Abstract
In this investigation, we observed surface morphology and porosity of a macroporous adsorbent made of Na-bentonite and Ca-bentonite as structure formation materials and grounded waste paper as macropore forming material for the development of a permeable reactive barrier to remove heavy metals in groundwater. Therefore, we selected minerals having higher cation exchange capacity among 2:1 clay minerals and other industrial minerals because sintering can significantly influence cation exchange capacity, resulting in drastic decrease in removal of heavy metals. The results showed that the increasing sintering temperature drastically decreased CEC by less than 10 % of the indigenous CEC carried by the selected minerals. One axial compressibility test results showed that the highest value was obtained from 5% newspaper waste pulp for both structure formation materials of Na-bentonite and Ca-bentonite although there were not much difference in bulk density among treatments. The pore formation influenced by sintering temperature and period contributes removal of heavy metals passing through the sintered macroporous media having different water retention capacity.
본 실험은 지하수에 포함된 중금속을 제거하기 위한 투수성반응벽체를 개발하기 위하여 대공극 형성물질로 분쇄한 폐지와 식물섬유를 그리고 구조형성소재로 Na와 Ca-벤토나이트를 사용하여 소성 후 소성된 소재의 표면 구조와 공극발달 특성을 조사하였다. 그러나 소성은 중금속 제거율을 급격히 감소시키는 양이온교환용량에 영향을 미치므로 2:1 점토광물 중에서 양이온교환용량이 큰 점토광물과 일반 산업물질을 소재를 선정하였다. 연구 결과는 살펴보면 소성온도가 증가함에 따라 소성에 사용된 소재의 기존 CEC의 10 % 이하로 급격히 감소되는 경향을 보여주었다. 일축 압축 시험 결과 처리간 용적밀도는 큰 차이가 없었지만 Na와 Ca-벤토나이트를 소성소재 모두 폐지가 5 % 정도 처리하였을 때 압축강도가 가장 높은 것으로 나타났다. 그리고 소성온도와 기간 모두 공극 형성에 영향을 미친 것으로 조사되었다. 이러한 연구 결과로부터 다공체 내에 형성된 공극은 수분 투수 특성과 중금속 제거에 모두 영향을 미칠 것이라 추정하였다.