• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.141-153
• /
• 1991

The optimal choice of the tax rate and the inflation rate framework is extended to yield relevant interpretations for the optimal fiscal and monetary policy regime in Korea. To study the relationship between the government budget and monetary growth in different environments of policy coordination, two models assuming different degrees of fiscal dominance are developed. By modelling differing institutional arrangements of the fiscal and the monetary authority from an optimal government finance viewpoint, we find the optimal relationship among some important fiscal and monetary variables. By testing the existence of the relationship empirically, we find the characteristics of the optimal policy-mix regime in Korea. The first model-the strong from of fiscal dominance-studies the optimal collection of seigniorage in a period-by-period optimization with standard assumptions on the income velocity of money, deriving a general testable result: the optimal inflation/tax rate ratio co-vary with the marginal revenue ratio. The second model-the weak form of fiscal dominance-studies an implication of the inflationary bias of discretionary monetary policy in the presence of fiscal side distortions. This model shows that the tax rate and the inflation rate can have a positive correlation. Empirical tests of the theoretical results are done for the Korean economy for 1972-1989 period. The test results show that the macroeconomic policy regime in Korea can be characterized by the strong form of fiscal dominance, implying the importance of the government budget in explaining money growth and inflation.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.235-244
• /
• 2005

This study was carried out in Osan river to quantitatively investigate behavior of attacked microbial community (AMC) for enhancing self-purification process of river. We gained the results such as follows throughout long-term monitoring at in-situ river. The biomass of AMC had higher in the riffle than the almost stagnant pool and they were more developed in the riffle with high current velocity (HCV). Although the fast flowing current affects negatively to growth of the AMC during the early phase when the community gets attached to the benthic substrate, it was observed that it affected positively to their growth during the intermediate and later phase after the community is adapted to the substrate. When turbulence due to external pressure (storm or discharge of dam and reservoir) occurs, the degree of separation depends upon the flowing strength and the type of the external pressure. Since the community is not all separated, recovery is rather fast. Therefore, this study found that the degree of reduction of the pollutant by self-purification of the stream is depended upon the riverbed shape and the AMC contributes to self-purification positively or negatively in river. Therefore, the riverbed shape must be constructed in accordance with the characteristics of water quality in stream. Furthermore, the technique of installing the water channel structure appropriate for each section must be developed to maximize self-purification ability.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.583-590
• /
• 2016

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2008

The seasonal variations of water quality and periphyton were investigated in an artificial stream (the Cheonggyecheon Stream) flowing through the Seoul City. TP showed a longitudinal gradient: 10 to $59{\mu}gP\;L^{-1}$ in the upper stream sites, and 15 to $90{\mu}gP\;L^{-1}$ in downstream sites. POP was a major form of TP in the water, occupying over 60%, while the proportion of DIP was less than 10% except for St. 4. N/P atomic ratio ranged from 78 to 554, which implies phosphorus would limit algal growth more than nitrogen. The biomass of periphyton did not show much difference among sites, and it was relatively higher in spring and fall season $(10\sim20{\mu}gChl\;{\alpha}cm^{-2})$ and lower in August $(<5{\mu}gChl\;{\alpha}cm^{-2})$, possibly because biofilms were washed off during spates of summer monsoon. Cyanobacteria was the dominant taxon in the periphyton community throughout the year. The periphyton standing crop can be classified as a nuisance level. It seems that phosphorus level is sufficiently high even though the input water is treated chemically, and modest water velocity $(20\sim90cm\;sec^{-1})$ and rocky bottom provide optimal conditions for periphyton growth.

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.595-603
• /
• 2017

Crop growth and production cost are greatly influenced by management of environmental factors such as ambient temperature, humidity, and $CO_2$, especially in protected horticulture. Opening and closing of greenhouses is the most important operation for control of these ambient environmental factors, and precise and stable operation requires high performance window motors. In this study, a 400 W precise window motor was constructed, and its performance was evaluated for plastic and glass greenhouses. First, the motor was designed and fabricated by benchmarking of an advanced foreign product. Then, the performance was evaluated through vibration, PCB (Process Control Block), and load tests. Vibration tests resulted in averaged vibration displacement and velocity of the developed motor of 0.002 mm and 0.2267m/s, which were statistically significantly different from those of the target motor. Average vibration acceleration ($0.26m/s^2$) of the developed motor was also significantly different from that ($0.51m/s^2$) of the target motor. PCB tests showed 2 - 4 mm deviation from the target values, and confirmed the operating status and precision of the control. Load tests with a 300 kg load also showed acceptable operating status and durability. Current values were $1.31{\pm}0.06A$ and RPMs were in the range of 2.9 - 3.0. Considering the above results, the developed window motor would be competitive to the target foreign product.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.393-397
• /
• 2003

P. aeruginosa F722 produces biosurfactant (BS) while degrading hydrocarbons. BS production was 0.78 $g/{\ell}$ on the C-medium. However, BS production increased by 1.66 $g/{\ell}$ on the condition of 0.05% (w/v) $NH_4Cl+0.1%$ (w/v) yeast extract and 3.0% (w/v) glucose, which was proved to be advantageous to BS production. In the condition of aeration of 1.0 liter per minute (LPM), BS production was increased 20% (1.94 $g/{\ell}$)more than 1.66 $g/{\ell}$ produced when the air was not supplied. Moreover, the velocity of glucose degradation at both of log and stationary growth phases increased from 0.25 and 0.18 $h^{-1}$ to 0.33 and 0.29 $h^{-1}$ respectively when the air was supplied. Besides, BS activity was more stabilized on the condition of air supply.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1091-1096
• /
• 2012

The aerodynamic characteristics of circular cylinder in a channel are studied to make clear the flow feature by solving the Navier-Stokes equation based on the finite volume method with unstructured grids. Reviews are made on with the vorticity, velocity, dynamic pressure, residual and drag, where the Reynolds numbers are 50 and 100. The flows for $Re{\succeq}50$ shows the vortex shedding in the wake, and the result is the same as the case of moving cylinder. The ground effect of flat bottom results in the growth of vortex, being generated in the upper side of the cylinder and elongated in the rear. As the cylinder approaches to wall, for example 0.6, the cylinder plays as a role of blockage to obstruct the flow between the cylinder and wall. The drag coefficients are compared with others' results to confirm the validity of the present numerical simulation.

• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.279-284
• /
• 2011

Protected vegetable production area is greater than 26% of the total vegetable production area in Korea, and portion of protected production area is increasing for flowers and fruits. To secure stable productivity and profitability, continuous and intensive monitoring and control of protected crop production environment is critical, which is labor- and time-consuming. Failure to maintain proper environmental conditions (e.g., light, temperature, humidity) leads to significant damage to crop growth and quality, therefore farmers should visit or be present close to the production area. To overcome these problems, application of remote monitoring and control of crop production environment has been increasing. Wireless monitoring and control systems have used CDMA, internet, and smart phone communications. Levels of technology adoption are different for farmers' needs for their cropping systems. In this paper, potential of wireless remote monitoring of protected agricultural environment using CDMA SMS text messages was reported. Monitoring variables were outside weather (precipitation, wind direction and velocity, temperature, and humidity), inside ambient condition (temperature, humidity, $CO_2$ level, and light intensity), irrigation status (irrigation flow rate and pressure), and soil condition (volumetric water content and matric potential). Scenarios and data formats for environment monitoring were devised, tested, and compared. Results of this study would provide useful information for adoption of wireless remote monitoring techniques by farmers.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.122-132
• /
• 2013

In this research the development of unstructured grid discretization solution techniques is presented. The purpose is to describe such a conservative discretization scheme applied for experimental validation work. The objective of this paper is to better establish the effects of mesh generation techniques on velocity fields and particle deposition patterns to determine the optimal aerodynamic characteristics. In order to achieve the objective, the mesh surface discretization approaches used the VLA prototype manufacturing tolerance zone of the outer surface. There were 3 schemes for this discretization study implementation. They are solver validation, grid convergence study and surface tolerance study. A solver validation work was implemented for the simple 2D and 3D model to get the optimum solver for the VLA model. A grid convergence study was also conducted with a different growth factor and cell spacing, the amount of mesh can be controlled. With several amount of mesh we can get the converged amount of mesh compared to experimental data. The density around surface model can be calculated by controlling the number of element in every important and sensitive surface area of the model. The solver validation work result provided the optimum solver to employ in the VLA model analysis calculation. The convergence study approach result indicated that the aerodynamic trend characteristic was captured smooth enough compared with the experimental data. During the surface tolerance scheme, it could catch the aerodynamics data of the experiment data. The discretization studies made the validation work more efficient way to achieve the purpose of this paper.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.181-181
• /
• 2016

Hydrogenated microcrystalline silicon (${\mu}c-Si:H$) films have attracted much attention as materials of the bottom-cells in Si thin film tandem photovoltaics due to their low bandgap and excellent stability against light soaking. However, in PECVD, the source gas $SiH_4$ must be highly diluted by $H_2$, which eventually results in low deposition rate. Moreover, it is known that high-rate ${\mu}c-Si:H$ growth is usually accompanied by a large number of dangling-bond (DB) defects in the resulting films, which act as recombination centers for photoexcited carriers, leading to a deterioration in the device performance. During film deposition, Si nanoparticles generated in $SiH_4$ discharges can be incorporated into films, and such incorporation may have effects on film properties depending on the size, structure, and volume fraction of nanoparticles incorporated into films. Here we report experimental results on the effects of nonoparticles incorporation at the different substrate temperature studied using a multi-hollow discharge plasma CVD method in which such incorporation can be significantly suppressed in upstream region by setting the gas flow velocity high enough to drive nanoparticles toward the downstream region. All experiments were performed with the multi-hollow discharge plasma CVD reactor at RT, 100, and $250^{\circ}C$, respectively. The gas flow rate ratio of $SiH_4$ to $H_2$ was 0.997. The total gas pressure P was kept at 2 Torr. The discharge frequency and power were 60 MHz, 180 W, respectively. Crystallinity Xc of resulting films was evaluated using Raman spectra. The defect densities of the films were measured with electron spin resonance (ESR). The defect density of fims deposited in the downstream region (with nonoparticles) is higher defect density than that in the upstream region (without nanoparticles) at low substrate temperature of RT and $100^{\circ}C$. This result indicates that nanoparticle incorporation can change considerably their film properties depending on the substrate temperature.