• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.170-175
• /
• 2009

Apartment housing block has been spreaded according to rapid economic development and urbanization in Korea. A parking lot is located at underground, artificial ground is inevitably created in apartment housing block. Artificial ground creates different thermal environment compared to natural ground, because the composition and coverage of artificial ground are diverse. In this study, the effect of the artificial ground on building thermal environment will be disscussed by simulation. Considering the result of simulation, surface albedo is more important for building energy performance. A purpose of this study is to examine how the characteristic of surface effect to thermal environment, and to develop design method for sustainable outdoor space.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.427-431
• /
• 2013

Ground heat pump systems utilize the annually stable underground temperature to supply heat for space heating and cooling. The underground temperature affects not only the underground ecosystem, but also the performance of these systems. However, in spite of the widespread use of these systems, there have been few researches on the effect of the systems on underground temperature. In this research, case studies with numerical simulation have been conducted, in order to estimate the effect of ground heat pump systems on underground temperature. The simulation was coupled with the ground water-ground heat transfer model and the ground surface heat transfer model. In the result, it was found that the underground change depends on the heat transfer from the ground surface, the heat exchange rate, and the heat conductivity of soil.

• Smart Structures and Systems
• /
• 제20권1호
• /
• pp.23-33
• /
• 2017

Variable Curvature Friction Pendulum (VCFP) bearing is one of the alternatives to control excessive induced responses of isolated structures subjected to near-fault ground motions. The curvature of sliding surface in this isolator is varying with displacement and its function is non-spherical. Selecting the most appropriate function for the sliding surface depends on the design objectives and ground motion characteristics. To date, few polynomial functions have been experimentally tested for VCFP however it needs comprehensive parametric study to find out which one provides the most effective behavior. Herein, seismic performance of the isolated structure mounted on VCFP is investigated with two different polynomial functions of the sliding surface (Order 4 and 6). By variation of the constants in these functions through changing design parameters, 120 cases of isolators are evaluated and the most proper function is explored to minimize floor acceleration and/or isolator displacement under different hazard levels. Beside representing the desire sliding surface with adaptive behavior, it was shown that the polynomial function with order 6 has least possible floor acceleration under seven near-field ground motions in different levels.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.323-329
• /
• 2011

Purpose: This study was conducted to examine the phase transition according to the zirconia surface treatment. Methods: The specimens were divided to four groups. The first group was sintered at $1,500^{\circ}C$ and ground; the second group was sintered at $700^{\circ}C$, ground, and sintered at $1,500^{\circ}C$; the third group was sintered at $1,500^{\circ}C$, ground, and $110{\mu}m$-sandblasted; and the fourth group was sintered at $1,500^{\circ}C$, ground, $110{\mu}m$-sandblasted, treated with 9.5% hydrofluoric acid, and ultrasonic cleaner-washed for two minutes. The monoclinic fractions were measured, and the surface was observed via SEM. Results: The monoclinic fraction was $0.13{\pm}0.19%$ in the control group Zr1, $1.91{\pm}0.15%$ in the experimental group Zr2, $7.71{\pm}0.34%$ in Zr3, and $8.39{\pm}0.25%$ in Zr4. On the surface, the phase transition hardly occurred in the control group Zr1, but it increasingly occurred in the experimental groups Zr3 and Zr4. Conclusion: The monoclinic fraction was high in the experimental groups Zr3 and Zr4. The phase transition did not occur in the control group, but increasingly occurred in the experimental groups.

• 생태와환경
• /
• 제49권4호
• /
• pp.271-278
• /
• 2016

Forest clear-cutting operations influence biodiversity through habitat changes and food resource availability for inhabitant species. This study examined the effects of clear-cutting on forest arthropod communities. Arthropods were collected from two different forest treatment areas (clear-cut and control) in summer and autumn. In each treatment area, arthropods were sampled from both crown and ground surfaces using sweeping and pitfall trap methods, respectively. Then, the taxonomic order of the collected arthropod specimens was easily identified. Results indicate that arthropod abundance and number of taxa present were higher at ground surface than at crown levels in both clear-cut and control areas. At crown level, more homopteran species were present in clear-cut areas than in control areas in summer. At ground surface, populations of Isopoda and Opiliones were higher in control areas than in clear-cut areas, whereas numbers of Araneae, Orthoptera, and Hymenoptera were greater in clear-cut areas. Cluster analysis and principal component analysis showed distinct differences between clear-cut and control communities at crown level in summer and at ground surface in autumn. Thus, our results indicate that clear-cutting significantly influences arthropod communities, and higher taxa are valuable for conducting rapid biological assessments of ecosystem disturbances.

• 한국항공우주학회지
• /
• 제36권8호
• /
• pp.728-733
• /
• 2008

경계요소법을 이용하여 비평면 지면 위를 움직이는 공압부양 고속 지상운송체의 비정상 공력해석을 수행하였다. 비정상 공력해석을 위하여 시간전진법과 이에 연계한 자유후류를 도입하였다. 공압부양 고속 지상운송체가 채널 내를 움직일 때, 채널에 갇힌 공기에 의해 지면효과가 증가하여 운송체의 양력계수와 피칭모멘트 계수가 더욱 증가한다. 즉, 채널과 같은 비평면 지면은 운송체의 종방향 불안정성을 증가시킨다. 반면, 채널과 같은 비평면 지면에 의한 양력상승이 운송체 탠덤날개의 왼쪽과 오른쪽에 동일하게 발생하기 때문에 채널과 같은 비평면 지면효과가 운송체의 횡방향 안정성에 미치는 영향은 크지 않다.

• 한국터널지하공간학회 논문집
• /
• 제20권3호
• /
• pp.609-623
• /
• 2018

건물하중의 영향을 받는 상태의 기존터널에 근접해서 터널보다 깊은 심도로 지반을 굴착하는 경우에 흙막이벽체의 거동이 기존터널의 존재로 인해 큰 영향을 받는 것으로 알려져 있다. 그런데 지상 구조물에 의해 받는 영향에 대한 연구 예가 많지 않다. 따라서 본 연구에서는 기존터널에 근접하여 지반을 굴착할 때 기존터널이 상부구조의 영향을 받는 상태에서 건물 위치에 따른 터널의 거동을 대형모형실험과 수치해석을 실시하여 측정하였다. 이를 위해 지표면에 건물하중이 없는 경우와 건물하중이 3가지 이격거리에 위치한 경우(0 m, 1D, 2D)에 대하여 각각 대형모형실험을 수행하였다. 본 논문에서는 흙막이벽체와 기존구조물의 영향을 받고 있는 터널의 거동에 대하여 연구하였다. 1 : 10의 축척으로 2.0 m (폭)${\times}$6 m (높이)${\times}$4.0 m (길이)의 크기를 가진 대형토조에서 실험을 수행하였다. 그 결과 흙막이벽체 배면에 있는 인접터널의 안정성은 근접굴착에 의해 뚜렷하게 영향을 받는 것으로 나타냈다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.1-8
• /
• 1995

This paper proposed a simple method for measuring surface roughness of ground surface. utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens a detecting unit with polygon mirror and CCD array sensor. and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultanilusly monitor the state of the grind wheel. The experimental results, showed that the increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min. the feed rate is 0.2m/min-0.9m/min, the dressing speed is 0.2mm/rev-0.4mm/rev, the stylus method and the in-process method can be obtained the same results. thus under limited working conditions. using the proposed system. the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.35-39
• /
• 2001

The precision grinding process is carried out with fine-cutting operation after coarse-cutting operation. So, the laminated grinding wheel has been developed to reduce the ineffectiveness induced by changing the operations. In this study, to investigate the possibility of the practical use of the laminated grinding wheel, the surface residual stress of the workpiece ground by the laminated grinding wheels was compared with that ground by the general grinding wheel, and the influence of the difference in grain sizes, between the coarse grit and fine grit of the laminated grinding wheel, on the surface roughness of the workpiece was investigated.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.9-16
• /
• 2004

Because a generated heat during grinding operation makes a serious deformation on a ground surface as a convex form, a real depth of cut in deformed zone has larger than an ideal depth of cut. Consequently, the ground surface has a geometric error as a concave form after cooling the workpiece. In this study, the force and the geometric error of surface grinding were examined. From evaluating magnitude and mode of the geometric error according to grinding conditions, an optimal grinding condition was proposed to minimize the geometric error. In addiction the relationship between the geometric error and the grinding force was found out. Due to least square regression it was able to predict the geometric error by using the grinding force.