.1, 19.8, and 18.8 Mg/ha/100days and cumulative N₂O emission were 35.8, 20.9, and 17.7 kg/ha/100days for the control, non-weathered BA, and weathered BA, respectively. Weathering of BA did not decrease emission of greenhouse gases significantly, compared to the weathered BA in this study. In addition, both BAs did not decrease biomass yields of maize. CONCLUSION: BA might be a good soil amendment to mitigate emissions of CO₂ and N₂O from arable soil without adverse effect on crop productivity.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.235-240
• /
• 2006

We investigated the effect of ZnO filler on the microstructure of $BaO-B_2O_3-ZnO-P_2O_5$ glass system to find an etching mechanism of barrier ribs. The sintering behavior of composites heated in the temperature range $560-600^{\circ}C$ was studied by volumetric shrinkage rate and microstructure. The etching test was carried out in $HNO_3$ solution at $50^{\circ}C$ for 10 min. The volumetric shrinkage of sintered sample decreased with the increased firing temperature because of the formation of two crystals. Glass and ZnO filler react forming the $BaZn_2(PO_4)_2$ crystal phases during the sintering process. Etching phenomenon of sintered samples by $HNO_3$ showed that the $BaZn_2(PO_4)_2$ crystal phase was strongly leached compared to glass matrix, crystal phases and fillers. Therefore, the control of interface by condition of sintering is so important to achieve etching effect in barrier ribs.

• Advances in nano research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2023

Ti₃C₂T_x MXene, a 2D material, is known to exhibit unique characteristics that are strongly dependent on surface termination groups. Here, we developed a novel annealing approach with Ca as a reducing agent to simultaneously remove F and O groups from the surface of multilayered MXene powder. Unlike H₂ annealing that removes F effectively but has difficulty in removing O, annealing with Ca effectively removed both O and F. X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy revealed that the proposed approach effectively removed F and O from the MXene powder. The results of O/N analyses showed that the O concentration decreased by 57.5% (from 2.66 to 1.13 wt%). In addition, XPS fitting showed that the volume fraction of metal oxides (TiO₂ and Al₂O₃) decreased, while surface termination groups (-O and -OH) were enhanced, which could increase the hydrophilic and adsorption properties of the MXene. These findings suggest that when F and O are removed from the MXene powder, the interlayer spacing of its lattice structure increases. The proposed treatment also resulted in an increase in the specific surface area (from 5.17 to 10.98 m²/g), with an increase in oxidation resistance temperature in air from ~436 to ~667 ℃. The benefits of this novel technology were verified by demonstrating the significantly improved cyclic charge-discharge characteristics of a lithium-ion battery with a Ca-treated MXene electrode.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1021-1023
• /
• 1996

This paper proposes a design of self-tuning fuzzy rules and membership functions based on genetic algorithms. Sub-optimal fuzzy rules and membership functions are found by using genetic algorithms. Genetic algorithms are used for tuning fuzzy rules and membership functions. A arbitrary speed trajectories are selected for the reference input of the proposed methods. Experimental results show the good performance in the DC motor control system with the self-tuning fuzzy controller based on genetic algorithms.

• Journal of Environmental Science International
• /
• v.28 no.5
• /
• pp.511-520
• /
• 2019

This study was investigated to improve the phosphorus release and water quality by transformation of sedimentary P fraction for application of $CaO_2$. For the experiment, 0.5% (w/w) of $CaO_2$ was homogenized in the sediment and incubated with the control for 20 days. The analytical results showed that pH increased with $CaO_2$ and redox potential (ORP) was improved in the sediment of the reactor. The growth rate of chlorophyll-a was lower in the $CaO_2$ reactor and Dissolved Oxygen (DO) of overlying water maintained higher than that of the control. Total phosphorus (T-P) concentration in the overlying water increased from the initial concentration to 0.304mg/L in the control at 20 days. The reactor of $CaO_2$ was lowered by 29.3%. Ex-P, Fe-P and Ca-P in sediment P fraction were increased with the $CaO_2$. The formation of bound Fe-P and Ca-P in the sediments seemed to control the release of P by removing the Soluble Reactive Phosphorus (SRP) presented in the pore water. From the result, this indicated that the reduction of P release from the sediments seems to be effective in suppressing the eutrophication of P and improving the oxygen condition in the water quality with the application of $CaO_2$.