• 전기의세계
• /
• 제29권4호
• /
• pp.256-259
• /
• 1980

A singular pertubation theory is applied to obtain an approximate solution for suboptimal control of nuclear reactors with spatially distributed parameters. The inverse of the neutron velocity is regarded as a small perturbing parameter, and the model, adopted for simplicity, is a cylindrically symmetrical reactor whose dynamics are described by the one group diffusion equation with one delayed neutron group. The Helmholtz mode expansion is used for the application of the optimal theory for lumped parameter systems to the spatially distributed parameter systems. An asymptotic expansion of the feedback gain matrix is obtained with construction of the boundary layer correction up to the first order.

• 한국터널지하공간학회 논문집
• /
• 제21권3호
• /
• pp.347-362
• /
• 2019

도심지 터널 공사가 많아지면서 이에 따른 소음, 진동, 교통불편 및 민원 저감을 위해 TBM 굴착이 증가하고 있다. 그러나 이러한 추세에도 불구하고 국내 TBM 공동구 설계 및 시공을 위한 기준들은 대부분 해외기술(일본, 독일 등)을 이용하고 있어 국내환경을 고려하지 못하고 있다. 특히, 공동구 TBM 설계의 주요 기준이 되는 굴진율은 대부분 일축압축강도만으로 산정되며 이마저도 실제 현장 특성과 맞지 않아 개선이 필요하다. 본 연구에서는 국내 현장에 적합한 굴진율을 예측하기 위해 수행되었다. 이를 위해 시공 중인 소단면 쉴드 TBM 굴착 현장의 지반 및 굴진데이터를 수집하고 상관관계 분석을 통해 굴진율에 영향을 미치는 주요인자를 파악하였다. 도출된 영향인자들은 통계적 분석기법을 기반으로 한 다중선형 회귀분석에 적용되어 굴진율을 예측하는 회귀식의 예측변수로 이용되었다. 결과적으로 회귀분석을 통해 도출된 회귀식은 일축압축강도와 절리간격을 예측변수로 추정되었으며, 해외 경험식과 비교하여 국내현장 굴진율의 예측 정확도가 높은 것으로 나타났다. 다만, 이 회귀식을 타 국내 현장에 적용할 경우 예측오차가 다소 증가하였다. 회귀식이 갖는 이와 같은 적용 한계를 개선하기 위해서는 추가적인 연구를 통해 현장조건에 제약을 받지 않는 굴진율 예측모델 도출이 필요할 것으로 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.225-226
• /
• 2003

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.291-296
• /
• 2008

지난 20년간 3D/4D CAD에 관한 연구는 시설물 생애주기의 설계, 시공단계를 중심으로 활발히 진행되어 왔지만 시설물 생애주기 전반에 걸쳐서 3D/4D CAD의 유용성에 관한 연구는 아직까지 미흡한 실정이다. 본 연구에서는 설계, 시공단계에 국한하지 않고 시설물 생애주기 동안의 3D/4D CAD 사용에 따른 유용성을 도출하기 위하여 현재 상용화된 소프트웨어를 사용하여 3D/4D CAD 모델을 생성하였다. 생성된 모델과 기존의 시설물 생애주기 관리 방법을 기반으로 전문가와 포커스 그룹 인터뷰를 실시하여 그 결과를 바탕으로 155명의 시설물 생애주기 관련 업무 수행자들의 설문조사를 통해 3D/4D CAD를 통한 시설물 생애주기 관리 유용성을 도출하였다.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.44-53
• /
• 2021

As environmental issues have emerged worldwide, emission gas regulations have been strengthened. In the construction machinery sector, studies have been actively conducted to utilize the power source of electric motors owing to the increasing demand for zero emissions. In this study, the gear specifications of an electric axle for construction machinery were selected by considering the specifications of the motor, gear tooth contact pattern, and face load factor. The gear strength evaluation was performed at the system level using the simulation model. The bending and contact strength of the spiral bevel gears and the bending strength of the planetary gear set showed a safety factor of 1 or more. However, the contact strength of the planetary gear set showed a safety factor of 0.92. Conservative results were derived by performing the analysis under the rated load condition of the motor. However, the ratio of the equivalent torque to the rated torque of the motor was 45% or less, hence, it was determined that no difficulties should arise regarding the durability of the axle.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.

• 한국건설관리학회논문집
• /
• 제14권5호
• /
• pp.122-130
• /
• 2013

CM시장에서의 경쟁이 심화되고 있는 상황에서 CM기업이 경쟁우위를 점하는 것은 매우 중요한 기업 현안이다. 이를 위해서는 적합한 경쟁전략을 갖추어야 하고 이를 통해 지속적으로 경쟁우위를 확보할 필요가 있다. 본 연구의 목적은 CM시장에서 경쟁우위를 점하기 위해 CM기업들이 중요하게 여기는 경쟁전략요소를 분석하고 이들 경쟁전략요소에서 나타나는 주요 특징과 시사점을 도출하는데 있으며 마이클 포터(Michael Porter)의 경쟁전략모델을 분석방법론으로 활용하였다. 연구 결과, 상위그룹에서는 차별화전략을 중요시 여기는 반면, 하위그룹에서는 집중화전략을 중요시 여기는 것으로 나타났다. 그러나 원가우위전략은 상하위 그룹에서 동일하게 상대적으로 중요도가 낮은 경쟁전략으로 인식되고 있는 것으로 나타났다. 비록 상하위 그룹에 따라 각 경쟁전략요소의 세부적인 순위에는 차이가 있었지만 종합적으로 보면 특화된 CM서비스 제공이 중요한 경쟁전략요소로 인식되고 있었다. CM기업의 경쟁전략요소에 대한 이해는 현재 CM기업들이 중요하게 생각하는 경쟁전략의 방향성과 내용을 파악할 수 있게 하며 향후 자사(自社)의 경쟁전략 수립을 위해 유용하게 활용될 수 있다.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.435-449
• /
• 2023

Time domain method and frequency domain method are commonly used in the current fatigue life calculation theory. The time domain method has complicated procedures and needs a large amount of calculation, while the frequency domain method has poor applicability to different materials and different spectrum, and improper selection of spectrum model will lead to large errors. Considering that artificial neural network has strong ability of nonlinear mapping and generalization, this paper applied this technique to random fatigue life prediction, and the effect of average stress was taken into account, thereby achieving more accurate prediction result of random fatigue life.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.387-395
• /
• 2011

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.183-196
• /
• 2022

Reduced beam section (RBS) moment connections used in special moment resisting frames are currently limited to beam sections that are not larger than nominal depths of 920 mm, weight of 447 kg/m and flange thickness of 44 mm. Due to the higher demand for structural components with jumbo sections, which can potentially be applied in the transfer girders in long-span building structures, the newly available steel heavy members are promising. To address this issue, advanced numerical models are developed to fully evaluate the distribution of stresses and concentrations of plastic strains for such jumbo RBS connections. This paper first presents a brief overview of an experimental study on four specimens with large beam and column sections. Then, a numerical model that includes initial imperfections, residual stresses, geometric nonlinearity, and explicitly modeled welds is presented. The model is used to further explore the behavior of the test specimens, including distribution of stresses, distribution of plastic strains, stress triaxiality and potential for fracture. The results reveal that the stresses are highly non-uniform across the beam flange and, similarly, the plastic strains concentrate at the extreme fiber of the bottom flange. However, neither of these phenomena, which are primarily a function of beam flange thickness, is reflected in current design procedures.