• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.83-86
• /
• 2005

This paper presents a method for point-based 3D building reconstruction using LiDAR data and digital map. The proposed method consists of three processes: extraction of building roof points, identification of roof types, and 3D building reconstruction. After extracting points inside the polygon of building, the ground surface, wall and tree points among the extracted points are removed through the filtering process. The filtered points are then fitted into the flat plane using ODR(Orthogonal Distance Regression). If the fitting error is within the predefined threshold, the surface is classified as a flat roof. Otherwise, the surface is fitted and classified into a gable or arch roof through RMSE analysis. Based on the roof types identified in automated fashion, the 3D building reconstruction is performed. Experimental results showed that the proposed method classified successfully three different types of roof and that the fusion of LiDAR data and digital map could be a feasible method of modelling 3D building reconstruction.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.15-22
• /
• 2019

본 논문에서는 무인항공기의 자율 비행을 위한 전역 및 지역 경로 비행 시스템을 제안한다. 전체적인 시스템은 ROS 로봇 운영체제를 기반으로 구축하였다. 무인항공기에 탑재된 임베디드 컴퓨터는 2-D Lidar를 이용하여 장애물을 검출하고, 실시간으로 VFH 기반의 지역 경로와 제안하는 Modified $RRT^*$-Smart 기반의 전역 경로를 생성한다. 또한, 무인항공기의 비행컨트롤러에 Mavros 통신 프로토콜을 이용하여 생성된 경로에 따른 이동 명령을 내린다. 지상국 컴퓨터는 장애물 정보를 수신하여 2-D SLAM 지도를 생성하고, 목적 지점을 임베디드 컴퓨터에 전달하며 무인항공기의 상태를 관장한다. 제안하는 무인항공기의 자율 비행 시스템을 3-D 공간 상의 시뮬레이터 및 실제 비행을 통해 검증하였다.

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.661-670
• /
• 2012

Urban forests provide great ecosystem services to population in metropolitan areas even though they occupy little green space in a huge gray landscape. Unfortunately, urbanization inherently results in threatening the green infrastructure, and the recent urbanization trends drew great attention of scientists and policy makers on how to preserve or restore green infrastructure in metropolitan area. For this reason, mapping the spatial distribution of the green infrastructure is important in urban environments since the resulting map helps us identify hot green spots and set up long term plan on how to preserve or restore green infrastructure in urban environments. As a preliminary step for mapping green infrastructure utilizing multi-source remote sensing data in urban environments, the objective of this study is to map vegetation volume by fusing LiDAR and multispectral data in urban environments. Multispectral imageries are used to identify the two dimensional distribution of green infrastructure, while LiDAR data are utilized to characterize the vertical structure of the identified green structure. Vegetation volume was calculated over the metropolitan Chicago city area, and the vegetation volume was summarized over 16 NLCD classes. The experimental results indicated that vegetation volume varies greatly even in the same land cover class, and traditional land cover map based above ground biomass estimation approach may introduce bias in the estimation results.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.313-330
• /
• 2021

카메라와 라이다가 탑재된 자율주행 시스템에서 깊이완성기술을 통해 조밀한 깊이추정을 할 수 있다. 특히, 자기지도학습을 이용하면 깊이정답이 없는 주행데이터로도 깊이완성 네트워크의 학습이 가능하다. 실제 자율주행환경에서 이러한 깊이완성의 출력은 다른 알고리즘들의 입력으로 사용되므로 매우 빠른 지연속도를 요구한다. 그래서 본 논문에서는 종래의 연구들처럼 네트워크를 고도화하여 정확도를 높이기보단 추론속도를 극대화한 형태의 깊이완성 네트워크를 사용한다. GPU 연산에 최적화된 RegNet 인코더를 사용하고 네트워크의 병렬성을 고려한 U-Net 형태의 네트워크를 설계한다. 대신, 본 논문에서는 자기지도학습 과정에서 정확도를 높일 수 있는 몇 가지 기법들을 제시한다. 제시하는 기법들은 신뢰할 수 없는 라이다 입력에 대한 강인함을 높이고 사전에 추출한 시맨틱 정보를 바탕으로 에지와 하늘 영역에 대한 깊이 추정 품질을 향상시킨다. 실험을 통해 우리의 모델은 매우 경량임에도 (2.42ms at 1280x480) 노이즈에 강하며 최신 연구들과 대등한 정확도를 보임을 확인한다.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.669-678
• /
• 2023

Recently, spatial information has been applied to various fields and its usability is increasing day by day. In particular, in the field of civil engineering and construction, BIM based on spatial information is being applied to all construction industries and related research has been conducted. BIM is a technology that utilizes spatial information from the design phase and aids in the construction and maintenance of buildings, including the management of their attributes. However, to apply BIM technology to existing buildings, it takes a lot of time and money to produce models based on design drawings along with current surveying. In this study, quantitative and qualitative analysis was conducted to determine the applicability of the acquired data and the applicability of BIM by generating data and analyzing the accuracy using UAV images and ground lidar, which are representative spatial information acquisition methods. Quantitative analysis revealed that TLS (Terrestrial Laser Scanner) showed reliable accuracy in both planar and elevation measurements, whereas unmanned aerial images exhibited lower accuracy in elevation measurements, resulting in reduced reliability. Qualitative analysis indicated that neither TLS nor unmanned aerial images alone provided perfect completeness. However, the combination of both spatial information sources, tailored to specific needs, resulted in the most comprehensive completeness. Therefore, it is concluded that the appropriate utilization of spatial information acquired through unmanned aerial images and TLS holds the potential for application in the fields of BIM and reverse engineering.

• 한국멀티미디어학회논문지
• /
• 제19권9호
• /
• pp.1647-1658
• /
• 2016

RGB+D database has been widely used in object recognition, object tracking, robot control, to name a few. While rapid advance of active depth sensing technologies allows for the widespread of indoor RGB+D databases, there are only few outdoor RGB+D databases largely due to an inherent limitation of active depth cameras. In this paper, we propose a novel method used to build outdoor RGB+D databases. Instead of using active depth cameras such as Kinect or LIDAR, we acquire a pair of stereo image using high-resolution stereo camera and then obtain a depth map by applying stereo matching algorithm. To deal with estimation errors that inevitably exist in the depth map obtained from stereo matching methods, we develop an approach that estimates confidence of depth maps based on unsupervised learning. Unlike existing confidence estimation approaches, we explicitly consider a spatial correlation that may exist in the confidence map. Specifically, we focus on refining confidence feature with the assumption that the confidence feature and resultant confidence map are smoothly-varying in spatial domain and are highly correlated to each other. Experimental result shows that the proposed method outperforms existing confidence measure based approaches in various benchmark dataset.

• 대기
• /
• 제19권4호
• /
• pp.319-329
• /
• 2009

The intensive dust observation experiment has been performed at Korea Global Atmosphere Watch Center (KGAW) in Anmyeon, Korea during each spring season from 2007 to 2009. Downward and upward hyper-spectral spectrums over the dust condition were measured to understand the hyper-spectral properties of Asian dust using both ground-based Fourier Transform Infrared Spectroscopy (FT-IR) and space-borne AIRS/Aqua. To understand the impact of the Asian dust, a Line-by-Line radiative transfer model runs to calculate the high resolution infrared spectrum over the wave number range of $500-500cm^{-1}$. Furthermore, the radiosonde, a $PM_{10}$ Sampler, a Micro Pulse Lidar (MPL), and an Aerodynamic Particle Sizer (APS) are used to understand the vertical profile of temperature and humidity and the properties of Asian dust like concentration, altitude of dust layer, and size distribution. In this study, we found the Asian dust distributed from surface up to 3-4 km and volume concentration is increased at the size range between 2 and $8{\mu}m$ The observed dust spectrums are larger than the calculated clear sky spectrums by 15~60K for downward and lower by around 2~6K for upward in the wave number range of $800-1200cm^{-1}$. For the characteristics of the spectrum during the Asian dust, the downward spectrum is revealed a positive slope for $800-1000cm^{-1}$ region and negative slope over $1100-1200cm^{-1}$ region. In the upward spectrum, slopes are opposed to the downward one. It is inferred that the difference between measured and calculated spectrum is mostly due to the contribution of emission and/or absorption of the dust particles by the aerosol amount, size distribution, altitude, and composition.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.205-210
• /
• 2006

With the development of recent technology such as telematics, LBS, and ubiquitous, the applications of 3D GIS are rapidly increased. As 3D GIS is mainly based on urban models consisting of the realistic digital models of the objects existing in an urban area, demands for urban models and its continuous update is expected to be drastically increased. The purpose of this study is thus to propose more efficient and precise methods to construct urban models with its experimental verification. Applying the proposed methods, the terrain and sophisticated building models are constructed for the area of $270,600m^2$ with 23 buildings in the University of Seoul. For the terrain models, airborne imagery and LIDAR data is used, while the ground imagery is mainly used for the building models. It is found that the generated models reflect the correct geometry of the buildings and terrain surface. The textures of building surfaces, generated automatically using the projective transformation however, are not well-constructed because of being blotted out and shaded by objects such as trees, near buildings, and other obstacles. Consequently, the algorithms on the texture extraction should be improved to construct more realistic 3D models. Furthermore, the inside of buildings should be modeled for various potential applications in the future.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.545-554
• /
• 2019

본 연구에서는 기존의 연구들에서 주로 사용하여왔던 현장측량, 항공사진, 라이다 데이터 등의 취득이 원천적으로 어려운 지역에 대한 건물 영역 추출을 구현하고자 하였다. 이에 접근성에 큰 영향을 받지 않는 거의 유일한 데이터인 고해상도 위성영상을 활용한 방법론을 제시하고자 한다. 영상정합을 통해 추출되는 점군 데이터 또는 DSM(Digital Surface Models)을 활용한 건물 영역 추출은 데이터내의 높은 잡음과 다수의 빈 영역으로 인해 그 정확성에 한계를 보이고 있다. 따라서 본 연구에서는 영상 정합을 통해 얻어진 3차원 점군 데이터, 영상의 색상 및 선형 정보를 결합하여 건물 영역 추출을 수행하는 하이브리드식 접근법을 제안하였다. 일차적으로 다중영상정합으로 얻어진 3차원 점군 데이터로부터 지면점과 비지면점을 분리하고, 비지면점으로부터 초기 건물 대상지를 추출한다. 이후, 영상의 색상기반 분할을 수행하여 얻어진 결과와 초기 건물 대상지를 결합하여, 색상분할기반 건물 대상지를 추출한다. 이어서 영상의 선형 추출 및 공간 분할정보를 이용하여 최종적인 건물 영역을 선정하게 된다. 본 논문에서 제시한 건물 영역 자동 추출 방법론은 Correctness: 98.44%, Completeness: 95.05%, 위치오차: 1.05m 정도의 성능을 보임을 확인하였으며, 더불어 직각형태 이상의 복잡한 건물 영역도 잘 추출함을 확인하였다.

• 대기
• /
• 제18권4호
• /
• pp.267-277
• /
• 2008

The occurrence and strength of the Asian Dust over the Korea Peninsular have been increased by the expansion of the desert area. For the continuous monitoring of the Asian Dust event, the geostationary satellites provide useful information by detecting the outbreak of the event as well as the long-range transportation of dust. The Infrared Optical Depth Index (IODI) derived from the MTSAT-1R data, indicating a quantitative index of the dust intensity, has been produced in real-time at Korea Meteorological Administration (KMA) since spring of 2007 for the forecast of Asian dust. The data processing algorithm for IODI consists of mainly two steps. The first step is to detect dust area by using brightness temperature difference between two thermal window channels which are influenced with different extinction coefficients by dust. Here we use dynamic threshold values based on the change of surface temperature. In the second step, the IODI is calculated using the ratio between current IR1 brightness temperature and the maximum brightness temperature of the last 10 days which we assume the clear sky. Validation with AOD retrieved from MODIS shows a good agreement over the ocean. Comparison of IODI with the ground based PM10 observation network in Korea shows distinct characteristics depending on the altitude of dust layer estimated from the Lidar data. In the case that the altitude of dust layer is relatively high, the intensity of IODI is larger than that of PM10. On the other hand, when the altitude of dust layer is lower, IODI seems to be relatively small comparing with PM10 measurement.