• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.173-178
• /
• 1995

The aim of this study was to describe the NO$_3$ leaching in grassland ecosy-stems. Field study was performed in the southwestern district of Germany from 1991 to 1993. The study included 3 different slurry application, conventional slurry application, 50% reduced slurry application and without slurry application. On each plot were installed 3 ceramic cups at 120cm depth. Samples were collected twice a month and analysed for NO$_3$ colorimetrically using a Tecator Auto-Analyzer. Percolation was calculated as the difference between precipitation and potential evapotranspiration. The NO$_3$ concentration in soil water was remarkably variable during the year. The average NO$_3$ concentration during the experiment was the lowest (8.5mg/l) without slurry application and the highest with 240kg N/ha cattle slurry (25.3mg/l). the NO$_3$-N leached per year were respectively 29, 23, and 12kg/ha in case of 240, 120 and 0kg N/ha when cattle slurry was applied. The conventional feeding density of cattle husbandry in the district caused the NO$_3$ contamination in ground water. When the amount of cattle slurry applied was reduced to 50%, the NO$_3$ loading in ground water was reduced greatly. Therefore, the reduction policy of cattle slurry can positively contribute to the prevention of the NO$_3$-contamination in groundwater.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.117-126
• /
• 2012

This study was conducted to assess the levels of microbiological hazards of preprocessed Namuls, which were served at the school foodservice. 19 preprocessed ground or root vegetables were collected from 21 schools in May to June of 2011. Heavy contamination of aerobic plate counts (from 3.39 to 8.42 logCFU/g) and total coliform groups (from 3.16 to 7.84 logCFU/g), enterobacteriaceaes (from 2.53 to 7.55 logCFU/g) were detected in preprocessed Namuls. In addition, the detection rates of Escherichia coli, Staphylococcus aureus and Bacillus cereus (emetic form) were 4.3%, 11.7% and 2.1%, respectively. In addition, sanitary indicative bacterium at preprocessing steps of root vegetables (lotus root, burdock root, bellflower root) and blanched Namuls (bracken, sweet potato vine, chinamul) were analyzed. Aerobic plate counts, coliform groups, and enterobacteriaceaes were not effectively removed during preprocessing including washing and soaking steps. In the case of blanched Namuls (bracken, sweet potato vine, chinamul), contamination levels increased more after drying process and no significant reduction effect on the levels of microbial contamination was observed during preprocessing steps. Thus, effect of preprocessing steps on the microbiological hazards in Namuls must be reevaluated to improve the microbiological quality of preprocessed Namuls at the school foodservice and retail markets.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.299-309
• /
• 2003

In an accidental release of radioactive materials to the environment the contaminative influence of animal products due to the inhalation of air and the ingestion of soil of livestock, both of which are dealt with as minor contaminative pathways in most radioecological models but may not be neglected, was investigated with the improvement of the Korean dynamic food chain model DYNACON Although mathematical models for both contaminative pathways have been established for considering all animal products and incorporated into the model, investigation was limited to milk. As a result, it was found that both pathways are influential in the contamination of milk in the case of an accidental release during the non-grazing period of dairy cows. In the case of an accidental release during the non-grazing period, the inhalation of air was more influential than the ingestion of soil in the early days following an accidental release. While, it was the opposite with the lapse of time. If precipitation is encountered during an accidental release, contaminative influence due to the ingestion of soil was greater compared with the cases of no precipitation, in general, because of a stealer deposition of radionuclides onto the ground. Precipitation during an accidental release was a less influential factor in $^{131}I$ (elemental iodine) contamination compared with the $^{137}Cs\;and\;^{90}Sr$ contaminations. In the case of an accidental release during the grazing period of dairy cows, the contaminative influence due to the inhalation of air was negligible.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3420-3429
• /
• 1974

This study was performed to estimate the daily water consumption for watering livestock and home use, and to organize the water systems in the rural districts of Korea. For these purposes, 560 farms and other 40 urban families were randomly chosen and investigated about their water systems and daily water consumption seasonally from July 20 to August 31, 1973, and other 82 livestock raisers' useful data for watering livestock helped the study to assess the consumption of livestock water and compare it to that of general farms which bred some domestic animals as their sidelines. The results of data showed that the daily consumption of water was varied with the difference of districts and seasons in which the investigations were conducted. The results were summarized as follows. 1. The mean consumption of water for home use was varied with the range of 30.2-48.7 lit./day in summer and 22.4-45.2 lit./day per a person, respectively, in the rural districts, which showed that the water consumption in summer was more than in autumn. 2. The mean consumption of livestock water in the general farms approached to about 15.8-37.1 lit./day per cattle, 3.87-16.45 lit./day per a pig, and 0.19-1.03 lit./day per chicken, but it was slightly reduced in autumn; 10.89-37.09 lit./day per cattle, 3.87-12.63 lit./day per a pig, and 0.06-0.94 lit./day per chicken. The ratio of livestock water consumption to home use amounted to the range of 10-25%. 3. The mean consumption of livestock water used at the livestock raisers amounted to 134 lit./day per dairy cow, 67.4 lit./day per cattle, 43.29 lit./day per a horse, 13.24 lit./day per a pig, 0.438 lit./day per a layer, and 0.177 lit./day per a broiler, which showed that the daily water consumption for larger livestock was about two times as much as the farms, but it was approximately of the same for small ones. 4. The factors affecting the amount of water consumption for home use were statistically analyzed to find the kind of water sources and the class of water systems by the factorial arrangement method to the fundamental experimental unit, Suwon area of 100 of families, in which the former was very significant while the latter was significant. However, the standard of living and their interactions were not significant. 5. Almost 83.24% of the sampled farms used some kinds of wells as their water sources, of which 32.06% was of hard water, and of which 11.l% or 2.6% contained much of iron or organice materials, respectively, examining them by a simple technique of sensibility, 6. The resulting chart of the farm water systems was summarized as Fig. IV-6. Observating the safe distance from contamination sources, the ratio of 42.4% of sampled farms whose water sources were wells, confronted highly to the danger of contamination to their water sources. And other dangerous sources of contamination such as toilets, stalls, and compost heaps were situated nearly to the water sources, and most of them were able to make their spoiled water infiltrated into the ground. Thereafter, it was recommended to develop some protecting methods and to install some suitable faculties to clean water.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.420-429
• /
• 2002

The amount of $CO_2$-silicate bonded waste foundry sand(WFS) occurred in Korea is over 800,000 ton per year. WFS, as a by-product, is generated through manufacturing process of foundry may affect our environmental contamination, The reason is that WFS has been buried itself not less than 90％ out of total WFS. So, it can give damage on the ground of contamination in soil and underwater. Therefore, it is necessary to establish the method recycling WFS because of being intensified waste management law. In this study, we performed the research with respect to harmful component analysis, the qualities of WFS mortar and concrete mixed with WFS. As the results the specific gravity of WFS is the same as that of natural aggregate while unit weight and percentage of solids of WFS are smaller than those of it. But it is found that WFS can be used by substituting WFS for natural aggregate after control of poor grade of WFS. The flowability of mortar and concrete with WFS is inferior to those of natural aggregate, and the setting time of concrete with WFS is faster than that with only natural aggregate, On the contrary, the bleeding of concrete with WFS is shown good result, and compressive and tensile strength of concrete substituted WFS for 30％ are higher than those with only natural aggregate regardless of elapsed time.

• Journal of the Korean Society of Costume
• /
• v.61 no.5
• /
• pp.1-20
• /
• 2011

As a follow-up of a study on design strategies to improve Korea's Korean coast guarduniforms, this study set out to propose Korean coast guard uniforms of a new concept that would meet the changing needs of the times and match the advanced technology and work environments. Three concepts of classical, nautical and techno chic were identified from the design strategies of the previous study. Using the results from a prototype show and preference survey, the investigator divided items into design, color, material, and detail and reflects demands for each of them. As a result, design was examined in four aspects of identity, acknowledgement, unity, and practicality and focused its improvement factors on design differentiated from other organizations' uniforms including ground police, segmentation of size system, adjustment of the length of upper garment to consider activity, and changes to the lines and silhouette to give out a modern image. As for color, the focus was placed on differentiated colors from other organizations' uniforms including ground police through dark blue and ocean color, change toward colors that reflect environmental characteristics, and unity in colors between the summer and winter uniform. As for material, the focus of improvement was put on elasticity, resistance against contamination, warmth retention, texture, wearing sensation, and functionality by taking into account convenience for field workers on coast guard vessels and branch offices who have much time in contact with ocean environments in order to make the materials high-grade. As for detail, structural details were added to give out a modern image such as changing the detail lines, efficiency of storage space, buttons, sleeve hems, ironing lines, and neck collars by taking into account environmental characteristics. The significance of the study lies in that it proposed a development model for large-scale uniform copy design by establishing copy design that secures functionality and is proper for an organization's social and cultural environment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2013

Borehole Disposal Concept (BDC) was initiated by the South African Nuclear Energy Corporation (NECSA) with the view to improve the radioactive waste management practices in Africa. At a time when geological disposal of radioactive waste is being considered, the need to protect ground water from possible radioactive contamination and the investigation of radionuclides migration through soil and rocks of zone of aeration into ground water has becomes very imperative. This is why the Borehole Disposal Concept (BDC) is being suggested to address the problem. The concept involves the conditioning and emplacement of disused sealed radioactive sources in an engineered facility of a relatively narrow diameter borehole (260 mm). Tanzania is operating a Radioactive Waste Management Facility where a number of spent sealed radioactive sources with long and short half lives are stored. The activity of spent sealed radioactive sources range from (1E-6 to 8.8E+3 Ci). However, the long term disposal solution is still a problem. This study therefore proposing the country to adopt the BDC, since the repository requires limited land area and has a low probability of human intrusion due to the small footprint of the borehole.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.305-313
• /
• 2000

A vicarious calibration method was developed for the OSMI sensor calibration. Employing measured aerosol optical thickness by a sunphotometer and a sky radiometer and water leaving radiance by ship measurements as inputs, TOA (top of the atmosphere) radiance at each OSMI band was simulated in conjunction with a radiative transfer model (Rstar5b) by Nakajima and Tanaka (1988). As a case of examining the accuracy of this method, we simulated TOA radiance based on water leaving radiance measured at NASA/MOBY site and aerosol optical thickness estimated nearby at Lanai, and compared simulated results with SeaWiFS-estimated TOA radiances. The difference falls within about $\pm$5%, suggesting that OMSI sensor can be calibrated with the suggested accuracy. In order to apply this method for the OSMI sensor calibration, ground-based sun photometry and ship measurements were carried out off the east coast of Korean peninsula on May 31, 2000. Simulations of TOA radiance by using these measured data as input to the radiative transfer model show that there are substantial differences between simulated and OSMI-estimated radiances. Such a discrepancy appears to be mainly due to the cloud contamination because satellite image indicates optically thin clouds over the experimental area. Nevertheless results suggest that sensor calibration can be achieved within 5% uncertainty range if there are ground-based measurements of aerosol optical thickness, and water leaving radiances under clear-sky and optically thin atmospheric conditions.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2024

In this study, a selecvively block barrier was developed to prevent the spread of contaminants (TPH, Phenol) in the ground only when contamination occurs. The materials were used Jumunjin sand, bentonite, polyolefin elastomer and spill hound marine. First, the properties and environmental hazards characteristics of materials were analyzed for evaluated their usability. Then, the possibility of use as a barrier material was confirmed by analyzing the water permeability characteristics that change after 24 hours of contact with contaminants. As a result of the analysis, the pH of each component was similar to the general groundwater pH range. In addition, the toxicity characteristics and the possibility of dissolution of hazardous substances, it was determined that there was no environmental hazard as the content was below the regulation value. Lastly, when comparing the permeability coefficient before and after contact with the contaminant, the permeability coefficient of approximately α × 10^-3cm/sec before contact was reduced to α × 10^-6cm/sec after contact with the contaminant.