• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.45-55
• /
• 2015

Purifying leachate discharged from animal carcass disposal sites requires decisions regarding the locations and numbers of boreholes. An electrical resistivity survey, known to be effective for investigating leachate distribution, was performed to evaluate the range extent of contamination due to local hydrological properties, such as groundwater flow direction, and geological structure. Results of the survey at four sites at a landfill near Icheon and Anseong, Gyeonggi Province, showed low-resistivity zones (20-200 ohm-m) at a depth of 8 m from the surface. Sites 1-4, which contain 5, 2, 4, and 2 boreholes, respectively, were estimated to have a contaminated groundwater acquisition capability of 12.9 m, 13.7 m, 10.1 m, and 18.0 m, and measured pumping capacity of 2,040 m³, 479.8 m³, 1,492.3 m³, and 691.9 m³, respectively.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.83-91
• /
• 2015

Few studies have investigated soil management policy and soil erosion measurement, whereas the occurrence of climate change requires the establishment of robust soil management systems and appropriate control of soil erosion. In this study, we developed a smart sensor for real-time quantitative measurements of soil erosion at the watershed scale. The smart sensor consists of an ultrasonic sensor, a rainfall meter, a solar cell, an RTU (remote terminal unit),and a CDMA (code division multiple access) and it was programmed to take a measurement every 30 minutes. The depths measured by the smart sensor were compared with data from terrestrial LiDAR. Experimental results showed a strong correlation in the depth of soil erosion between LiDAR and the ultrasonic sensor for the period from 22 August to 11 October 2013. Furthermore, the correlation coefficient between soil erosion depth (mm) and soil erosion volume (m³) was 0.9063 in the lower region of the watershed and is 0.9868 in the upper region. The proposed ultrasonic sensor technique can provide high-quality data for soil conservation and management systems in the future.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.367-376
• /
• 2017

Recently, tunneling under the seabed is becoming increasingly common in many countries. In Korea, there are proposals to tunnel from the mainland to Jeju Island. Safe construction requires geologic structures such as faults to be characterized during the design and construction phase; however, unlike on land, such structures are difficult to survey seabed. This study aims to develop an algorithm that uses geostatistics to automatically derive large-scale geological structures on the seabed. The most important considerations in this method are the optimal size of the moving window, the optimal type of spatial statistics, and determination of the optimal percentile standard. Finally, the optimal analysis algorithm was developed using the R program, which comprehensibly presents variations in spatial statistics. The program allows the type and percentile standard of spatial statistics to be specified by the user, thus enabling an analysis of the geological structure according to variations in spatial statistics. The geotechnical defense-training algorithm shows that a large, linear geological lineament is best visualized using a $3{\times}3$ moving window and a 10% upper standard based on the moving variance value and fractile. In particular, setting the fractile criterion to the upper 0.5% almost entirely eliminates the error values from the contour image.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.475-487
• /
• 2017

We performed landslide flume tests to analyze characteristics of landslide occurrence and change in the ground materials due to rainfall infiltration. The test apparatus is composed of flume, rainfall simulator, and measurement sensors and landslides were triggered by heavy rainfall (Intensity=200 mm/hr) sprinkled at the above of an artificial slope. The measurement sensors for matric suction and volumetric water content were installed with 3 sets at shallow (GL-0.2 m), middle (GL-0.4 m), and deep depth (GL-0.6 m) in the slope and the tests were performed with in-situ, loose, and dense condition of each weathered soils of granite, gneiss, and mudstone. The analyses show that surface erosion was dominant in initial time of the test due to heavy rainfall and then landslides occur following locally happened transverse tension cracks. The characteristics of landslide were both shallow failure because of a spread of wetting front induced by the rainfall infiltration and retrogressive failure. While the matric suction was decreased rapidly without any precursor in the soil saturation, the volumetric water content was increased gradually, reached its maximum value, and then decreased rapidly with landslide.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.489-500
• /
• 2017

It is not rare that pseudotachylite, dark colored rock with glassy texture, is recognizable in deep core samples drilled up to 900 m from the surface. Pseudotachylite with widths varying few to 20 cm is sharply contacted or interlayered with the host rocks composed of Jurassic granite and Precambrian amphibolite gneiss, showing moderately ductile deformation or slight folding. Pseudotachylite occurring at varying depths in the deep drill core are slightly different in texture and thickness. There is evidence of fault gouge at shallower depths, although brittle deformation is pervasive in most drill cores and pseudotachylite is identified at random depth intervals. Under scanning electron microscope (SEM), it is evident that the surface of pseudotachylite is characterized by a smooth, glassy matrix even at micrometer scale and there is little residual fragments in the glass matrix except microcrystals of quartz with embayed shape. Such textural evidence strongly supports the idea that the pseudotachylite was generated through the friction melting related to strong seismic events. Based on X-ray diffraction (XRD) quantitative analysis, it consists of primary minerals such as quartz, feldspars, biotite, amphibole and secondary minerals including clay minerals, calcite and glassy materials. Such mineralogical features of fractured materials including pseudotachylite indicate that the fractured zone might form at low temperatures possibly below $300^{\circ}C$, which implies that the seismic activity related to the formation of pseudotachylite took place at shallow depths, possibly at most 10 km. Identification and characterization of pseudotachylite provide insight into a better understanding of the paleoseismic activity of deep grounds and fundamental information on the stability of candidate disposal sites for high-level radioactive waste.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.315-325
• /
• 2020

This study was performed to develop a model to predict landslides and determine the variable importance of landslides susceptibility factors based on the probabilistic prediction of landslides occurring on slopes along the road. Field survey data of 30,615 slopes from 2007 to 2020 in Korea were analyzed to develop a landslide prediction model. Of the total 131 variable factors, 17 topographic factors and 114 geological factors (including 89 bedrocks) were used to predict landslides. Automated machine learning (AutoML) was used to classify landslides and non-landslides. The verification results revealed that the best model, an extremely randomized tree (XRT) with excellent predictive performance, yielded 83.977% of prediction rates on test data. As a result of the analysis to determine the variable importance of the landslide susceptibility factors, it was composed of 10 topographic factors and 9 geological factors, which was presented as a percentage for each factor. This model was evaluated probabilistically and quantitatively for the likelihood of landslide occurrence by deriving the ranking of variable importance using only on-site survey data. It is considered that this model can provide a reliable basis for slope safety assessment through field surveys to decision-makers in the future.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.347-378
• /
• 2020

Based on monthly average groundwater recharge over a nearly 10 year period, results of fully integrated hydrologic modeling of SWAT-MODFLOW, land cover, land use, soil type and hydrologic response unit (HRU) was used to assess the dominant influencing factors of groundwater recharge spatial patterns in Jangseong district. As dominant factors, land cover was FRSE (forest-evergreen) and soil type was Samgag. Landsat-8 OLI imaging spectrometer data were acquired in the period 2003 to 2004 and seasonal bare soil lines (BSL) were estimated through NIR-RED plot. Extent of slope of BSL was from 1.092 to 1.343 and the intercept was from -0.004 to -0.015. To know correlation between spatial groundwater recharge and soil-vegetation indices (PVI, NDVI, NDTI, NDRI), this study employed frequency and regression analysis. On May, RED band increased up 3 to 4 times compared to other seasons and only one turning point appeared as recharge-index with upward parabola bell shape as results of existing research. Considering precipitation, if the various studies for relationship between groundwater recharge and soil-vegetation index just like NDVI are performed, it is possible to estimate groundwater recharge through analyzing remote sensing data.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.200-215
• /
• 2018

This research refers to the importance of health care in relation to the establishment of health care facilities and health care facilities in the rapidly changing health care environment, and the influence of health care in relation to the customer's satisfaction with health care. Orthographic analysis First, a hypothesis was adopted that the attractiveness of building materials will affect the positive (+) impact of the customer's satisfaction. Second, the hypothesis that the transport infrastructure will have a significant impact on the customer's satisfaction with the customer's satisfaction has been denied. Third, the hypothesis that the building appeal will have a significant effect on the health of the medical industry is adopted. Fourth, the hypothesis that the transport infrastructure will have a significant impact on health care is adopted. Fifth, the hypothesis that medical integration will have a significant impact on the customer's satisfaction with the customer's satisfaction is adopted. Sixth, the hypothesis that the relationship between the building and the customer's satisfaction in relation to the relationship between the client and the client was found to be partly attributable to the fact that there was a partial role. The assumption that the relationship between the transport infrastructure and the customer's satisfaction in relation to the traffic infrastructure was established has been identified as a complete parameter. The results of this study could be applied to provide the basis for selecting the location for future health care facilities.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.2
• /
• pp.91-97
• /
• 2010

Purpose: The purpose of this study was to evaluate the results of treatment for longitudinal meniscal tear in ACL rupture patients by clinical evaluation and $2^{nd}$ look arthroscopy. Materials and Methods: Among the patients who underwent surgery due to ACL rupture and longitudinal meniscal tear between 2002~2009, 32 patients were selected for the study. The patients were devided into three groups; group 1 had repair, group 2 had partial menisectomy due to impossible to repair, group 3 had conservative treatment due to stable meniscus. Comparative retrospective analysis was applied with KT 1000 arthrometer, Lysolm' score, Tegner activity score, IKDC subjective score, and $2^{nd}$ look arthroscopy. Results: Lysolm' score, Tegner activity score, IKDC subjective score showed no statistical difference in all three groups. KT-1000 side to side difference improved from 6.2, 6.15, 6.38 before surgery to 2.56, 2.49, 2.58 after surgery in group 1, 2, and 3, respectively. In group 1, second-look arthroscopy revealed complete healing in 12 patients, incomplete healing without any clinical symptoms in 2, and healing failure in 1. In group 2, second-look arthroscopy showed partial regeneration on margin of meniscectomy. In group 3, second-look arthroscopy revealed complete healing in 2 patients, while 4 showed incomplete healing so that have repaired. Conclusion: In the study, the outcome was better when the stable longitudinal meniscal tear on posterior horn with ACL rupture had active treatment.

• Health Policy and Management
• /
• v.23 no.1
• /
• pp.35-43
• /
• 2013

Background: Diagnosis procedure combination (DPC) has recently been introduced in Korea as a demonstration project and it has aimed the improvement of accuracy in bundled payment instead of Diagnosis related group (DRG). The purpose of this study is to investigate that the model of end-stage liver disease (MELD) score as the severity classification of liver diseases is adequate for improving reimbursement of DPC. Methods: The subjects of this study were 329 patients of liver disease (Korean DRG ver. 3.2 H603) who had discharged from National Health Insurance Corporation Ilsan Hospital which is target hospital of DPC demonstration project, between January 1, 2007 and July 31, 2010. We tested the cost differences by severity classifications which were DRG severity classification and clinical severity classification-MELD score. We used a multiple regression model to find the impacts of severity on total medical cost controlling for demographic factor and characteristics of medical services. The within group homogeneity of cost were measured by calculating the coefficient of variation and extremal quotient. Results: This study investigates the relationship between medical costs and other variables especially severity classifications of liver disease. Length of stay has strong effect on medical costs and other characteristics of patients or episode also effect on medical costs. MELD score for severity classification explained the variation of costs more than DRG severity classification. Conclusion: The accuracy of DRG based payment might be improved by using various clinical data collected by clinical situations but it should have objectivity with considering availability. Adequate compensation for severity should be considered mainly in DRG based payment. Disease specific severity classification would be an alternative like MELD score for liver diseases.