• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1991

The temperature profile of Czochralski single crystal growth system was simulated considering the fluid flow and surface radiation heat transfer. View factors of surface elements were calculated for radiation heat transfer. Two phases(solid and liquid) were treated as a continuous phase by assigning artificial large viscosity to the solid phase and latent heat was accounted by iterative heat revolution method. The solidification model was applied to solid front of the pure Ga during the melting to verify the model. The whole simulation model of CZ system was applied to the growth Al single crystal.

• Journal of Mushroom
• /
• v.22 no.1
• /
• pp.8-16
• /
• 2024

Paecilomyces tenuipes (P. tenuipes) is a fungus cultivated artificially by South Korean researchers, utilizing rice bran as its substrate. The increased demand for this fungus has not been met with successful cultivation methods for fruiting body production in natural environments. Therefore, we tested the effect on the growth of P. tenuipes using a Solid media based on pests. In this results, the Solid media based on M.alternatus was effective in increasing the growth of P. tenuipes and the content of cordycepin. Moreover, we confirmed the conditions for manufacturing a Solid media based on M.alternatus for P. tenuipes growth. We suggested that the growth-promoting compounds offers valuable insights for optimizing fungal cultivation conditions, thereby enhancing productivity and contributing to a broader understanding of fungal physiology in varying nutritional environments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.328.2-328.2
• /
• 2014

Semiconductor nanowires (NWs) have attracted research interests due to the distinct physical properties that can lead to variousoptical and electrical applications. In this paper, we have grown InAs NWs viagold (Au)-assisted vapor-liquid-solid (VLS) and catalyst-free vapor-solid (VS) mechanisms and investigated on the p-type doping profile of the NWs. Metal-organic chemical vapor deposition (MOCVD) is used for the growth of the NWs. Trimethylindium (TMIn) and arsine (AsH3) were used for the precursor and diethyl zinc (DEZn) was used for the p-type doping source of the NWs. The effectiveness of p-type doping was confirmed by electrical measurement, showing an increase of the electron density with the DEZn flow. The structural properties of the InAs NWs were examined using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In addition, we characterize atomic distribution of InAs NWs using energy-dispersive X-ray spectroscopy (EDX) analysis.

• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.127-132
• /
• 1998

In order to fad out an efficient way of topdressing nitrogen fertilizer in mulch-cropping system of onion(Allium cepa L.), solid, slow-release, and liquid forms of nitrogen fertilizers were allied to cv. 'Changnyungdaego' various number of times at different time, with 5 topdress applications of solid fertilizer serving as a control. Whole basal application of conventional solid fertilizer and 2 slow-release fertilizers were labor-saving and showed improved storage quality of bulbs, but resulted in poor plant growth and considerably low yield due to fertilizer shortage from early April. This suggests that topdress application is necessary. Liquid form of nitrogen fertilizer was more effective for plant growth and yield and saving labor than the solid form. Early applications was effective for increasing yield and storage quality of onion bulbs harvested. Thus two applications of liquid form of nitrogen fertilizer in February and March at rome month interval are recommended in mulch crowing system of onion.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.145-150
• /
• 2018

A new methodology, the crack-spallation model, has been developed to analyze gas-solid reactions dominated by crack growth inside of the solid reactant and spallation phenomena. The new model physically represents three processes of the reaction progress: (1) diffusion of gas reactant through pores; (2) growth of product particle in pores; and (3) crack and spallation of solid reactant. The validation of this method has been conducted by comparison of results obtained in an experiment for oxidation of $UO_2$ and the shrinking core model. The reaction progress evaluated by the crack-spallation model shows better agreement with the experimental data than that evaluated by the shrinking core model. To understand the trigger point during the reaction progress, a detailed analysis has been conducted. A parametric study also has been performed to determine mass diffusivities of the gas reactant and volume increase constants of the product particles. This method can be appropriately applied to the gas-solid reaction based on the crack and spallation phenomena such as the voloxidation process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2016

The effects of fermented fecal solid diets on the growth of the sea cucumber Apostichopus japonicus was investigated in a recirculating aquaculture system (RAS) during a 90-day experiment at 16.5-17.5℃, 32±0.5 psu salinity, pH 7.9-8.2, and 5.2-7.1 mg/L dissolved oxygen. The aim was to determine the feasibility of RAS fecal solid waste as a renewable feed for A. japonicus. In this study, unfermented fecal solid (UF), fermented fecal solid (FF), and commercial feed (CF) diets were used. The results showed that the growth rate did not differ significantly (P>0.05) between A. japonicus fed FF and CF; however, the growth rates of A. japonicus fed FF and CF were ~50% higher than that of those fed UF. Thus, utilization of fecal solid by A. japonicus may overcome the problem regarding accumulation of RAS waste. Use of a fermentation process would improve utilization of fecal solid as a renewable food source for A. japonicus.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.417-423
• /
• 1999

Detailed description of the crystal growth methods permitting one to obtain complicated shape crystals from the melt is given. The variable shaping technique provides the growth of crystals with a discrete altering cross-section configuration during crystallization. The dynamic local shaping technique enables one to grow items with a continuous alteration of the side surface profile by a preset program.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.19-24
• /
• 2006

The alumina-aluminum solid-liquid interfaces were directly observed at atomic scale by heating the alumina single crystal in high-voltage electron microscope (HVEM) owing to the electron beam damage processes, Atomic ordering in the first several layers of the liquid was clearly resolved adjacent to the alumina surface and its relevance to the single crystal growth was examined with the real-time observations.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.77-82
• /
• 1992

When a crystal is grown by FZ process, the melt zone is located at between the solid of upper and lower side and is kept by the solid-liquid interface tension. On the surface of the melt zone, a surface tension gradient is occured by the difference of temperature and solute concentration, it is the driving force of marangoni flow. The crystal even in the steady state growth can become imperfect for the dislocation distribution and the solute concentration in the peripheral region of the crystal are higher than those in the inner part and the probability of the formation of the defects such as voids, bubble penetration, secondary phase creation and crack is high near the solid-liquid interface. This is because the solid -liquid interface becomes irregular because of the local variation of temperature in that region due to marangoni convection.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.243-248
• /
• 2000

Effect of NiO addition on microstructure, stability of tetragonal phase and mechanical properties was investigated. (Y, Ni)-TZP solid solution was obtained by pressureless sintering. The fracture toughness was increased by solid solution of NiO. Neither reaction phase nor glassy phase was observed at the grain boundaries. From these results, it was determined that solid solution of NiO was destabilized tetragonal phase of Y-TZP. Y-TZP/Ni nanocomposite that contained nano-sized Ni particles was also fabricated by internal reduction method. Some evaluations and discussions were carried out for both (Y, Ni)-TZP solid solution and Y-TZP/Ni nanocomposite.