• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.21-34
• /
• 1989

Chindong granites are classified into granodiorite, tonalite and quartz-diorite, and Yucheon - Eonyang granites into monzo-granite by the Streckeisen diagram. These granitic rocks of Cretaceous age show trend of calc-alkaline magma, and the magmatic evolution from basic to acidic rocks is consistant with the general crystallization path of the Cretaceous granitic rocks in the Gyeongsang basin. On the basis of petrological and petrochemical data, variation of major elements (K, Na, Ca, Mg) and trace elements (Rb, Sr, Ba) including ore metals (Cu, Pb, Zn) in the Cretaceous granitic rocks were studied in detail in order to investigate geochemical difference of the granitic rocks in relation to mineralization between Cu province and Pb-Zn province in the Gyeongsang basin. There is clear difference in content of the major elements between Chindong granites and Yucheon-Eonyang granites : Chindong granites have low content of K (1.62%) and Na (2.53%), and high content of Ca (3.75%) and Mg (1.42%) whereas Yucheon-Eonyang granites have high content of K (3.56-3.60%), and low content of Ca (0.96-0.26%) and Mg (0.26-0.21%). There is also clear difference in content of trace lithophile elements between Chindong granites and Yucheon-Eonyang, granites : Chindong granites have low content of Rb (86ppm) and Ba (330ppm), and high content of Sr (405ppm) while Yucheon-Eonyang, granites have high content of Rb (144-161ppm) and Ba (983-1030ppm), and low content of Sr (157-136ppm). The lithophile trace elements of Rb and Sr vary with close relationship to major elements of K and Ca, respectively. Therefore, Chindong granites are much easily distinguished from Yucheon-Eonyang granites by using relationship of K with Rb and Ca with Sr : K<3%, Rb<100ppm, Ca<2% and Sr>200ppm for Chindong granites, and K>3%, Rb>100ppm, Ca<2%, and Sr<200ppm for Yucheon-Eonyang granites. There is not clear difference in content of trace ore metals between Chindong granites and Yucheon-Eonyang granites : Chindong granites of the Cu province have low Cu content (15ppm) which is nearly equal to 13-14ppm of Yucheon-Eonyang granites of the Pb-Zn province, and Yucheon-Eonyang granites have Pb content (29-27ppm) which is rather lower than 37ppm of Chindong granites. But Cu is anomalously high in the mineralized part of Chindong granites in Gunbuk-Haman area, and Zn is apparently higher in Yucheon-Eonyang granites (51-37ppm) than in Chindong granites (29ppm). K/Pb ratio is also c1early distinguishable between Chindong granites (<850) and Yucheon-Eonyang granites (>850). Thus, it may be possible to apply geochemical difference of the granites to distinguish whether a Cretaceous granitic body is Cu related rock or Pb-Zn related rock, and whether it belongs to Cu province or Pb-Zn province in the Gyeongsang basin.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2022.03a
• /
• pp.37-38
• /
• 2022

• Journal of Environmental Health Sciences
• /
• v.44 no.3
• /
• pp.227-237
• /
• 2018

Objectives: This study was investigated the characteristics of small-scale water works (SWW) in Gyeongnam area and conduct a health risk assessment of water-quality inspection items unfitted for water-quality standards (WQS). Methods: The characteristics of SWW in Gyeongnam province were analyzed using the data of SWW in the last three years (2014~2016) published in National Waterworks Information System. In addition, the health risk assessment for inspection items unfitted for WQS was carried out in four steps: hazard identification, dose-response assessment, exposure assessment, and risk characterization. Results: The total number of SWW in Gyeongnam area was gradually decreased from 2014 to 2016. In addition, drinking water sources of SWW were in the order of ground water, valley water, spring water, surface water, and river-bed water. The number of points unfitted for WQS in SWW by year was 22, 45, and 18 in 2014, 2015, and 2016, respectively, and a total of 112 points were found to unfit for WQS in SWW during 2014~2016. The hazard quotient (HQ) for fluoride, nitrate nitrogen, boron in the unfitted points for WQS was more than 1.0, and the mean values for turbidity and color in points unfitted for WQS were 2.38 nephelometric turbidity unit and 16.25 color unit, respectively. Conclusions: The HQ for fluorine, nitrate nitrogen and boron was more than 1.0 in points unfitted for WQS among SWW in Gyeongnam area, and the turbidity and the color degree exceeded WQS, which mean that there is a possibility of harmful impacts on the human health.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1262-1272
• /
• 2007

The purpose of this study was to examine the development trend of smart fiber by textile companies in Daegu/North Gyeongsang Province. This examination includes the development fields of smart fiber, investment size, information sources and the use degree of those, research-related infrastructure, relationship between companies' characteristics and their interests in smart fiber. Research data were collected by a survey. The definition and classification(4 areas and 12 development products) of smart fiber followed ones of Smart Fiber Technology Roadmap by the Ministry of Commerce, Industry and Energy. Data were analyzed using SPSS 11.0 program for frequency, means, t-test, and $X^2$-test. Among respondents, the numbers of dying and finish companies and export traders were the highest. It revealed that 19.6% of companies were developing smart fibers. Within 12 development products, vapor permeable/waterproof fiber showed to be most being developed, while medical fiber for human has not been developed and wasn't made an investment plan for developing. It was discovered that the biggest problem of smart fiber development was the lack of experts and the best outcome of smart fiber development was preoccupation of future market. It showed that companies got information from textile fairs but didn't often use information sources. The companies appeared to have a weak intention about research of smart fiber. The more important a company considered functionality of textile products and the more innovative and stabler the company was, the higher interest in smart fiber companies had. It was concluded that textile companies in Daegu/North Gyeongsang Province were aware of the importance of smart fiber development but they were not strongly interested in it and not enthusiastic in taking action on it.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.475-499
• /
• 2023

To infer the provenance of raw iron materials utilized in iron production at the archaeological sites in Gyeongsang province, petrographic and geochemical analyses were conducted for smelting samples and major iron ores sourced from ore deposits. The smelting samples excavated from various iron archaeological sites were classified into different types according to their refining processes, such as iron bloom, iron bloom slag, pig iron, pig iron slag, forging iron flake, smithery iron, iron flake, and arrowhead. These samples exhibited discernable differences in their mineralogical components and texture. The enrichments of major elements such as aluminum and calcium in silicate minerals of the residual slags and the high contents of trace elements such as nickel and copper in some iron-making relics reflect the characteristics of raw iron ores, and thus can be regarded as potential indicators for inferring the provenance of source materials. In particular, the compositional ranges of Pb-Sr isotope ratios for the iron smelting samples were classified into three categories: 1) those exhibiting similar ratios to those of the raw iron ores, 2) those enriched in strontium isotope ratio, and 3) those enriched in both lead and strontium isotope ratios. The observed distinct Pb-Sr isotope characteristics in the iron smelting samples suggest the potential contribution of specific additives being introduced during the high-temperature refining process. These results provide a new perspective on the interpretation of the provenance study of the iron archaeological samples in Gyeongsang province, particularly in terms of the potential contribution of additives on the refining process.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.139-140
• /
• 2018

영남의 좌도(左道)는 조선통신사들이 지나는 연행로에 있는 지역이다. 통신사 일행이 지나는 영남좌도의 주요 읍(邑)에서는 통신사들을 위한 공식적인 연향(宴享)이 있었다. 연향에는 영남좌도의 교방(敎坊)에 소속된 기녀(妓女)들의 교방춤이 연희되었다. 연구자는 영남좌도의 통신사 길을 따라 연행되었던 교방춤의 양상을 살펴보는 것이 연구의 목적이다.

• Journal of Urban Science
• /
• v.9 no.1
• /
• pp.41-49
• /
• 2020

This study analyzed the factors affecting economic growth using multiple regression model and Geographically Weighted Regression in consideration of population, industry and employment, housing and political characteristics on economic growth by region. The analysis results are summarized as follows. First, the total employment growth rate, manufacturing employment growth rate, local election turnout and the level of party consensus between the central and local governments are having a positive impact on regional economic growth. Second, according to the GWR analysis, the population has a positive impact on economic growth in the southern region of Korea, and the increase in the total number of employees has a positive impact on the southern region of Gyeonggi Province, Gangwon Province, North Chungcheong Province and North Gyeongsang Province. Finally, the voter turnout of urbanites is positively affecting economic growth in South Chungcheong Province, Gangwon Province and the southern coast, while North Jeolla and South Jeolla provinces have a positive impact on economic growth as the parties of the central and local governments are equal. The results of this study may suggest the role of local government for regional economic development.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.547-555
• /
• 2014

Objective: This study was conducted to investigate the association between subjective distress symptoms and argon welding among workers in Gyeongnam Province shipyard. Method: 31 argon and 29 non-argon welding workers were selected as study subjects in order to measure concentrations of personal dust, welding fumes and other hazardous materials such as ZnO, Pb, Cr, FeO, MnO, Cu, Ni, $TiO_2$, MgO, NO, $NO_2$, $O_3$, $O_2$, $CO_2$, CO and Ar. An interviewer-administered questionnaire survey was also performed on the same subjects. The items queried were as follows: age, height, weight, working duration, welding time, welding rod amounts used, drinking, smoking, and rate of subjective distress symptoms including headache and other symptoms such as fever, vomiting and nausea, metal fume fever, dizziness, tingling sensations, difficulty in breathing, memory loss, sleep disorders, emotional disturbance, hearing loss, hand tremors, visual impairment, neural abnormality, allergic reaction, runny nose and stuffiness, rhinitis, and suffocation. Statistical analysis was performed using SPSS software, version 18. Data are expressed as the mean ${\pm}SD$. An ${\chi}^2$-test and a normality test using a Shapiro wilk test were performed for the above variables. Logistic regression analysis was also conducted to identify the factors that affect the total score for subjective distress symptoms. Result: An association was shown between welding type (argon or non-argon welding) and the total score for subjective distress symptoms. Among the rate of complaining of subjective distress symptoms, vomiting and nausea, difficulty breathing, and allergic reactions were all significantly higher in the argon welding group. Only the concentration of dust and welding fumes was shown to be distributed normally after natural log transformation. According to logistic regression analysis, the correlations of working duration and welding type (argon or non-argon) between the total score of subjective distress symptoms were found to be statistically significant (p=0.041, p=0.049, respectively). Conclusion: Our results suggest that argon welding could cause subjective distress symptoms in shipyard workers.

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.205-220
• /
• 2005

This study was conducted to investigate the effect of the addition of glycine betaine to the diet on growth performance in pigs. A total of 400 pigs were divided into 4 feeding stages(Growing I: 23.10 $\pm$ 1.43, Growing II: 37.69$\pm$ 1.62, Finishing I: 66.51 $\pm$3.44 and Finishing II: 90.42$\pm$ 2.17 kg of initial body weight) then each feeding stage was divided into 4 treatment groups(Control: 0 0/0, Tl : 0.2 0/0, T2: 0.4% and T3 : 0.6 % of glycine betaine, respectively). The average daily gain and feed efficiency of T2 and T3 were significantly increased(p< 0.05) by dietary glycine betaine in stage I, 2 and 3. This result indicates that dietary glycine betaine could influence the pig growth performance. In feeding stage 4, the average daily gain and feed efficiency were significantly increased in 0.4% glycine betaine feeding group compared with other dietary groups(p < 0.05). Results suggest that feeding the pigs 0.4 % glycine betaine could be the most efficient dietary level. Crude protein, ether extract and crude ash digestibilities of 0.4% glycine betaine fed group were significantly increased compared with those of control group(p < 0.05). However, no significant difference was found in nutrient digestibilities among glycine betaine fed groups. Apparent faecal amino acid digestibilities of 0.4% glycine betaine fed group were more significantly higher than that of control group. The 0.4% glycine betaine fed group was significantly increased in apparent faecal amino acid digestibility compared with those of other glycine betaine fed group. No significant difference was shown in amount of microflora population between control and glycine betaine fed groups. Ammonia and hydrogen sulfide gas emission were significantly decreased in 0.4% glycine betaine feeding group compared with other dietary groups(p < 0.05).

• Journal of Korean Home Economics Education Association
• /
• v.18 no.2 s.40
• /
• pp.47-62
• /
• 2006

This research was conducted to find out price change of education service. Consumer Price Index annual series data in Korea National Statistical office from 1990 to 2004 were used for analysis. First, education price indexes showed an average annual increase of 7.3% during the last 15 years (1990-2004), marking the highest increase among items in the CPI basket. The average annual increase in tuition fees and other fees, expenditure classes of education price. has been 7.5% and 6.0%, respectively. Secondly, an average increase in tuition fees for two-year college was higher, followed by tuition fees for kindergarten, private four-year college, national four-year college and secondary schools. An average increase in primary school textbook costs was higher in the category of 'other fees' followed by junior high school textbook costs, junior high school supplementary book costs and home delivery supplementary book costs Thirdly, there were no differences in price changes of secondary school textbooks, junior high school supplementary books, high school supplementary books among 16 locations. An average increase in after-school education (selective subjects) for college entrance examination was higher in Gwangju but lower in Seoul, compared with other cities. An average of 7% difference was seen annually among regions. When the year 2000 was considered as 100, the most significant gains were seen in Kwangju at 80% and Gangwon at 57%. An increase in after-school education (all subjects) for college entrance examination was higher in South Cholla Province but lower in North Gyeongsang Province. An increase in after-school education (all subjects) for college entrance examination was higher in South Cholla Province but lower in North Gyeongsang Province. An average of 7% difference was seen annually in the annual increase. When the year 2000 was considered 100, most significant increase was seen in Busan and South Gyeongsang Province at 37% and Jeju Island at 34%.