• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.103-111
• /
• 2014

This study analyzed effects of packaging materials and storage temperature on the shelf-life of Korean grinded yam. For experimental measurement, experimental groups were used $PET(12{\mu}m)/Al(9{\mu}m)/LLDPE(60{\mu}m)$ as opaque barrier packaging material and $PET(12{\mu}m)/PE(20{\mu}m)/VM-PET(12{\mu}m)/PE(25{\mu}m$) and barrier $NY(15{\mu}m)/LLDPE(60{\mu}m$) as transparent barrier packaging material. Control group were used normal $NY(15{\mu}m)/LLDPE(65{\mu}m)$. The grinded yam stored at refrigeration temperature ($5^{\circ}C$) and room temperature ($20^{\circ}C$C) for 8 days. Changes in color, pH, viscosity, microorganisms and sensory characteristics were measured. In the grinded yam L and ${\Delta}E$ value were not changed rapidly at refrigeration temperature. However L and ${\Delta}E$ were rapidly changed in all of packaging materials at room temperature. In two temperature condition, pH and viscosity were decreased during storage but pH was increased at $5^{\circ}C$ after 4 days. PET/Al/LLDPE and PET/PE/VM-PET/PE inhibited the growth of microorganisms effectively. PET/AL/LLDPE which is a high barrier packaging material showed the best in two temperature condition.

• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.436-447
• /
• 2004

Wetland plants have evolved specialized adaptations to survive in the low-oxygen conditions associated with prolonged flooding. The development of internal gas space by means of aerenchyma is crucial for wetland plants to transport $O_2$ from the atmosphere into the roots and rhizome. The formation of tissue with high porosity depends on the species and environmental condition, which can control the depth of root penetration and the duration of root tolerance in the flooded sediments. The oxygen in the internal gas space of plants can be delivered from the atmosphere to the root and rhizome by both passive molecular diffusion and convective throughflow. The release of $O_2$ from the roots supplies oxygen demand for root respiration, microbial respiration, and chemical oxidation processes and stimulates aerobic decomposition of organic matter. Another essential mechanism of wetland plants is downward water movement across the root zone induced by water uptake. Natural and constructed wetlands sediments have low hydraulic conductivity due to the relatively fine particle sizes in the litter layer and, therefore, negligible water movement. Under such condition, the water uptake by wetland plants creates a water potential difference in the rhizosphere which acts as a driving force to draw water and dissolved solutes into the sediments. A large number of anatomical, morphological and physiological studies have been conducted to investigate the specialized adaptations of wetland plants that enable them to tolerate water saturated environment and to support their biochemical activities. Despite this, there is little knowledge regarding how the combined effects of wetland plants influence the biogeochemistry of wetland sediments. A further investigation of how the Presence of plants and their growth cycle affects the biogeochemistry of sediments will be of particular importance to understand the role of wetland in the ecological environment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.91-91
• /
• 2017

Drought is the most serious abiotic stress limiting rice production. However, little progress has been made in the genetic analysis of drought tolerance, because it is a complex trait controlled by a number of genes and affected by various environmental factors. In here, we screened 218 rice genetic resources for drought tolerance at vegetative stage and selected 32 highly drought tolerant varieties in greenhouse. Under rain-fed conditions, Grain yield of Nagdong was decreased by 53.3% from 517 kg/10a to 241 kg/10a when compare to irrigation condition. By comparison, grain yield of Samgang was decreased by 23.6% from 550 kg/10a to 420 kg/10a. The variety Samgang exhibited strong drought tolerance and stable yield in rain-fed conditions and was selected for further study. To identify QTLs for drought tolerance, we examined visual drought tolerance (VDT) and relative water content (RWC) using a doubled haploid (DH) population consisted of 101 lines derived from a cross between Samgang (a drought tolerance variety) and Nagdong (a drought sensitive variety). Three QTLs for VDT were located on chromosomes 2, 6, and 11, respectively, and explained 41.8% of the total phenotypic variance. qVDT2, flanked by markers RM324 and S2016, explained 8.8% of the phenotypic variance with LOD score of 3.3 and an additive effect of -0.6. qVDT6 was flanked by S6022 and S6023 and explained 12.7% of the phenotypic variance with LOD score of 5.0 and an additive effect of -0.7. qVDT11, flanked by markers RM26765 and RM287, explained 19.9% of the phenotypic variance with LOD score of 7.1 and an additive effect of -1.0. qRWC11 was the only QTL for RWC to be identified; it was in the same locus as qVDT11. qRWC11 explained 19.6% of the phenotypic variance, with a LOD score of 4.0 and an additive effect of 9.7. To determine QTL effects on drought tolerance in rain-fed paddy conditions, seven DH lines were selected according to the number of QTLs they contained. Of the drought tolerance associated QTLs, qVDT2 and qVDT6 did not affect tiller formation, but qVDT11increased tiller number. Tiller formation was most stable when qVDT2 and qVDT11 were combined. DH lines with both of these drought tolerance associated QTLs exhibited the most stable tiller formation. These results suggest that qVDT11 is important for drought tolerance and stable tiller formation under drought stress condition in field.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.115-125
• /
• 2014

With Single Comb White Leghorn (WL) and Korean Native Chicken (KNC) breeds, we compared the stress response with chicken breeds that were subjected to a high stocking density. Stress response was analyzed by the quantity of telomeric DNA, the rate of DNA damage and the expression levels of heat shock proteins (HSPs) and hydroxyl-3-methyl-glutaryl coenzyme A reductase (HMGCR) genes on tissues and blood. The telomere length and telomere shortening rates were analyzed by quantitative fluorescence in situ hybridization on the nuclei of lymphocytes and tissues. The DNA damage rate of lymphocytes was quantified by the comet assay. The expression levels of HSP70, HSP90-${\alpha}$, HSP90-${\beta}$ and HMGCR genes were measured by quantitative real-time polymerase chain reaction in lymphocytes. There was no significant difference between KNC and WL in body weight, weight gain, telomere shortening rate and DNA damage rate. However, the growth rate significantly decreased in chickens raised under high stocking density conditions, as compared to the control group. The telomere-shortening rate, DNA damage and HSPs expression of the lymphocytes were significantly higher in the high stocking density group than the control. The stress condition and breeds had a significant effect on the expressions of HSP70, HSP90-${\alpha}$ and HSP90-${\beta}$ in lymphocytes, except HMGCR. The stress response of WL was higher than that of KNC, as analyzed to the expression of HSP70 and HSP90-${\alpha}$. Therefore, we concluded that the chickens which were exposed to a high stocking density had increased the individual physiological stress response regardless of breeds, and White Leghorns are more susceptible to stress condition than Korean Native Chickens.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.920-926
• /
• 1998

To investigate the effects of yellow loess on the microbial community after applying into C. polykrikoides as a red tide centrol method during decomposition process, we conducted this study using microcosm experiments, which consisted of sediment collected from Jinhae and Masan bay. The composition, number of bacteria and respiratory electron transport system activity (ETSA) were analyzed. The number of heterotrophic bacteria examined in the samples of both stations reached maximum value within 12 hrs with $10^7$ cells/dry g, independent with the yellow loess applied. In addition, a differenee in the variation of heterotrophic bacterial composition was not observed by adding the yellow loess, and Vibrio spp. always appeared during the culture periods, However, in day 8 culture, the sulfate reducing bacteria was $3.8\times10^7$ cells/dry g in Masan bay and $5.5\times10^6$ cells/dry g in Jinhae bay samples without yellow loess, and these were 120, 350 fold-and 160, 420 fold-increased when yellow loess was added (1 : 1, 1 : 2). The average ETSA was 6.8$\~$7.6 $\mu$g formazan $h^{-1}$ dry $g^{-1}$ independently with yellow loess in aerobic condition for both samples, but activity was decreased by addition of yellow loess in anaerobic. Thus the addition of yellow loess to marine sediment seems to have an effect to inhibit the anaerobic decomposition process and growth of sulfate reducing bacteria which lead to the bad condition of marine environments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.207-215
• /
• 2019

This study was conducted to establish spring sowing techniques in preparation for the impacts of climate change on sowing time and wintering rates of winter forage crops such as barley, oat and IRG. Oat showed the highest yield in 2017 which had relatively dry climate condition. And when sowing in late Febrnary 2017 yielding 9,408kg/ha were obtained, yielding 4,011kg/ha more than IRG's sown in the same period. In 2018 which had relatively wet climate condition, four barley species decreased in the production from the previous year. Oat also had decreased by 70% from 9,408kg/ha to 2,851kg/ha. On the other hand, IRG maintained the production in the mid-5,000kg/ha range. It was also found that IRG had the least variability due to external influences regardless of seeding period for 2 years. Mixed sowing with IRG and oat in 50:50 ratio was the highest dry matter, 6,584kg/ha, and IRG was 18.5% and Oat was 2.3 times higher than single planting.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.390-399
• /
• 2014

The objective of this study was to establish a processing technology for preserved leaves based on the results from the examination of the optimal period and condition for dye-absorbing treatment for Eucalyptus cinerea F. Mull. ex Benth. (silver dollar eucalyptus) being used frequently as plant material for flower design. Cut foliages of E. cinerea with uniformly matured leaves were cut into 20 cm lengths and their lower stem parts were placed in dye solution in growth chambers with different temperatures (10, 20, 30, and $40^{\circ}C$), vapor pressure deficits (VPD; 0.23, 0.70, 1.17, and 1.61 kPa), and photoperiods (0, 6, 12, 24 hours) for 3, 6, 9, and 12 days, and then dried in a room of $20^{\circ}C$ for three days. Lower temperature during preserving dye treatment reduced the changes in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Especially, high temperature increased red degree (a) and decreased yellow degree (b) due to browning. Lower VPD reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Shorter photoperiod reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. The ${\Delta}E$ value increased with increasing absorbing duration under three environmental conditions. The flexibility of stem and leaves after dipped into preserving dye solution and dried for 3 days increased with decreasing temperature, VPD and dipping duration. Therefore, the optimal environment condition for dye treatment was 0.23-0.70 kPa VPD at $10-20^{\circ}C$ in the darkness, and the optimal and economical duration was 3 days. These conditions reduced the speed of water loss by decreasing transpiration, so yellowing or browning by rapid water loss deteriorated the quality of preserved leaves out of these ranges.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.214-219
• /
• 1991

To clarify the relationship between ambient water temperature and heading characteristics of rice (Oryza sativa L.), twelve of varieties rice were grown in a cold tolerance screening field where water temperature was controlled by continuous cold water irrigation system to test the cold tolerance of rice. When cold water was continuously irrigated with 5 cm of water depth, the water had stagnated for about three hours, and the water temperature increased gradually from inlet toward outlet in the experimental plot. The fluctuation of water temperature was well synchronized with that of ambient air temperature, and the water temperature near outlet became higher than the air temperature at the vegetative phase, while became lower at the reproductive phase of rice plant community. The leaf development rates on main culm increased by increased water temperature. The rice varities, Fukuhikari, Sangpungbyeo and YR3486-16-2 were more sensitive than the others in the response of leaf development to water temperature. However, Janack and Milyang 42 were comparatively less sensitive to water temperature in leaf development. Janack and Paro -white rices required longer days to develop one leaf on main culm at reproductive phase than at vegetative phase. Varietal difference in days required to develop one leaf on main culm of rice plant was more distinctive at the reproductive phase when water temperature was relatively lower than at the vegetative phase with relatively higher water temperature condition. No difference was found between the growth phases, vegetative and reproductive, in the response of average leaf developmental rates to water temperature under the similar air temperature condition. The estimated average days required to develop one leaf on main culm decreased by 1.3 day by 1$^{\circ}C$ increase in water temperature. Varietal differences in the total number of leaves on main culm depended upon the water temperature, in which the varieties such as Fukuhikari, Gwangmyeon-gbyeo, China 988, and YR3486-16-2 showed increased one leaf by increased water temperature, while Sobaekbyeo, Paro-white, Sangpungbyeo, Pungsanbyeo, Samgangbyeo, and Milyang 42 were kept at the same leaf number regardless of water temperature. However, the total leaf number on main culm and days to heading of Janack increased by increased water temperature. The other varieties showed the shortened days to heading by the increase in water temperature with noticeable varietal differences regardless of the variation in the total number of leaves on main culm.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.127-134
• /
• 1999

This study was performed to obtain the basic data to present rational silvicultural tending plan. It makes these widely distributed pine-oak mixed stand and each of pure stand in middle province on object of this study and do comparative analysis of light condition about stand parameter and natural regeneration according to each slope(north, west and south) conditions of location in central part of South Korea. Sample plots for pine-oak mixed stand and pine and oak pure stand were established on each of southern, northern and western slopes based upon site and growth conditions of the slope. Sample plot was a circle of 0.05ha with a diameter of 25.24 m. A sample plot has between 30 and 40 tree in it. Total 23 sample plots were established; 9 pure pine stands, 8 pine-oak mixed stands. and 6 pure oak stands across lower, middle, upper parts of slopes. Relative light intensity within a stand was' measured by crown- photo(fish-eye lens; 180$^{\circ}$) system through fish-eye lens and by comparing each plot with the denuded through PAR-sensor. The crown closure ratio of pure pine stand (75%) shows much lower than that of mixed stand (90.9%) and pure oak stand (93%). The relative light intensity within a stand showed an opposite result. The crown closure of mixed stands tended to become gradually low as the slope moves from the north to the south, but the relative light Intensity within the stand tended to rise. By analyzing the relationship between the relative light intensity within a stand and stand parameter, light intensity within a stand tended to decrease as the diameter and N/ha increase. Number of oak seedlings and light intensity within a stand is in a straight-line regression relation. In particular, the number of oak seedlings was the highest in mixed stands on the southern slope. But no single pine seedling was found. The unfavorable conditions of l0cm thick litter layer and low relative light intensity in a stand (ranging between 4% and 8%) is considered to prevent pine seeds from germinating.