• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.271-273
• /
• 1991

We have developed 154kV XLPE (Cross-linked Poly-ethylene) Cable accessories which show excellent performances. The results obtained from experiments using miniature model justified our electrical design and adopted materials, and assembly tests verified higher reliability of these accessories. Basic concepts of design and test, test results and failure analysis are presented.

• 대한중풍순환신경학회지
• /
• 제6권1호
• /
• pp.55-62
• /
• 2005

Dysphagia is an important complication for the rehabilitative treatment and life quality of stroke patients. This report is about two patients with dysphagia after stroke who were treated with Pyungwesan and Bowhawhan. The severity of the patient's dysphagia was evaluated with stage of dysphagia according to severity. After treatment, dysphagia were remarkably improved(from stage 5 to 2, 5 to 1). This result shows that Pyungwesan and Bowhawhan could be effective against dysphagia after stroke.

• 한국주거학회논문집
• /
• 제13권4호
• /
• pp.27-33
• /
• 2002

In Gumi area, the heating and cooling loads for underground building could have not been correctly evaluated since there were no systems accurate underground temperature. For solving this problem two ways of predicting the underground temperature were propose. Firstly, it is to estimate the underground temperature of Gumi area by averaging out the underground temperature of the areas around Gumi city. However, the underground temperature data of the areas around Gumi city was only limited to 0.5m and 1.0m under the ground. Secondly, it is to calculate the underground temperature of Gumi area by using a periodic equation with variable about underground properties. Among these methods, the method of the average date was more correct, but the method of the variable date was more available.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.181-183
• /
• 2002

A new 10.4" transflective TFT-LCD has been developed using newly designed color filter for sunlight readable application. High transmittance and color gamut are realized by the dual color filter and dual cell gap structure in the ECB mode. The color gamut of new device provides 17% in transmissive and 18% in reflective mode. This new device provides the $125cd/m^2$ of luminance, 240:1 and 27:1 of contrast ratio in the transmissive and reflective mode, respectively.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.173-181
• /
• 2010

This study was conducted to investigate the possible installation of small hydro-power plant at the discharge point of Gumi sewage treatment plant (STP) using treated wastewater. Sufficient amount of water to transfer to electric power and the selection of proper location are two essential elements for the construction of small hydro-power facility. Preliminary analysis based on site visit and existing data in Gumi STP were made. Capacity of the small hydro-power plants and exact location were determined by geomorphological condition and flow duration characteristics. Flow duration characteristics and its duration curve were identified using monthly rainfall data in Gumi STP. Relevant facts of small hydro-power system in other STP were referred to adopt to Gumi STP situation. Flowrate of treated effluents and effective head between flow chamber and the location of hydraulic turbine in Gumi STP are found to be $3.70m^3$/sec and 3.5m respectively. Electric generation rate based on this feasibility study was estimated to be 86.3kW/h. Yearly electric generation rate was expected to be 932.4MMh. Proposed small hydro-power plant construction in Gumi STP is to be reasonable.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.254-254
• /
• 2008

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.146-146
• /
• 2008

• 센서학회지
• /
• 제26권1호
• /
• pp.56-59
• /
• 2017

This paper presents the Inkjet-printed strain gauge using PEDOT:PSS. The strain gauge (width 0.6 mm, length 20 mm, thickness $0.3{\mu}m$) was printed on the PET film using PEDOT:PSS ink. The resistance variation of the fabricated strain gauge was measured by the digital multi-meter with the displacement range of -4 to 10 mm. As the measured result, resistance variation (${\Delta}R/R_0$) has approximately 0.75%, linearity of 99.87%. The fabricated strain gauge is expected to the various applications such as tape type pressure sensor, PMS(pressure mapping sensor), wearable devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.277-280
• /
• 1991

We have developed 154kV OF cable accessories from 1987. 4 to 1990. 10 by doing assembly design, investing equipment, manufacturing inspecting parts, type testing in labortary, in our company, in KEPCO. The one of those accessories. Oil Stop Joint, has been developed by using Shield Metal Embeded Type Epoxy Unit. This is More reliable than old type.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.285-287
• /
• 2022

4차 산업환경에서 스마트 팩토리는 자동 자재 관리 시스템(Automated Material Handling System, AMHS)의 사용이 증가되고 있으며, 이로 인한 자재 관리의 효율성이 중요시되고 있다. 자동 무인 운반차(Automated Guided Vehicle, AGV)는 이러한 분야에 활용성이 높기 때문에 많은 연구와 발전이 이루어지고 있다[1]. 기존의 AGV System에 대한 연구들은 운영 방식 그리고 경로 유도 방식에 대한 연구가 집중되고 있어서, 실질적인 산업현장에서 요구하는 가격 절감에 대한 연구가 부족한 상황이다[2]. 따라서 본 논문에서는 AGV를 구동시키기 위해서 2개의 BLDC Motor를 하나의 DSP로 구현하는, 새로운 형태의 BLDC Motor 구동방식을 제안하고 실험으로 확인하였다.