• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.317-322
• /
• 2010

In this study, poly(methyl methacrylate) (PMMA) was treated with changing mixing ratios of $F_2$ and $O_2$ using oxyfluorination method for hydrophilic modification of PMMA film. For the characterizations of oxyfluorinated PMMA surface, contact angle, surface free energy, X-ray photoelectron spectroscopy (XPS) and optical transmittance (UV-vis) were carried out. After the oxyfluorination, PMMA surface became more hydrophilic showing the decrease of water contact angle from $69^{\circ}$ to $44^{\circ}$. So, surface free energy of oxyfluorinated PMMA film was increased from 46 to $58\;mN\;m^{-1}$. These results are attributed to hydrophilic functional groups such as hydroxyl group formed oxyfluorination method on the PMMA surface. From XPS results, it was confirmed that O/C concentration ratio on the surface of PMMA was increased, the amount of C-OH bonding which shows hydrophilicity was also largely increased from 6.7 to 24.8% with increasing fluorine partial-pressure via the oxyfluorination, The oxyfluorination conditions, room temperature, 1 bar with one mixture ratio of $F_2$ to $O_2$ had little influence on optical transmittance properties of PMMA film but enhanced its surface hydrophilicity. This result suggests that oxyfluorination method could be useful to change hydrophobic PMMA surface to hydrophilic.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.329-337
• /
• 2015

In this study, multi-walled carbon nanotubes (MWCNTs) were oxidized with a mixture of nitric acid and sulfuric acid. After oxidation, oxidized MWCNTs were treated with thionyl chloride ($SOCl_2$) and 1,4-butanediol (BD) in sequence at room temperature to introduce hydroxyl groups on the surface of MWCNTs. The prepared MWCNT-OH was silanized with 3-methacryloxypropyltrimethoxylsilane (MPTMS) to make MWCNT-MPTMS. The MWCNT-MPTMS was used as fillers in emulsion polymerization to make MWCNT-MPTMS/PMMA composite particles with 3 kinds of emulsifiers, hexadecyltrimethylammoniumbromide (CTAB) as a cationic, sodium dodecylbenzene sulfonate (SDBS) as an anionic and polyethylene glycol tert-octylphenyl ether (Triton X-114) as a nonionic emulsifier. Morphologies of composite emulsions were confirmed by a particle size analyzer (PSA) and a scanning electron microscope (SEM). Morphologies of emulsion polymerized MWCNT-MPTMS/PMMA with SDBS showed more uniform particle size distribution compared to those of other two emulsifiers used emulsions. MWCNT-MPTMS/PMMA showed $3.4^{\circ}C$ higher $T_g$ compared to pristine MWCNT/PMMA due to covalent bond formation at interface of MWCNT-MPTMS and PMMA.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.57-82
• /
• 1994

This paper is the result of the researches and the field surveys of the villages and the dwellings of Korean immigrants in Yien-Pien area, north-eastern China. This study aims to persue both of the origin and the process of development of their settlements and dwelling types from late 19C to the present. Their processes are too complex to analysis by single view-point. I have eyes to interprete them from three pionts; 1)correspondences between the dwelling types and the econo-political history of their region, 2)cultural assimilation with the native dwelling types, and 3)the direction of their modernization with the economical development of modern China. Three village types have been pioneered; 1)the villages of indivisual immigration, 2)the villages of planned group immigration, and 3)the villages of socilistic reform villages of 1) were composed of organic village patterns and various shaped dwelling lots on the sloped site; villages both of 2) and 3), gird patterns and uniformed lots on open fields. Historically, villages of 1) were pioneered before 1931; villages of 2), 1936-1945; villages of 3), from 1945. Each of dwelling types had strong relations with the village types to which it belonged. Before 1931, dwellings were built up based on so called "Ham-buk dwelling type" which was dominent in north-eastern Korea. In the era of gruop-immigration, various dwelling types were flew into Yen-Pien from southern Korea. In modern China, their southern types were changed into Yen-Pien type as similar as Ham-book type. After 1945, with the Great leap Forward and the Cultural Revolution, as communization of indivisual properties and reorganization of rural communities, each of dwellings became smaller and simpler in aspects of scales as well as functions. There are two types in Yen-Pien dwellings, those are 'single-file' and 'double-file' type. Three sub-types of latter arc 'six-bays', 'eight-bays', and rarely 'ten-bays'. The most common element of all types is Chong-ju-k'an; which is large room with heated floor, openig to kitchen. Now, modern dwellings of Korean immigrants are changing their spatial compositions, materials, and structures. With cultural assimilation as well as modernization, especially in urban areas, they are compelled to accept the elements of Chinese dwellings. But the spatial element of "Chong-ju-k'an", which is the core element of Yen-Pien dwelling type, never fade away nor is changed.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.943-947
• /
• 2016

The objective of this study was to see if fairly simple magnetic nano-particle treatment enhances boar semen qualities. Boar semen samples were prepared from the swine AI center and samples were divided by 4 different motility groups (1, >90%; 2. 80~90%; 3. 70~80%; 4. <70%) using computer assisted sperm analysis (CASA) evaluation. Boar semen was extended using BTS extender and same number of magnetic nano-particles as total number of spermatozoa in each sample was treated for 20 min and collected for 5 min at room temperature. Sperm qualities such as motility and viability were evaluated by the CASA before and after treatment. Sperm abnormality and degree of agglutination were also evaluated under the microscopic examination before and after treatment. There were significant changes (p<0.05) on sperm motility from all 4 different groups in the average of 7.11% after treatment. The enhancement of sperm motility changes was more clear in the groups of lower sperm motile groups (<70% and 70~80%; 19.12±1.08% and 5.67±0.71%, p<0.05). The sperm motility character in terms of curvilinear velocity (VCL), straight line velocity (VSL), average path velocity (VAP) and linearity (LIN, %) showed also similar pattern but motility enhancement wear more clear in below 70% motile group. Average sperm viability was increased to 4% by magnetic nano-particles (p<0.05). The percentage of sperm abnormality was also reduced significantly (p<0.05) to the range of 3.7~4.5% before after treatment. The degree of sperm agglutination was also reduced in lower motility groups by the magnetic nano-particle purification.

• Archives of design research
• /
• v.17 no.3
• /
• pp.431-440
• /
• 2004

Environment has formed characters of one society and the society has formed its characteristic cultural behaviors. Oppositely cultural behaviors make the characteristic products like environment and space products. It gives the idea that we can create cultural space by examining cultural characteristics. This research bases on the 5 cultural dimensions of Geert Hofstede to inspect cultural quality of Korea and the 10 cultural factors of Edward. T. Hall in order not to omit some part of cultural characters. From April 2004, KTX which is originated from TGV of France began toroll in Korea. It is interesting that the same interior of train is used by two different cultures. The method to find out the special quality of transportation culture of Korea passed 5 steps like following; 1) making a questionnaire to understand general concepts 2) observation to make dear what are the special behaviors in the interior of train 3) comparison valuation with marking sheet of the interiors of KTX and HSR in order to find out which space Korean people prefer 4) comparison of behaviors in the interior of KTX and TGV 5) Interviewing and surveying the opinions of passengers of KTX. With these methods it would be possible to seek out the characters, preferencesand needs for the interior space of train. There were remarkable things like following 1) importance of privacy from the other's eyes 2) seriousness of individual seat because of the short term transportation 3) necessity of continuous information because of 'Uncertainty Avoidance Culture' 4) absence of moving 5) requirement of bright and comfortable interior like one's inner room 6) preference to take a seat as a group with their friends or family due to 'Collective Culture' 7) self-defense and self-protection of one's baggage because of 'Uncertainty Avoidance Culture'. With these discoveries this research suggests guidelines to design interior of train of Korea.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.397-405
• /
• 2009

This study compared the effect of an activator, intermediate bonding resin and low-viscosity flowable resin on the microtensile bond strength of a self-curing composite resin used with two-step total etching adhesives. Twenty extracted permanent molars were used. The teeth were assigned randomly to nine groups (n=10) according to the adhesive system and application of additional methods (activator, intermediate adhesive, flowable resin). The bonding agents and additional applications of each group were applied to the dentin surfaces. Self-curing composite resin buildups were made for each tooth to form a core, 5mm in height. The restored teeth were then stored in distilled water at room temperature for 24h before sectioning. The microtensile bond strength of all specimens was examined. The data was analyzed statistically by one-way ANOVA and a Scheffe's test. The application of an intermediate bonding resin (Optibond FL adhesive) and low-viscosity flowable resin (Tetric N-flow) produced higher bond strength than that with the activator in all groups. Regardless of the method selected, Optibond solo plus produced the lowest ${\mu}TBS$ to dentin. The failure modes of the tested dentin bonding agents were mostly adhesive failure but there were some cases showed cohesive failure in the resin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.596-608
• /
• 2017

In 2002, the government arranged an institutional strategy to make it possible for a consumers to make a claim for damages caused by product defects against a business that produces and sells a product by enforcing the Product Liability Law(hereinafter referred to as 'PL'). On the other hand, due to the recent humidifier sterilizer accident, approximately 12 cases of related bills, such as a revised bill for the product liability law, have been proposed to the National Assembly at present in an effort to introduce the group action system and punitive compensation system for the purpose of the strengthening of the corporate product liability, and consumer damage relief. Ironically, as much as 62.6% of small & medium businesses, which are actual interested parties to this bill, are unaware of this. Many companies are responding to PL with the rationalization of document preparation & storage, clarification of responsibility relations with related business operators, and PL insurance policy purchase, or securing compensation funds as a means of Product Liability Defense(PLD), but the methods of preparation such as this leave much room for limits on the considerations of product design and product safety. This paper presents the individual management system model with more focus on product safety by looking into the clear concept of PL and the countermeasures against it, grasping the relevance between the PL system and individual management system, and integrating the PL response system in preparation for the PL. It is hoped that the result of this research objective will be evaluated as a rational countermeasure for small & medium businesses to respond effectively to the PL.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.205-211
• /
• 2019

Over the past several decades, the polymer dispersed liquid crystal (PDLC) has received particular attention as a material for developing smart window due to their electro-optical switchable properties. In this study, PDLC cells were fabricated using acrylate monomers, namely 2-hydroxyethyl acrylate (2-HEA) and ethylene glycol phenyl ether acrylate (EGPA), and the effect of the monomer composition on their electro-optical properties was investigated. The monomer mixture with a low viscosity (~10 cps) was easily filled between indium tin oxide (ITO) glasses by capillary action at room temperature. PDLC cells prepared using the mixture ratio of 1 : 9 (2-HEA : EGPA) did not show a complete opaque state at a 0 V condition but exhibited unstable electro-optical properties under an electric field. As the LC composition increased in the reaction mixture for PDLC cell preparation, the $V_{th}$ (threshold voltage) and $V_{sat}$ (saturation voltage) values as well as contrast ratio (CR) increased. $V_{th}$ and $V_{sat}$ values also increased with the cell gap thickness. PDLC cells with a $20{\mu}m$ cell gap thickness exhibited higher CR than those with 10 and $40{\mu}m$ cell gap thicknesses. Particularly, PDLC cells prepared using the mixture ratio of 7 : 3 (2-HEA : EGPA) showed excellent electro-optical properties such as a low driving voltage and high contrast ratio.

• Nuclear Engineering and Technology
• /
• v.8 no.4
• /
• pp.231-242
• /
• 1976

The effects of temperature and pressure of leaching water on the leaching of radionuclides from bitumen-waste products were studied. The principal results are as follows: The fraction of $^{90}$ Sr and $^{137}$ Cs leached for periods of up to 120 days at 8atm was 2.1$\times$10$^{-6}$ ($\textrm{cm}^2$/g)$^{-1}$ , day$^{-1}$ and 6.02$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively and at 5$^{\circ}C$, 1.7$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ and 4.01$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively. These values were lower than those in atmospheric pressure and room temperature. No diffence in the leaching rate with sea and distilled water was observed for the bitumen-waste products containing 40wt% salts. It appears that these results could be saved by improving safety in the dumping of sea. The effect of the softening point of pure asphalt or bitumen-waste product by $^{60}$ Co irradiation was increased with increasing total dose. Irradiation of asphalts at a total dose of 5.8$\times$10$^{8}$ rad showed no evidence of volume and caused no swelling. The functional groups of blown asphalt by infrared spectra are also identified.