• Journal of the Korean institute of surface engineering
• /
• v.43 no.6
• /
• pp.255-259
• /
• 2010

In this work, Ni-Co composites incorporated with nano-sized SiC particles in the range of 45-55 nm are prepared by electroplating. The effects of plating duration on the chemical composition, surface morphology, crystalline structures and hardness have been studied. The maximum hardness of Ni-Co-SiC composite coating is approximately 633 Hv at plating duration of 1 h. The hardness is gradually decreased with increasing plating duration, which can be attributed to the growth of crystalline size and the agglomerates of SiC nano-particles. It is therefore explained that the grain refinement of Ni-Co matrix and stable dispersion of SiC particles play an important role for strengthening, which indicate Hall-Petch relation and Orowan model were dominant for hardening of Ni-Co-SiC composite coatings.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.2
• /
• pp.116-125
• /
• 1999

Objectives: The purpose of this study is to investigate the effect of exercise load on sleep structure and stress hormone secretion during sleep. Methods: Five male physical education students were included in this study after giving their written, informed consents in the Research Institute for Sports Science at the University of Hanyang. All subjects have performed for at least 3 years in a regular aerobic exercises such as football, basketball, and running. The subjects were divided into three groups ; NOE(non-exercise), MDE(middle duration exercise), LDE(long duration excercise). MDE group maintained a total of 120 min exercise, and LDE group maintained a total of 300 min exercise by football, basketball or badminton. All subjects were acclimatized to the experimental sleep condition by spending one night under expermental conditions, including the placement of an intravenous catheter. During the subsequent night(24:00-08:00), somnopolygraphic sleep recordings were obtained, and blood for measuring growth hormone, cortisol, testosterone, and $\beta$-endorphin was collected every 120 min throughout the night. Blood samples were obtained from prominent forearm veins of subjects. Then, the samples were immediately placed in ice and centrifuged within 10 min at 3000 rpm at $4^{\circ}C$. Statistical analyses were performed using the SPSS/$PC^+$. Data were analyzed by one-way ANOVA with repeated measures. Results: No significant differences among groups were observed in sleep latency, total sleep time, stage 2 sleep, and slow wave sleep. However, daytime exercise produced significant changes in stage 1 sleep, REM sleep, stage 2 sleep latency, REM sleep latency and sleep efficiency. Stage 1 sleep, stage 2 sleep latency, and REM sleep latency significantly increased in LDE compared to those of NOE and MDE groups. But the amount of REM sleep significantly decreased in LDE. Sleep efficiency of MDE was higher than those of NOE and LDE. The blood concentrations of growth hormone, testosterone, and cortisol during night sleep were significantly lower in LDE than in NOE. $\beta$-endorphin concentrations in blood during night sleep were not different among groups. Conclusion: The daytime exercise load was significantly related to sleep structure and stress hormone secretion during night sleep. Long duration exercise showed a harmful effect on sleep structure and hormone secretion. However, middle duration exercise had a beneficial effect on sleep structure and hormone secretion during sleep.

• Journal of Plant Biology
• /
• v.37 no.4
• /
• pp.397-402
• /
• 1994

Possible roles of polyamines in the inhibition of cell elongation in Ranunculus petioles were investigated. Exogenously apoplied polyamines greatly inhibited the auxin-induced petiole growth, while treatment of the tissue with $\alpha$-difluoromethylarginine, the inhibitor of putrescine biosynthesis, further enhanced the growth in the presence of IAA. Inhibitory effect of spermine can also be apparent for fusicoccin-induced elongation, but not for growth induced by a low pH. Spermine also suppressed the ethylene-enhanced growth in the presence of auxin. Using computer-based video digitizer system, the inhibitory effects of spermine on petiole growth were kinetically analyzed. Auxin-induced growth was characterized by an initial and transient growth with a highly elevated rate followed by a steady growth with a slightly reduced rate. Spermine treatment was found to shorten the duration of the initial phase of growth, and to reduce the rates of both the initial and steady growth as well. The latent period for auxin induction was not affected by spermine.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.71-77
• /
• 1999

The study aimed to identify effect of shading rate and duration on the growth and flowering of Lilium species in faring culture. Plant height of 'Gelria' and 'Casablanca' increased by higher shading at early growth stage, whereas that of 'Jolanda' and 'Dream Land' decreased. Also, plant height of 3 cultivars except 'Gelria' were longer by higher shading at whole growth stage, that of 'Gelria' was shorter as compared to in untreated plants. In cultivar 'Gelria', blasting increased and days to flowering shorted in higher shading only except 100% shading treatment at early growth stage. In 100% shading treatment, Blasting of 'Jolanda' was occurred 15.7% and the number of flower buds of 'Dream Land' and 'Casablanca' were reduced. Flower buds of 'Gelria' were not induceded in continued shading condition regardless of shading degree, the number of flower buds and flower size of 'Jolanda' and 'Dream Land' was reduced by 75% and 50% shading, respectively and in 'Casablanca', days to flowering was longer by shading at whole growth stage. Growth of daughter bulbs in 'Gelria', 'Jolanda' and 'Dream Land' was not influenced by shading at early growth stage but those of 'Casablanca' was inactive. Whereas that of 4 cultivars were inactive in continused shading condition.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2012

Growth patterns of the Manila clam, Ruditapes philippinarum in each tidal level were studied in the intertidal zone in Tae-an on the west coast of South Korea from April to August 2009. Environmental factors and the specimens of R. philippinarum were monthly collected at three intertidal locations: low intertidal zone, low-middle intertidal zone and middle intertidal zone. Temperature of sediment in low intertidal zone were lower than those in other intertidal locations. Concentrations of Chl-${\alpha}$ were not significantly different between in each tidal level. Exposure hours in low intertidal zone were shorter than those in other intertidal locations. Density of each year class in low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone. Growth factors of R. philippinarum in low intertidal zone were better than those in other intertidal locations. The growth rate of under one year class individuals of low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone, before the main recruitment period of R. pilippinarum. Although the growth patterns of R. philippinarum may be affected by various environmental factors, we suggests that the exposure duration is the main affect in the growth patterns of R. philippinarum in intertidal zone.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.35-35
• /
• 2002

Atomic force microscopy was applied to study the formation and growth mechanism of thin chrome layers prepared under various pulse plating conditions. The chrome was electro-deposited from an electrolyte bath containing 250 gl-l of chromic acid, 25 gl-l of sulfuric acid using direct current density of $1.6{\;}mA.$\textrm{mm}^{-2} and pulse currents with on-off time from 5 to 900 ms. The higher current density enhanced nucleation rate which resulted in refining grain size. The chrome growth kinetics determining nodule size and shape significantly depends on the duration of on-time rather than duration of off-time and on/off time ratio.

• KCID journal
• /
• v.19 no.1
• /
• pp.87-96
• /
• 2012

Information of local solar radiation is essential for many field, including water resources management, crop yield estimation, crop growth model, solar energy systems and irrigation and drainage design. Unfortunately, solar radiation measurements are not easily available due to the cost and maintenance and calibration requirements of the measuring equipment and station. Therefore, it is important to elaborate methods to estimate the solar radiation based on readily available meteorological data. In this study, two empirical equations are employed to estimate daily solar radiation using Cheongju Regional Meteorological Office data. Two scenarios are considered: (a) sunshine duration data are available for a given location, or (b) only daily cloudiness index records exist. Simple linear regression with daily sunshine duration and cloudiness index as the dependent variable accounted for 91% and 80%, respectively of the variation of solar radiation(H) at 2011. Daily global solar radiation is highly correlated with sunshine duration. In order to indicate the performance of the models, the statistical test methods of the mean bias error(MBE), root mean square error(RMSE) and correlation coefficient(r) are used. Sunshine duration and cloudiness index can be easily and reliably measured and data are widely available.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.4
• /
• pp.175-184
• /
• 2019

To improve productivity in the architecture, construction and engineering industry, it is critical to understand both current and historic trends in construction productivity. This study analyzes and compares construction productivity trends of South Korea, the U.S., the U.K., and Japan 1995 to 2015 using the following three measures: construction labor productivity, construction duration per floor, and construction duration per 1,000 m2 floor area. As the results, the international competitiveness of each country varied according to which measures were used to analyze them. Among the four countries, the construction labor productivity of the U.S. was the highest, followed by that of South Korea. South Korea also had the second highest productivity growth rate, following that of Japan. On the other hand, when analyzed from the perspective of construction duration, the construction productivity in South Korea appeared relatively lower than those of other countries. There were differences in the location of construction competitiveness of each country analyzed by various measures. Therefore, to accurately diagnose and improve the construction competitiveness in South Korea, strategies based on various measures are need to established simultaneously.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.426-435
• /
• 2020

To determine the damages to waxy corn caused by low temperature weather, we investigated the relationship between the temperature and duration of low temperature treatment and the changes in growth characteristics during the recovery period after the treatments in different growth periods. Growth inhibition started in the low temperature group treated at temperatures below 5℃ for three days. The inhibition ratio (IR) was more than 22% or more in all sample groups. As the treatment duration increased and the Temperature decreased, the growth was more greatly inhibited than that in the control. The IR was the highest at 27% or more in the 2nd leaf stage group treated at below 5℃ for 5 days. The IR was in the order of 2nd leaf stage > 1st leaf stage > coleoptile. The IR during recovery was the highest in the 2nd leaf stage group treated at -3℃ degree for 7 days, nd the values were 82% and 98% for NDVI and Fv/Fm, respectively. Especially, all groups treated at -3℃ showed either no changes or decreases in the growth characteristics. As a result, growth inhibition increased as the temperature decreased, and as the duration of the low temperature increased. The degree of damage was in the order of 2nd leaf stage > 1st leaf stage > coleoptile. All early seedlings stopped growing and withered when exposed to temperatures at or below -3℃ for 3 days or more.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.282-287
• /
• 2023

The effect of stress relief heat treatment temperature and duration time on the microstructure, residual stress and Vickers hardness of additively manufactured Ti-6Al-4V alloy using laser powder bed fusion process was clarified. As a result of stress relief heat treatment for 240 minutes at 823 K and 60 minutes or more at 873 K, residual stress was decreased less than 30 MPa without grain growth and phase transformation which causes dimensional distortion and deterioration of mechanical properties. In addition, hardness was increased with increasing heat treatment temperature and duration time. It was deduced that the refinement of acicular martensitic α' phase due to the increasing duration time of isothermal heat treatment at 773~873 K, which was not detected by XRD and phase map analysis using SEM-EBSD, probably increases the hardness.