• 펄프종이기술
• /
• 제43권2호
• /
• pp.31-39
• /
• 2011

The applicability of arrowroots as materials for paper manufacture was investigated by evaluating the characteristics of arrowroots pulping and pulps, and the surface characteristics of paper made of arrowroots. The results is as follows. The yield of grounded pulp, alkaline pulp, grounded bleach pulp, and alkaline bleach pulp are 98.0%, 37.7%, 84.8%, and 32.5%, respectively. The extraction components in arrowroot's fibers was shown high in 1%-NaOH extraction. The amount of holocellulose and lignin were largely decreased, but a slight decrease was shown in the bleaching processes. Many shivers were shown in the grounded fibers. The amount of shivers was decreased and the single fibers were increased during the process of bleaching. The alkaline pulp and the alkaline bleach pulp showed high in the beating time and freeness than the grounded pulp and grounded bleach pulp. The conditions of sheet surface according to beating time is effected largely by the conditions of original pulp.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.211-217
• /
• 2016

Most nuclear power plants now utilize solid grounded low voltage systems. For safety and reliability reasons, the low voltage (LV) high resistance grounding (HRG) system is also increasingly used in the pulp and paper, petroleum and chemical, and semiconductor industries. Fault detection is easiest and fastest with a solidly grounded system. However, a solidly grounded system has many limitations such as severe fault damage, poor reliability on essential circuits, and electrical noise caused by the high magnitude of ground fault currents. This paper will briefly address the strengths and weaknesses of LV grounding systems. An example of a low voltage HRG system in the LV system of a nuclear power plant will be presented. The HRG system is highly recommended for LV systems of nuclear power plants if sufficient considerations are provided to prevent nuisance tripping of ground fault relays and to avoid the deterioration of system reliability.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.40-46
• /
• 1998

This study was aimed to investigate any improvement of dewatering and energy saving on the papermaking process when the various types of fillers were used, i.e., clay, talc and grounded calcium carbonate (GCC). Cationic polyelectrolyte and alum coagulants neutralized the surface charge of the filler particles and the filler particles were coagulated. The rates of dewatering and drying were investigated. The results indicated that clay tended to intense anion, while talc and GCC tended to anion trend nearly to neutrality. Clay and talc added with EPI-DMA, P-DADMAC and alum respectively as optimum levels showed a significant efficiency on the dewatering and the turbidity dissipation. However, the turbidity and dewatering rate of GCC decreased, when GCC was added with EPI-DMA and P-DADMAC respectively Drying rate of clay was increased when coagulant added. However drying rates of talc and GCC were not affected by coagulant, while the apprarent drying time of talc and GCC in the absence of any coagulant was shorter than the clay in the presence of a coagulant. The result confirmed that talc or GCC was more efficient than clay on the dewatering and drying, which is consistent with a general knowledge in the collodal science.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.76-80
• /
• 2015

In filler loaded paper, the size of the filler affects its strength, optical and surface properties. As the size of the filler increases, tensile strength and bulk usually increases, opacity decreases, and smoothness becomes worse. Pre-flocculation of GCC (grounded calcium carbonate) makes large diameter flocs at aqueous medium that consists of multiple GCC particles, but they collapse to 2-dimensional shape in dried paper and makes low bulk paper. The hybrid calcium carbonate (HCC) that was made by in-situ $CaCO_3$ formation between GCC in aqueous medium made high bulk paper without harming tensile strength, bulk, opacity, and smoothness. The GCC that has equivalent size as HCC failed to make high opacity and smoothness as much as HCC.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.1-9
• /
• 2013

For the manufacture of linerboard with 100% KOCC, we tried to increase the solid content of wet web by employing GCC (grounded calcium carbonate) in the fiber furnish to save drying energy. Three different diameters of GCC, namely, 5, 10, and $35{\mu}m$, were used. To complement the strength loss by the addition of GCC, cationic starch and refining treatment were tried. It was found that the addition of $10-35{\mu}m$ dia. GCC to KOCC for $180g/m^2$ basis weight sheets increased the solid content of the furnish about 1-1.5% with better bulk and drainage properties. The loss of strength properties were compensated by the application of cationic starch and/or refining process to the KOCC furnish. The dia. of GCC of $35{\mu}m$ was, however, too large to make smooth surface of the sample sheet. So, the optimization process was required before implementing the results to the mill by selecting proper diameter and shape of the calcium carbonate.

• 한국토양비료학회지
• /
• 제42권4호
• /
• pp.239-248
• /
• 2009

본 실험은 지하수에 포함된 중금속을 제거하기 위한 투수성반응벽체를 개발하기 위하여 대공극 형성물질로 분쇄한 폐지와 식물섬유를 그리고 구조형성소재로 Na와 Ca-벤토나이트를 사용하여 소성 후 소성된 소재의 표면 구조와 공극발달 특성을 조사하였다. 그러나 소성은 중금속 제거율을 급격히 감소시키는 양이온교환용량에 영향을 미치므로 2:1 점토광물 중에서 양이온교환용량이 큰 점토광물과 일반 산업물질을 소재를 선정하였다. 연구 결과는 살펴보면 소성온도가 증가함에 따라 소성에 사용된 소재의 기존 CEC의 10 % 이하로 급격히 감소되는 경향을 보여주었다. 일축 압축 시험 결과 처리간 용적밀도는 큰 차이가 없었지만 Na와 Ca-벤토나이트를 소성소재 모두 폐지가 5 % 정도 처리하였을 때 압축강도가 가장 높은 것으로 나타났다. 그리고 소성온도와 기간 모두 공극 형성에 영향을 미친 것으로 조사되었다. 이러한 연구 결과로부터 다공체 내에 형성된 공극은 수분 투수 특성과 중금속 제거에 모두 영향을 미칠 것이라 추정하였다.