• Journal of Korean Society of Forest Science
• /
• v.5 no.1
• /
• pp.27-32
• /
• 1966

Taking an opportunity of the application of clearcutting method, 140 red pine (Pinus densiflora Sieb. et Zucc.) trees grown at Chon-nam province, the southern part of South Korea, were fellen and the tree height, clear-bole length, D.B.H. diameter at base(0.2m above from the ground line) and the length of the longest branch were measured. The correlation between factors mentioned were analysed. The results are summarized as follows: 1. The correlation between crown length and tree height (r=0.821) was sinificant. 2. The correlation between the diameter at base and D.B.H. was highly significant (r=0.961). D.B.H. can be calculated from multiplying the diameter at base by 0.88. 3. A weak relation between D.B.H and tree height was abserved. 4. The positive correlation between tree height and clear-bole-length was calculated, but it was not sharp between D.B.H. and the length of the longest branch. 5. The height, basal area, D.B.H. and volume increment by tree class calculated from the data of the stem analysis are presented (Tab. 3~10).

• Journal of the Korean Mathematical Society
• /
• v.55 no.2
• /
• pp.373-390
• /
• 2018

In this paper we study the small-data scattering of the d dimensional fractional $Schr{\ddot{o}}dinger$ equations with d = 2, 3, $L{\acute{e}}vy$ index 1 < ${\alpha}$ < 2 and Hartree type nonlinearity $F(u)={\mu}({\mid}x{\mid}^{-{\gamma}}{\ast}{\mid}u{\mid}^2)u$ with max(${\alpha}$, ${\frac{2d}{2d-1}}$) < ${\gamma}{\leq}2$, ${\gamma}$ < d. This equation is scaling-critical in ${\dot{H}}^{s_c}$, $s_c={\frac{{\gamma}-{\alpha}}{2}}$. We show that the solution scatters in $H^{s,1}$ for any s > $s_c$, where $H^{s,1}$ is a space of Sobolev type taking in angular regularity with norm defined by ${\parallel}{\varphi}{\parallel}_{H^{s,1}}={\parallel}{\varphi}{\parallel}_{H^s}+{\parallel}{\nabla}_{{\mathbb{S}}{\varphi}}{\parallel}_{H^s}$. For this purpose we use the recently developed Strichartz estimate which is $L^2$-averaged on the unit sphere ${\mathbb{S}}^{d-1}$ and utilize $U^p-V^p$ space argument.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.84-91
• /
• 2006

A heavy duty hydrogen-natural gas fueled engine can obtain stable operation at ultra lean conditions and reduce emissions extremely. Reduction of $CO_2$ in its engine is one of the most benefit. In this study, rate of hydrogen addition($R_{dH2}$) and compression ratio($\varepsilon$) were investigated including performance of this engine. As results, it was found that phenomenon of pressure oscillation when increasing $R_{dH2}$ and $\varepsilon$, it means occurring knock. It consider that pressure oscillation was increased due to fast burning speed of hydrogen. Even if same compression ratio, pressure oscillation was remarkable increased according to increasing $R_{dH2}$. Therefore, limit compression ratio of knock occurring was reduced by increasing $R_{dH2}$.

• Electronics and Telecommunications Trends
• /
• v.21 no.1 s.97
• /
• pp.35-43
• /
• 2006

X 서버는 개발된 지 20년 동안 그리 큰 변경이 이루어지지 않았다. 하지만, 그래픽 하드웨어는 사양은 3D 그래픽 고성능으로 변화되었다. X 서버는 2D 그래픽을 처리하기위한 그래픽 시스템으로 설계되었다. 3D 그래픽 처리를 위해서 OpenGL 라이브러리를X 서버와 연동하는 작업을 해왔지만 구조적으로 3D 그래픽 드로잉을 처리하는 것은 X서버이기 때문에 성능에 한계를 드러내게 되었다. 마이크로소프트사 DirectX 구조처럼직접 그래픽 하드웨어를 제어해서 3D 그래픽 처리를 구현하고 있으며 리눅스 진영은X 서버와 공존하면서 3D 그래픽 처리를 향상시키기 위한 연구를 진행하고 있다. 본 고에서는 리눅스 진영에서 현재 진행중인 향상된 3D 그래픽 처리에 대한 기술 동향을 설명한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.784-787
• /
• 2006

We have developed a RGB polymer dispersed liquid crystal film (RGB PDLC). To obtain the color display, color pigments are mixed in the prepolymer. We have presented an electro-optical performance of our cell and analyzed the electro optical properties for varying LC/ pre-polymer ratio and polymer type.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.51-63
• /
• 1981

The results of a crossbreeding experiment with a total of 315 litters and 325 pigs of Berkshires, Hampshires, Durocs, Landraces, Large Whites, eight different two-breed crosses and twelve different three-breed crosses, produced at Livestock Experiment Station from 1975 through 1979, are summarized as follows. 1. Number born alive per litter was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by the D♂${\times}$(H♂${\times}$L♀) $F_1$ mating, and smallest in the Hampshires. The pigs in the 3rd-6th parities had larger litter size at birth than those in other parities. 2. Birth weight of pig was heaviest in L♂${\times}$Lw♀ mating and lightest in the Large White. The total litter weight at birth was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Hampshires and Birkshires. 3. Litter size at weaning was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Durocs and Hampshires. The pigs in the 3rd-6th parities had larger litter size at weaning than those in other parities. 4. The total litter weight at weaning was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by H♂${\times}$(Lw♂${\times}$L♀) $F_1$♀ and Lw♂${\times}$L♀ matings, and was lighter in Durocs and Hampshires. The weaning weight of pig was largest in D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating and lightest in L♂${\times}$H♀ mating. 5. Survival rate at weaning was highest in L♂${\times}$Lw♀ mating, followed by D♂${\times}$(L♂${\times}$H♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating, and was lowest in Durocs. 6. The three-breed cross from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating had the highest average gain and lowest feed requirement per unit gain, followed by the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings. The Birkshires and Landraces ranked lowest among the 25 mating groups compared for both of the traits. Males had higher average daily gain than females by about 0.06kg and had lower feed requirement by about 0.14. 7. The three-breed crosses from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀, D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings reached 90kg body weight at younger age than the other groups. The D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ group reached 90kg at younger age than the Landrace by 39 days. 8. The dressing percentage and lean meat percentage tended to be higher in H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀, H♂${\times}$L♀ and L♂${\times}$B♀ matings compared to the other mating groups. The loin-eye area was largest in the Lw♂${\times}$L♀ mating and smallest in the B♂${\times}$L♀ mating. Males had higher dressing percentage, higher lean meat percentage and lion-eye area than females. The backfat was thinnest in purebred Hampshire and was thickest in B♂${\times}$L♀ mating. 9. The results obtained in this study suggest that the two-breed cross from Lw♂${\times}$L♀ mating, and the three-breed crosses from D♂${\times}$(Lw♂${\times}$L-♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$♀ matings are superior crossbreds for reproductive and pork prodnction performance.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.115-124
• /
• 2014

Hypercube and star graph are widely known as interconnection network. The embedding of an interconnection network is a mapping of a network G into other network H. The possibility of embedding interconnection network G into H with a low cost, has an advantage of efficient algorithms usage in network H, which was developed in network G. In this paper, we provide an embedding algorithm between HCN and HON. HCN(n,n) can be embedded into HON($C_{n+1},C_{n+1}$) with dilation 3 and HON($C_d,C_d$) can be embedded into HCN(2d-1,2d-1) with dilation O(d). Also, star graph can be embedded to half pancake's value of dilation 11, expansion 1, and average dilation 8. Thus, the result means that various algorithms designed for HCN and Star graph can be efficiently executed on HON and half pancake, respectively.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.339-352
• /
• 1977

The authors' theory developed in the preceding Paper 1 was applied to plastic deformation of ceramics, metals, alloys and single crystals. For polycrystalline substances, the flow mechanisms due to dislocation movement and grain boundary movement appear together or separately according to the experimental conditions whereas for single crystals, only the mechanism of dislocation movement appears. The parameters appearing in the flow equations $({\alpha}_{d1},\;1/{\beta}_{d1})and\;({\alpha}_{gj}/X_{gj},\;1/{\beta}_{gj})$ (j = 1 or 2), and the activation enthalpies ${\Delta}H_{k1}^{\neq}$ (k = d or g) were determined and tabulated. Here, the subscript d1 indicates the first kind of dislocation flow units and gj expresses the jth kind of grain boundary flow units. The predictions of the theory were compared with experiment with good agreement. Concerning the activation enthalpies, it was found that ${\Delta}H_{d1}^{\neq}$ 〉{\Delta}H_{g1}^{\neq}$ and that the former agrees with the activation enthalpy for bulk self-diffusion whereas the latter agrees with the activation enthalpy for grain boundary self-diffusion. These facts support the adequacy of the authors' theory which is considered as a generalized theory of plastic deformation.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.229-232
• /
• 2001

4H-SIC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco's 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8V pinch off voltage, under $V_{GS=0V}$, $V_{DS=25V}$ conditions, $I_{DSS=270㎃}$mm, $G_{m=45㎳}$mm were obtained. Through the power simulation 2GHz, at the bias of $V_{GS=-4V}$ and $V_{DS=25V}$, 10dB Gain, 34dBm(1dB compression point)output power, 7.6W/mm power density, 37% PAE(power added efficiency) were obtained.d.d.d.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.46-49
• /
• 2002

Recent trends of low-temperature polycrystalline Si (LTPS) TFT technologies are presented. Characteristics of LTPS TFT processes are compared with those of a-Si TFT's. In order to compete with well-established a-Si TFT-LCD technology, LTPS process has to be as simple as possible. One of the most critical processes, recrystallization of a-Si thin films, could be the process for the differentiation of LTPS technology. Along with these technical reviews, a recent development of the 5.0-inch LTPS TFT-LCD is presented. In order to achieve high-performance display characteristics and save the power consumption, the transflective mode is adopted. The 5.0-inch display with 186 pixel-per-inch, high-resolution LCD was measured to be 10% for the reflectance and 70:1 for the contrast ratio. This display is designed for a high information content hand-held PC (HHPC) application.