• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.212-219
• /
• 2012

This study focus on what methods of MOT are needed and utilized to solve a technical problem in the MOT leading company. We first classified the MOT methods by project life cycle and R&D job quality based on the several discussion with working group. In order to study, the survey was carried out by 168 experts working on MOT practices. Our main research findings are as follows. The level of utilized MOT methods was above average because MOT sector was beginning to represent an increasing share of total R&D business. But the satisfaction level on the MOT majors was below average. The more utilized MOT methods in practices were 'environment analysis and opportunity research,' 'business feasibility,' 'roadmapping,' 'portfolio,' 'technology tree,' 'scheduling,' 'risk management,' 'six sigma,' 'design of experiment,' 'quality control,' 'cost analysis' etc. And the subjects of product realization process were also needed to MOT practice such as 'design for reliability,' 'design for cost,' 'design for performance,' 'design for safety' deeply involved to product quality. Finally, the capability requested to University students were 'problem define and solving,' 'technology planning and strategy,' 'creative thinking.'

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2015

With the recent popularity of smart terminals, the demand for high-data-rate transmission is growing rapidly, which brings a new challenge for the traditional cellular networks. Both device-to-device (D2D) communication and small cells are effective to improve the transmission efficiency of local communication. In this paper, we apply D2D communication into a small cell network system (SNets) and study about the optimization problem of resource allocation for D2D communication. The optimization problem includes system scheduling and resource allocation, which is exponentially complex and the optimal solution is infeasible to achieve. Therefore, in this paper, the optimization problem is decomposed into several smaller problems and a hierarchical scheme is proposed to obtain the solution. The proposed hierarchical scheme consists of three steps: D2D communication groups formation, the estimation of sub-channels needed by each D2D communication group and specific resource allocation. From numerical simulation results, we find that the proposed resource allocation scheme is effective in improving the spectral efficiency and reducing the outage probability of D2D communication.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.2
• /
• pp.39-60
• /
• 1995

In this paper, an integration of stochastic dynamic programming (SDP), integer goal programming (IGP) and analytic hierarchy process (AHP) is proposed to handle multiobjective-multicriteria sequential decision making problems under uncertainty inherent in R & D investment planning. SDP has its capability to handle problems which are sequential and stochastic. In the SDP model, the probabilities of the funding levels in any time period are generated using a subjective model which employs functional relationships among interrelated parameters, scenarios of future budget availability and subjective inputs elicited from a group of decision makers. The SDP model primarily yields an optimal investment planning policy considering the possibility that actual funding received may be less than anticipated one and thus the projects being selected under the anticipated budget would be interrupted. IGP is used to handle the multiobjective issues such as tradoff between economic benefit and technology accumulation level. Other managerial concerns related to the determination of the optimal project portifolio within each stage of the SDP model. including project selection, project scheduling and annual budget allocation are also determined by the IGP. AHP is proposed for generating scenario-based transformation probabilities under budgetary uncertainty and for quantifying the environmental risk to be considered.

• Journal of Families and Better Life
• /
• v.21 no.2
• /
• pp.117-130
• /
• 2003

This study was conducted to examine elderly users' satisfaction with welfare services and the environments of the senior citizen centers in mid-sized and small cities in Korea. Three hundred and two elderly users were surveyed for this study. Age and gender differences in the level of satisfaction were found. The male elderly users and older users were more satisfied with the education programs than the female and younger users. The elderly people who reside in single-family residences were more satisfied with the educational programs and part-time job opportunities offered at the center than the elderly users who were living in apartment buildings. This could be explained by the fact that dwellers of single housing had more freedom and more room for self-regulation in scheduling their program participation, whereas the apartment building residents had rarely experienced social exchanges with their neighbors. There were significant differences in satisfaction with the environments of the centers by gender, marital status, age, level of education, religion, and housing type. The group differences were explained by the abundance of community activities that are centered around younger and female participants. Based on these findings, it is suggested that more specialized educational and social programs should be developed for the younger users in their early 60s, that co-ed religious activities and hobby programs should be expanded, and that the home-visiting welfare staff should regularly provide the elderly users the information on programs and activities.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.77-80
• /
• 2017

In this paper, we proposed a way to improve performance of GP-GPU by deletion of superscalar issue from its original form. At first, we simplified the structure of stream processor in order to eliminate superscalar issue. Under this condition, preservation of hardware size and increasing of thread number were followed by functional improvement of GP-GPU. As the number of thread was getting larger, we proposed the new model of warp scheduler which adjusts the group of thread. This superscalar issue-deleted warp scheduler transferred the instructions to warp which was activated by Round Robin Scheduling. Performance comparison was conducted by Gaussian filtering and the results indicated that our newly designed GP-GPU showing 7.89 times better in its performance than original one.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1874-1885
• /
• 2018

The customer side operation is getting more complex in a smart grid environment because of the adoption of renewable resources. In performing energy management planning or scheduling, it is essential to forecast non-controllable resources accurately and robustly. The PV system is one of the common renewable energy resources in customer side. Its output depends on weather and physical characteristics of the PV system. Thus, weather information is essential to predict the amount of PV system output. However, weather forecast usually does not include enough solar irradiation information. In this study, a PV system power output prediction model (PPM) under limited weather information is proposed. In the proposed model, meteorological radiation model (MRM) is used to improve cloud cover radiation model (CRM) to consider the seasonal effect of the target region. The results of the proposed model are compared to the result of the conventional CRM prediction method on the PV generation obtained from a field test site. With the PPM, root mean square error (RMSE), and mean absolute error (MAE) are improved by 23.43% and 33.76%, respectively, compared to CRM for all days; while in clear days, they are improved by 53.36% and 62.90%, respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.233-239
• /
• 1999

With the increase of Internet protocol (IP) packets the performance of routers became an important issue in internetworking. In this paper we examined the matching algorithm in gigabit router which has input queue with virtual output queueing. Port partitioning concept is employed to reduce the computational burden of the scheduler within a switch. The input and output ports are divided into two groups such that the matching algorithm is implemented within each input-output pair group in parallel. The matching is performed by exchanging input and output port groups at every time slot to handle all incoming traffics. Two algorithms, maximal weight matching by port partitioning (MPP) and modified maximal weight matching by port partitioning (MMPP) are presented. MMPP has the lowest delay for every packet arrival rate. The buffer size on a port is approximately 20-60 packets depending on the packet arrival rates. The throughput is illustrated to be linear to the packet arrival rate, which can be achieved under highly efficient matching algorithm.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.608-615
• /
• 2022

Construction projects are large-scale projects that require extensive construction costs and resources. Especially, scheduling is considered as one of the essential issues for project success. However, the schedule and resource management are challenging to conduct in high-tech construction projects including complex design of MEP and architectural finishing which has to be constructed within a limited workspace and duration. In order to deal with such a problem, this study suggests resource and sequence optimization using constraint programming in construction projects. The optimization model consists of two modules. The first module is the data structure of the schedule model, which consists of parameters for optimization such as labor, task, workspace, and the work interference rate. The second module is the optimization module, which is for optimizing resources and sequences based on Constraint Programming (CP) methodology. For model validation, actual data of plumbing works were collected from a construction project using a five-minute rate (FMR) method. By comparing actual data and optimized results, this study shows the possibility of reducing the duration of plumbing works in construction projects. This study shows decreased overall project duration by eliminating work interference by optimizing resources and sequences within limited workspaces.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.82-86
• /
• 2015

Construction delay is a common problem worldwide, which is considered as one of the main reasons for project failure. Bangladesh construction industry is no exception. This study investigated the main causes of delay in large building construction projects in Bangladesh. A questionnaire survey was conducted to determine the causes of delay from owners, consultants, and contractors of large building construction projects. About 70 respondents participated in the survey. Using the importance index analysis, the study identified 10 most important causes of delay from a list of 30 different causes. Ten most important causes were: (1) lack of experienced construction manager, (2) lowest bidder selection, (3) funding shortage by owner, (4) lack of proper management, (5) improper planning and scheduling, (6) lack of skilled workers, (7) site constraints, (8) contractors' cash flow problems during construction, (9) escalation of resources price, and (10) contractors' excessive workload. Furthermore, Kruskal-Wallis test indicates that there is no significant variation exists among the three group of respondents, ie owners, consultants and contractors.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.11-16
• /
• 2004

Recently, collaborative works are increased more and more over the distributed heterogeneous computing environments. The availability of high-speed wide-area networks has also enabled collaborative multimedia applications such as video conferencing, distributed interactive simulation and collaborative visualization. Distributed high performance computing and collaborative multimedia applications, it is extremely important to efficiently perform group communication over a heterogeneous network. Typical group communication patterns are broadcast and Multicast. Heuristic algorithms such as FEF, ECEF, look-ahead make up the message transmission tree for the broadcast and multicast over the distributed heterogeneous systems. But, there are some shortcomings because these select the optimal solution at each step, it may not be reached to the global optimum In this paper, we propose a new heuristic algerian that constructs tree for efficiently collective communication over the previous heterogeneous communication model which has heterogenity in both node and network. The previous heuristic algorithms my result in a locally optimal solution, so we present more reasonable and available criterion for choosing edge. Through the performance evaluation over the various communication cost, improved heuristic algorithm we proposed have less completion time than previous algorithms have, especially less time complexity than look-ahead approach.