• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.3
• /
• pp.162-178
• /
• 2017

Remote sensing can be used to provide information about the monitoring of crop growth condition. Recently Unmanned Aerial Vehicle (UAV) technology offers new opportunities for assessing crop growth condition using UAV imagery. The objective of this study was to assess weather UAV aerial images are suitable for the monitoring of highland Kimchi cabbage. This study was conducted using a fixed-wing UAV (Model : Ebee) with Cannon S110, IXUS/ELPH camera during farming season from 2015 to 2016 in the main production area of highland Kimchi cabbage, Anbandegi, Maebongsan, and Gwinemi. The Normalized Difference Vegetation Index (NDVI) by using UAV images was stable and suitable for monitoring of Kimchi cabbage situation. There were strong relationships between UAV NDVI and the growth parameters (the plant height and leaf width) ($R^2{\geq}0.94$). The tendency of UAV NDVI according to Kimchi cabbage growth was similar in the same area for two years (2015~2016). It means that if UAV image may be collected several years, UAV images could be used for estimation of the stage of growth and situation of Kimchi cabbage cultivation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.132-138
• /
• 2007

Carbon nanotubes (CNTs) arc grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. The structural and field-emissive properties of the CNTs grown are characterized in terms of the substrate-bias applied. Characterization using the various techniques, such as field-omission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the structural properties of the CNTs, including their physical dimensions and crystal qualities, as well as the nature of vertical growth, are strongly dependent upon the application of substrate bias during CNT growth. It is for the first time observed that the provailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negatively substrate-biasing would promote the vertical-alignment of the CNTs grown, compared to positively substrate-biasing. However, the CNTs grown under the positively-biased condition display a higher electron-emission capability than those grown under the negatively-biased condition or without any bias applied.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1423-1428
• /
• 1994

TiO2 doped sapphire single crystals were grown by Verneuil method. The doping amount of TiO2 to Al2O3 were varied 0.1, 0.2, 0.3 wt% respectively. The grown crystals have reddish color and somewhat transparent. Optimum growth condition was established by changing growth rate and gas flow ratio. Growth condition are as follows; The flow rate range of oxygen ws 5.0~7.3 ι/min and that of hydrogen was 16~25ι/min and average growth rate was 6~8mm/hr. The basic cause of color appearence and defects in crystal were studied.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.398-403
• /
• 2009

The theoretical bases on characteristics of heat release rate in compartment of building for scenario of smoke management are introduced and the numerical applications to simple compartment model are carried out. The growth stage which is important for smoke management design is modelled as t-squared fire curve including fire growth coefficient with related to growth rate. The conditions for the happening of flashover is presented such as $600^{\circ}C$ of temperature or $20kW/m^2$ of radiation heat flux. After the flashover happen, the fire in compartment changes to fully developed fire having the characteristics of ventilation-controlled fire. As the result of numerical analysis to simple compartment model, the time to reach 900K under ceiling for condition of medium growth is twice for condition of fast growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.196-199
• /
• 2005

This study was conducted to find out the effect of quality of water for wasabi growth by the relationship of quality of water and plant growth. In dissolved contents of water, water of lime area was higher than basalt area at $NO_3$, Cl, Ca, and Mg. In the change soil hardness and water temperature, basalt area was lower than lime one, during wasabi cultivation. Growth characteristics and yield were higher in basalt area than lime one. The weight of rhizome in basalt and lime was 585 kg/10a, 4183kg/10a, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.156-156
• /
• 2017

Plants are grown under constitutive changing of environmental conditions and response to external conditions at both protein and transcription level. The effects of heat on plant growth are broad and influence the yield directly. Heat stresses could be classified depend on intensity and duration. Fundamental changes of growth condition by climate change maybe or maybe not classified as a stress on plant growth. The effects of a short and unanticipated impact of elevated heat on plant could be different with those of under longer extension of ambient heat. To examine differently expressed gene sets by ambient heat stress of soybean, we grow the soybean in normal condition for three weeks. After that, soybean plants move to growth chamber. The temperature of growth chamber increase up to $9^{\circ}C$ for four days. We have extracted mRNA and micro RNA every 24 hours and carried RNA sequence analysis. We found major metabolic pathways affected by ambient heat stress. Mainly carbon metabolism, translation machinery and amino acid synthesis are affected. We discussed the expression patterns of genes of heat sensing and hormone responses.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.241-245
• /
• 1989

A carriersupported mycelial growth of Sreptomyces erythreus was applied to erythromycin fermentation sistem using celite as a support material. Hyphal growth through the pore matrices of the materials showed anchorages and provided a stable biofilm growth. When the phospate concentration was limited to 0.8g corn steep liquor/L(corresponding to 40mg KH2PO4/L), the specific production rate of erythromycin was increased from 557$\mu$g/g-cell.hr under unlimited condition to 2, 898 $\mu$g/g-cell.hr. A fluidized-bed bioreactor was operated for erythromycin production by a repeated fed-batch mode. The control of free mycelial concentration and the extension of production phase were considered important to maintain the reactor productivity at a desired level. The erythromycin production under phosphate-limited condition could be maintained for at least 600hrs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.381-381
• /
• 2011

The influence of the water vapor on the growth of single-walled carbon nanotubes (SWCNTs) was investigated. SWCNTs were synthesized by catalytic chemical vapor deposition of acetylene over Fe-Mo/MgO catalyst with injection of water vapor. The morphologies and structures of the water-assisted SWCNTs were investigated according to the growth conditions such as water vapor concentrations, flow rate of the gas, furnace temperature, and growth time. Water-assisted SWCNTs exhibited large bundle morphological features with well-alignment of each CNT, while SWCNTs synthesized in the absence of water vapor showed entangled CNT with the random orientation. We also found that the diameter of the SWCNT bundle could be controlled by the growth condition. In our optimal growth condition, the product yield and the purity were 300 wt. % and 75%, which were 7.5 and 2.5 times higher than those of SWCNTs synthesized without water vapor, respectively. More detail discussion will be offered at the poster presentation.

• ALGAE
• /
• v.28 no.2
• /
• pp.203-211
• /
• 2013

Dunaliella salina and Dunaliella bardawil are well known for carotenogenesis, the overproduction of carotenoids, under stress conditions. The effect of high light (HL) and low light (LL) on the growth, morphology, photosynthetic efficiency, and the ${\beta}$-carotene and zeaxanthin production of D. salina CCAP 19/18 and D. bardawil was investigated and compared. Both strains showed similar growth kinetics under LL growth condition, but D. salina CCAP 19/18 was faster. As the light intensity increased, D. salina CCAP 19/18 cells were elongated and D. bardawil cells became larger. Both strains showed decrease of the maximum quantum yield of PSII ($F_v/F_m$) and election transport rate (ETR) under HL growth condition and D. salina CCAP 19/18 was less liable to the light stress. Both strains had about 1.8 and 5 times difference in the $O_2$ evolution rate at LL and HL conditions, respectively. The ${\beta}$-carotene and zeaxanthin production were increased as the light intensity increased in both strains. D. bardawil was more sensitive to light intensity than D. salina CCAP 19/18. The possible application of D. salina CCAP 19/18 as a carotenogenic strain will be discussed.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.93-103
• /
• 2013

In recently, a growing concern for the health of urban residents increased interests in a variety of outdoor activities simply be done in terms of cost and time. They are specially interested in low-impact and safe exercises around residential or working area. Walking is the one of easily doing exercise in daytime or nighttime near residential area. The sidewalks of boulevard near the residential area is the best place for exercise because of easy access and the green space with roadside trees. However, if the nighttime is not guaranteed the proper lighting condition, the possibility of exposure to crime and the threat to pedestrian safety can be increased. Because roadside trees are one of the potential obstacle for lighting condition, supplementary lightings are important to mitigate interruption for safety. To meet such a need, the purpose of this study is to propose a simulation approach which improves lighting condition on sidewalks of boulevard with variety of roadside trees. To do so, the simulation approach is applied for analyzing the interrupted condition by classified five standard types of roadside trees considering the growth of them and finding optimal layout of supplementary luminaires by lighting types. The results of this approach shows that it is useful for assessing the safety of pedestrian in nighttime.