• Journal of Chest Surgery
• /
• v.44 no.3
• /
• pp.197-207
• /
• 2011

Background: In cardiac surgery, especially in the reconstruction of vascular structures and intracardiac defects, glutaraldehyde has usually been used as the reagent for fixing porcine or bovine pericardial tissues. But the well-known problem of calcification or cytotoxicity of glutaraldehyde motivates the search for a replacement. The aim of this study is to investigate the physical, mechanical, and biochemical characteristics of bovine pericardial tissues fixed with genipin, which is known to be a less toxic and more natural fixing reagent. Materials and Methods: Bovine pericardial tissues were fixed with different concentrations and conditions of glutaraldehyde and genipin. To determine the physical, mechanical, and biochemical differences among different concentrations and conditions, we divided the tissue into 18 groups by concentration, the addition of organic solvents, and the timing of adding the organic solvents, and compared the characteristics of each group. Results: Tensile strength, physical activity, and thermal stability tests revealed that the tissues fixed with glutaraldehyde were better with regard to mechanical strength and biochemical durability. However, the difference was not significant statistically. Conclusion: Genipin can be used as an alternative crosslinking agent for pericardial tissue, considering given its physical, mechanical, biochemical characteristics and low cytotoxicity comparable to glutaraldehyde. However, further studies are needed on the immune reaction and the long term changes in genipin-fixed tissues in the human body.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.71-71
• /
• 2012

As the critical dimensions of integrated circuits are scaled down, the line width and spacing between the metal interconnects are made smaller. The dielectric film used as insulation between the metal lines contributes to the resistance-capacitance (RC) time constant that governs the device speed. If the RC time delay, cross talk and lowering the power dissipation are to be reduced, the intermetal dielectric (IMD) films should have a low dielectric constant. The introduction of Cu and low-k dielectrics has incrementally improved the situation as compared to the conventional $Al/SiO_2$ technology by reducing both the resistivity and the capacitance between interconnects. Some of the potential candidate materials to be used as an ILD are organic and inorganic precursors such as hydrogensilsequioxane (HSQ), silsesquioxane (SSQ), methylsilsisequioxane (MSQ) and carbon doped silicon oxide (SiOCH), It has been shown that organic functional groups can dramatically decrease dielectric constant by increasing the free volume of films. Recently, various inorganic precursors have been used to prepare the SiOCH films. The k value of the material depends on the number of $CH_3$ groups built into the structure since they lower both polarity and density of the material by steric hindrance, which the replacement of Si-O bonds with Si-$CH_3$ (methyl group) bonds causes bulk porosity due to the formation of nano-sized voids within the silicon oxide matrix. In this talk, we will be introduce some properties of SiOC(-H) thin films deposited with the dimethyldimethoxysilane (DMDMS: $C_4H_{12}O_2Si$) and oxygen as precursors by using plasma-enhanced chemical vapor deposition with and without ultraviolet (UV) irradiation.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.375-382
• /
• 2020

Rock drop obstacles on major roads in the border area in South Korea has been installed and operated to prevent and block the movement of enemy units. However, the increase in traffic volume due to the development of the border region causes many problems such as road traffic congestion due to rock drop, traffic safety, and impaired urban aesthetics. Therefore, this study aimed to provide guidelines for demolition and replacement facility installation for rock drop obstacles, which are differently applied to each unit, and to suggest the direction of the Ministry of National Defense's policy regarding maintenance cost for necessary rock drop obstacles required for operation. In this study, as part of a guideline study on the removal of rock drop obstacles and the installation of alternative facilities, a standard unit price was suggested for essential rock drop obstacles, so as to be used as judgment data when deciding whether to remove rock drop obstacles.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.279-286
• /
• 2009

Streptomyces is well known for their ability to synthesize enormous varieties of antibiotics as secondary metabolites. Among them, S. avermitilis produces avermectins, a group of antiparasitic agents used in human and veterinary medicine. However, S. avermitilis also produces oligomycin, which is a potential toxic inhibitor of oxidative phosphorylation in mammalian cells. Therefore, we decided to disrupt oligomycin synthetase gene to prevent co-production of oligomycin in S. avermitilis. To create plasmid for disruption, the smallest gene of oligomycin synthetase gene cluster was obtained by PCR from S. avermitilis chromosome. Then, apramycin resistance gene was inserted in oligomycin synthetase gene for selection. After transformation of this plasmid, oligomycin synthetase gene (olmA5) in the chromosome was displaced with disruption cassette on the plasmid via homologous recombination. As a result of this gene replacement, we obtained mutants (olmA5::apra) that no longer makes the toxic oligomycin. And the mutants confirmed by PCR and HPLC analysis. However, showed no increasement of avermectin production in the mutant was observed.

• Korean Journal of Veterinary Research
• /
• v.53 no.2
• /
• pp.95-101
• /
• 2013

The study was carried out to evaluate and compare the immune responses in mice experimentally infected with either wild-type or isogenic mutants of Salmonella enterica serovars Enteritidis (SE), Salmonella Typhimurium (ST) and Gallinarum (SG). The mutant strains were constructed by allelic replacement of some virulence-associated genes in the wild-type strains. Seven-week-old female BALB/c mice were orally or intraperitoneally inoculated by injecting bacterial suspension. To evaluate the immune responses, enzyme-linked immunosorbent assay (ELISA) and enzyme-linked immunospot (ELISPOT) assay were conducted with serum and fecal samples. As a result, the mice group infected orally with the SE mutant strain showed the highest level of specific IgA-secreting splenocytes, compared to the other groups. The peritoneally injected groups showed the greater levels of IgG1 than the orally injected groups, which was in a good agreement with the previous studies. In addition, the mutant infected groups had the similar secretion levels of antibodies with the wild-type infected groups. These results demonstrated that the SE mutant strain elicited humoral immune response as much as wild-type, implying that it can be useful as a delivery vehicle as well as a candidate of a live attenuated vaccine.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.342-349
• /
• 2017

Polylactic acid (PLA) has been highlighted as an alternative renewable polymer for the replacement of petroleum-based plastic materials, and is considered to be biodegradable. On the other hand, the biodegradation of PLA by terminal degraders, such as microorganisms, requires a lengthy period in the natural environment, and its mechanism is not completely understood. PLA biodegradation studies have been conducted using mainly undefined mixed cultures, but only a few bacterial strains have been isolated and examined. For further characterization of PLA biodegradation, in this study, the PLA-degrading bacteria from digester sludge were isolated and identified using a polymer film-based screening method. The enrichment of sludge on PLA granules was conducted with the serial transference of a subculture into fresh media for 40 days, and the attached biofilm was inoculated on a PLA film on an agar plate. 3D optical microscopy showed that the isolates physically degraded the PLA film due to bacterial degradation. 16S rRNA gene sequencing identified the microbial colonies to be Pseudomonas sp. MYK1 and Bacillus sp. MYK2. The two isolates exhibited significantly higher specific gas production rates from PLA biodegradation compared with that of the initial sludge inoculum.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.151-164
• /
• 2007

Objective: The sinus floor elevation procedures have been used to facilitate implant placement in the severely atrophic posterior maxilla. Many variables may have an influence on the outcomes of the sinus floor elevation in combination with implant treatment. The aim of this study was to analyze survival rate of implants placed in the edentulous maxillae of patients in whom sinus floor elevation was undertaken according to variables. Materials and Methods: It consisted of 96 patients(50 male and 46 female), ranging in age from 31 to 70 years(mean 49 years), who underwent sinus floor elevation procedure(94 implants in left side and 106 implants in right side) from 2001 to 2002. A total of 200 implants were placed in the grafted sinus(73 implants in lateral approach and 127 implants in crestal approach). All implants were restored by fixed prosthesis. All patients were healthy. Follow-up periods for implants were between 48 to 60 months. Results: The cumulative survival rate of implants was 91.5%. Gender, age and operation site did not have an influence on the survival rate. There was statistically significant differences for the implants which placed in less than 4 or 5 rom residual bone height, the survival rate was 60%, 81.4% respectively (p<0.05). There was no statistically significant difference of implants survival rate ac- cording to approach technique. The survival rate for 100% autogenous bone grafts was lower with respect to composite grafts containing autogenous bone and 100% substitutes. The survival rate for hydroxyapatite-coated implants was statistically significant lower than other textured group (p<0.05). Conclusion: Residual bone height, surface texture and graft materials have an influence on the survival rate. To use autogenous bone as a part of a composite bone replacement, implant texture which leads to more favorable implant-bone interface were necessary. To determine residual bone height for initial implant stability was important.

• Korean Journal of Poultry Science
• /
• v.43 no.2
• /
• pp.97-103
• /
• 2016

This study aimed of effects of replacing maize with rice or brown rice on laying performance, egg quality, and apparent fecal digestibility of nutrient in Hy-Line Brown laying hens. A total of 200, 25-week old Hy-Line Brown laying hens were randomly assigned to one of 5 treatments, each of which was replicated 4 times. Four experimental diets that were formulated two different grains (brown rice or rice) with two inclusion levels of (15 and 30%) as a replacement of maize. The experimental period was 8 weeks. During the experiment, hens were provided with feed and water ad libitum and were exposed to a 16:8=L:D lighting schedule. There were no differences in feed intake, egg weight, and egg mass during the 8 weeks of the feeding trial among groups. However, hen-day egg production was greater (P<0.05) for Brown rice treatment groups than that for basal and rice treatment groups. In addition, the supplementation of brown rice or rice did not have an effect on eggshell strength, eggshell thickness, and HU during of the feeding trial (Table 4). However, egg yolk color was less (P<0.05) for basal treatment groups than that for among treatment group. ATTD of dry matter (DM) and crude fat were greater (P<0.05) for brown rice 15 treatment than for rice 30 treatment. Crude protein (CP) was greater (P<0.05) for brown rice 15 treatment than for basal treatment. In conclusion, brown rice or rice grains is a good alternative energy feedstuff and can be used in laying hens, totally replacing maize, without any negative effect on the laying performance, egg quality, and nutrient digestibility.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.104-111
• /
• 1998

The InGaAs/InP quantum wells(QWs) were grown by low pressure metalorganic chemical vapor deposition and the effects of growth interruption steps on their interfacial structures were investigated by measuring photoluminescence spectra. When InP or InGaAs surface was treated under the same group V ambient, the full width at half maximum (FWHM) of the QW peak increased possibly due to the incorporation of impurities during the growth interruption time. When InP surface was treated under $AsH_3$, howerer, the PL peak showed red-shift due to the As-P exchange reaction and the change of FWHM was not remarkable. The effective thickness of InAs interfacial layer formed during $AsH_3$, treatment on the InP surface was calculated to be 1~2 monolayers. In the case of InGaAs treatment under $PH_3$, the PL peak energy and the FWHM increasied. This results suggest that $PH_3$ treatment on the InGaAs surface suppresses the incorporation of As into the subsequent InP layer and the local replacement of As by P occurs simultaneously.