• Journal of the Korean institute of surface engineering
• /
• v.50 no.1
• /
• pp.24-28
• /
• 2017

The electrodeposition of Ni-Co alloy from a sulfamate bath was investigated. The cobalt content in the Ni-Co deposits is more influenced by the temperature or stirring effect than the current density in the process parameters. As cobalt contents in the Ni-Co deposited layer increased from 0 wt.% up to 43 wt.%, hardness value of the layer rised from 400 Hv up to 700 Hv and crystal orientation (111) increased. However, (200) and crystal size significantly reduced. The tensile and yield strength also increased, while the modulus of elasticity showed the maximum value of $10.4N/mm^2$ at 29 wt.%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1101-1107
• /
• 2013

In this study, total mercury and methyl mercury in whole blood of Korean was analyzed so as to investigate the correlation between total mercury (T-Hg) and methyl mercury (Me-Hg). 4000 whole blood samples were divided in four groups, according to T-Hg concentration in percentile: group I (p25-p50), group II (p50-p75), group III (p75-p95) and group IV (p95-p100). 100 samples were randomly selected from the each group, and Me-Hg concentration was measured. T-Hg concentration in whole blood was analyzed using a Direct Mercury Analyzer-80 and obtained limit of detection (LOD) was $0.2{\mu}gL^{-1}$. Me-Hg concentration was analyzed with ethylate derivatization using headspace-gas chromatography-mass spectrometry, and obtained LOD of methyl mercury was $0.5{\mu}gL^{-1}$. The geometric means of T-Hg and Me-Hg were $6.35{\mu}gL^{-1}$ and $4.44{\mu}gL^{-1}$, respectively, and 71.91% of T-Hg was presented as Me-Hg.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.434-442
• /
• 2014

Most manufacturing enterprises create CAD data as a result of the product/part design process; however, the CAD data is being utilized only for production activities. Besides the processes directly related to manufacturing such as design and production, the CAD data is an important resource that can be used in variety of services (e.g., catalog production and production manuals) for manufacturing enterprises. This study proposes a software platform that can support a wide range of services for manufacturing companies in an efficient and productive way. The software platform was designed based on the functions identified by requirement analysis. The platform consists of four layers: data model layer to manage relevant data; library layer and common function layer to configure services; and application layer to install and run the software. Finally, this study evaluates the validity of the proposed platform architecture by applying it to the digital catalog system.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.197-201
• /
• 2020

Purpose: This study aimed to assess the quality of dental prostheses printed by digital light-processing (DLP) technology. Methods: Ten experimental models were prepared. The ten specimens that were printed by DLP technology constituted the DLP group. The ten specimens that were produced in the same model by the casting method constituted the control group. The marginal gaps of the 20 specimens produced were measured. These gaps were measured by a silicon replica technique at two abutments of the specimen. Therefore, 20 marginal gaps were measured in each group. An independent sample t-test was performed to compare the marginal gaps measured in the two groups (α=0.05). Results: According to the results of the measurement, there was a significant difference between the mean marginal gap of the control group (78.8 ㎛) and that of the DLP group (91.5 ㎛), p<0.001. Conclusion: Although the mean marginal gaps of dental fixed prostheses produced by the DLP method was higher than the mean marginal gap of those produced by the casting method, it was considered to be within the clinical threshold value suggested by some previous studies.

• IE interfaces
• /
• v.25 no.2
• /
• pp.276-282
• /
• 2012

Earned value management(EVM) based progress management was designed to systematically manage large or huge projects with budget based criteria. For this reason, existed methods of EVM based progress management have a practical difficulty to apply to small and medium enterprises(SMEs) not possessing enough human resource, time, and cost. In other words, SMEs have performed simultaneously many small-sized projects emphasizing more project delivery than project budget. This study focuses on the area of project management applying to many small-sized projects simultaneously conducted by SMEs. Thus, the method proposed in this study is to manage only the progress of projects after removing cost factor in order to reduce man powers required for allocating the budget of projects to their all activities in detail in the stage of project planning. This study reveals that SMEs are able to manage progress of many projects easily and intuitively using the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1895-1898
• /
• 2017

This paper discusses methods for the torque ripple and noise reduction of DC motors for automotive air-conditioning based on electromagnetic field analysis. The target of the motor is a blower motor, and to reduce cogging torque and the torque ripple, the optimum model was selected by deforming the brush or commutator shape. In addition, to reduce the cogging torque, the model design was carried out by applying the skew method and the magnetization method of a magnet to the rotor. For optimization, the shape, material, and drive system of the motor were selected using an electromagnetic field as the analysis tool, and the method of reducing the cogging torque was applied to 4-pole, 12- and 13-slot motors considering the mechanical part. Lastly, this paper confirmed thatthemethod, which proposed how much noise, cogging torque, and vibration are reduced, improves through practical analysis.

• Mycobiology
• /
• v.49 no.5
• /
• pp.439-453
• /
• 2021

During the rainy season in Thailand, specimens of Phallus chiangmaiensis sp. nov. and P. merulinus were collected from Chiang Mai and Samut Sakhon Provinces, respectively. Molecular phylogenetic analyses based on sequences of the nuclear ribosomal large subunit (LSU), nuclear ribosomal 5.8S gene including the internal transcribed spacer regions 1 and 2 (ITS), and the protein-coding gene atp6 (mitochondrial adenosine triphosphate [ATP] synthase subunit 6) support the placement of the new species within Phallus. Phallus chiangmaiensis has a well-developed white indusium and campanulated caps with reticulate surfaces. It differs morphologically from the related species, as supported by the phylogenetic data. Phallus merulinus is reported here as a species that was re-encountered in Thailand. The descriptions of the species are accompanied by illustrations of macro- and micro- morphological features, and a discussion of the related taxa is presented.

• Natural Product Sciences
• /
• v.27 no.3
• /
• pp.172-175
• /
• 2021

Sesbagrandiflorain F (1), a novel 2-arylbenzofuran, and two more 2-arylbenzofurans (2-3), were isolated from the stem bark of Sesbania grandiflora L. Based on information HRESIMS data, 1D, and 2D NMR spectra, the structure of 1 was fully assigned. Compounds 1-3 were tested for cytotoxicity in MCF-7 and HeLa cells. Compounds 1 and 3 showed moderate activity against MCF-7 cells with an IC₅₀ value of 2.68 and 4.08 ㎍/mL, respectively. Conversely, all of the isolates were inactive towards HeLa cells.

• Natural Product Sciences
• /
• v.25 no.3
• /
• pp.244-247
• /
• 2019

A new isoprenylated stilbene, flavestinK (1) together with two known isoprenylated stilbenes, flavestin B (2), flavestin G (3), and two isoprenilated flavanones, 4-O-methyl-8-isoprenylnaringenin (4) and 8-isoprenyl-5,7-dihydroxyflavanone (5) were isolated from the leaves of Macaranga recurvata Gage. All of the structures have been determined based on HRESIMS, 1D and 2D NMR spectral data. All of the isolated compounds were evaluated for their cytotoxicity against three human cancer cells (HeLa, T47D and WiDr). Compound 1 showed higher activity than doxorubicin against HeLa cells with $IC_{50}$ value of $13.1{\mu}g/mL$.

• Membrane and Water Treatment
• /
• v.13 no.5
• /
• pp.227-233
• /
• 2022

The objective of the study, to develop adsorbent based purifier for removal of radiological and nuclear contaminants from contaminated water. In this regard, 3-aminopropyl silica functionalized with ethylenediamine tetraacetic acid (APS-EDTA) adsorbent prepared and characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). Prepared APS-EDTA used for adsorptive studies of Cs(I), Co(II), Sr(II), Ni(II) and Cd(II) from contaminated water. The effect on adsorption of various parameters viz. contact time, initial concentration of metal ions and pH were also analyzed. The batch method has been employed using metal ions in solution from 1000-10000 ㎍/L, contact time 5-60 min., pH 4-10 and material quantities 50-200 mg at room temperature. The obtained adsorption data were used for drawing Freundlich and Langmuir isotherms model and both models were found suitable for explaining the metal ions adsorption on APS-EDTA. The adsorption data were followed pseudo second order reaction kinetics. The maximum adsorption capacity obtained 1.3037-1.4974 mg/g for above said metal ions. The results show that APS-EDTA have great potential to remove Cd(II), Co(II), Cs(I), Ni(II) and Sr(II) from aqueous solutions through chemisorption and physio-sorption.