• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.11-18
• /
• 1985

A row of bored piles has been used in several excavation works to retain the earth. This excavation bracing system has much effect on low-vibration and low-noise during construction. The system is also effective to provide protection to the adjacent existing ground and structures. For the purpose of establishment of a logical design method for the bored piles, first, a theoretical equation to estimate the resistance of piles is derived. Because arching action of soils between piles is considered in the equation, the characteristics of soils and the installation condition of piles would be considered logically from the beginning. Then a method is investigated to decide the interval ratio of piles. According to the method, the interval between piles can be decided from the information of the Peck's stability number, the coefficient of lateral earth pressure and the internal friction angle of soil. Finally, a design method is presented for the bored piles used for excavation work. In the presented design method, such factors as depth of excavation, pile diameter, interval between piles, pile length below bottom of excavation and pile stiffness, can be selected systematically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.219-227
• /
• 1993

Broadcast-seeded rice in submerged paddy frequently lodge in the field. In general, the causes of lodging in rice cultivation differ with different cultural methods. This study was conducted to investigate the causes of lodging in broadcast-seeded rice (BSR) and hand-transplanted rice (HTR) under four nitrogen (N) levels. Lodging in BSR was mainly a root lodging due to shallow root distribution, while that in HTR showed a bending type owing to deep rooting system. At the upper soil layer (0-5cm from the surface of ground) the root distribution of BSR (65.2%) was much larger than that of HTR (51.6%), whereas at the 5-10cm soil layer the root distribution of BSR (18.5%) was much smaller than that of HTR (28.0%). The depth of buried culm base was much shallower in BSR (1.2cm) than in HTR (4.0cm). The plant height, fresh weight, lodging index, culm diameter and thickness in HTR were much greater than those in BSR, and the breaking strength of lower internode was similar in the two cultivation methods indicating that HTR would have more lodging causes than BSR. In spite of . the more advantages to lodging resistance in BSR it severely lodged in the field. The main lodging-inducing factors of BSR were the shallow root distribution and shallow depth of buried culm base. Besides these, the higher ratio of gravity center of culm was an important factor. This result suggested that for the fundamental prevention of lodging in BSR, an ideotype of rice plant with ' a deep-rooted behavior ' should be developed.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.333-352
• /
• 2017

A comparison study is made between the dynamic properties of an argillaceous siltstone and its grouting-reinforced body. The purpose is to investigate how grout injection can help repair broken soft rocks. A slightly weathered argillaceous siltstone is selected, and part of the siltstone is mechanically crushed and cemented with Portland cement to simulate the grouting-reinforced body. Core specimens with the size of $50mm{\times}38mm$ are prepared from the original rock and the grouting-reinforced body. Impact tests on these samples are then carried out using a Split Hopkinson Pressure Bar (SHPB) apparatus. Failure patterns are analyzed and geotechnical parameters of the specimens are estimated. Based on the experimental results, for the grouting-reinforced body, its shock resistance is poorer than that of the original rock, and most cracks happen in the cementation boundaries between the cement mortar and the original rock particles. It was observed that the grouting-reinforced body ends up with more fragmented residues, most of them have larger fractal dimensions, and its dynamic strength is generally lower. The mass ratio of broken rocks to cement has a significant effect on its dynamic properties and there is an optimal ratio that the maximum dynamic peak strength can be achieved. The dynamic strain-softening behavior of the grouting-reinforced body is more significant compared with that of the original rock. Both the time dependent damage model and the modified overstress damage model are equally applicable to the original rock, but the former performs much better compared with the latter for the grouting-reinforced body. In addition, it was also shown that water content and impact velocity both have significant effect on dynamic properties of the original rock and its grouting-reinforced body. Higher water content leads to more small broken rock pieces, larger fractal dimensions, lower dynamic peak strength and smaller elastic modulus. However, the water content plays a minor role in fractal dimensions when the impact velocity is beyond a certain value. Higher impact loading rate leads to higher degree of fragmentation and larger fractal dimensions both in argillaceous siltstone and its grouting-reinforced body. These results provide a sound basis for the quantitative evaluation on how cement grouting can contribute to the repair of broken soft rocks.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.69-82
• /
• 2005

These studies were carried out (1) to investigate the growth characteristics of Sedum album L. in the field, (2) to propose a suitable shallow peen roof system for this plant, and (3) to evaluate plant growth in the proposed system over the long term. The growth characteristics, such as morphological properties, growth habit, shade tolerance, and flowering, were surveyed. In experimental shallow green-roof systems, the effects of drainage type, substrate type, and soil depth on plant growth were investigated. Then drought tolerance was investigated. After planting Sedum album L. in the proposed system survival rate, cover, and resistance to insects, heal and cold were evaluated for about 2 years. The results of these studies are summarized below. 1. In the field, the aboveground part of Sedum album L. did not die back during the winter. Plant height was 4$\sim$7 cm. Roots were distributed to a depth of 5$\sim$7 cm. Sedum album L. is a compact ground-cover plant that spreads vigorously. Shading condition of less than $30\%$ of full sunlight didn't cause any trouble, but shading conditions above $87\%$ made the shape of the shoots and leaves abnormal. The plant bloomed from June to August and had a rather large compound umbel of white, star-shaped flowers. 2. Two systems, a drainage-blend-10 cm soil depth and a reservoir$\cdot$drainage-blend-15 cm soil depth, performed best in terms of cover, fresh weight, and dry weight. The first has an advantage for green roofs because it is lighter than the latter. 3. In drainage-blend-10 m soil depth and modified reservoir · drainage-blend-10 cm soil depth system no plants died for about 4 months after stopping the irrigation. The visual quality of the latter system was above 5 for 4 months and that of the former was under 5 after 2 months. In the field, however, the drought tolerance of Sedum album L. grown in the former would be enough to withstand the dry season. Considering the urban ecosystem and the importance of healthy growth the modified reservoir $\cdot$ drainage-blend-10 cm soil depth system was finally recommended. This system was composed of a 4 cm thick drainage layer and drain outlets placed at a height of 2.5 cm. 4. In the proposed system, the survival rate was $100\%$, and there was no injury induced by insects and heat. The leaf density decreased a little in winter. Cover increased throughout the year. Sedum album L. was planted with a cover of 72$cm^{2}$ on 3 April 2003; on 16 June 2003 and 15 June 2004, cover was $132.66\pm$5.87 $cm^{2}$(1.8 times) and $886.98\pm$63.51 $cm^{2}$(12.3 times), respectively.

• Nutritional Sciences
• /
• v.7 no.2
• /
• pp.65-69
• /
• 2004

A study was carried out to determine the effect of a very low-carbohydrate diet on weight gain, body composition, and serum levels of cholesterol, triacylglycerol, glucose, ketone bodies and insulin. Twenty rats (mean initial weight, 212 g) were divided into two groups and each group was assigned a conventional high-carbohydrate diet (control) or a very low-carbohydrate diet containing 59.8% ground pork rind snack and fed the diet for four weeks. Average daily body weight gain was not different between the two groups during the first two weeks, but was significantly lower in rats fed the very low-carbohydrate diet than in those in the control group during third (p<0.05) and fourth weeks (p<0.01). Feedintake as well as energy intake was lower in rats fed the very low-carbohydrate diet than in those in the control group. The very low-carbohydrate diet reduced (p<0.01) serum triacylglycerol (34$\pm$83 vs 82$\pm$8 mg/l00 mL) and insulin (3.90$\pm$0.53 vs 7.60$\pm$0.61 $\mu$IU/mL) levels, while increasing (p<0.01) ketone body level (368$\pm$25 vs 236$\pm$24 $\mu$mol/L), compared with the control. Serum glucose and total cholesterol levels were not different (p>0.05) between the two dietary treatments. Proximate analysis of carcasses showed that the very low-carbohydrate diet decreased (p<0.01) body fat (26.1$\pm$1.04 vs 30.5$\pm$0.86%), while increasing (p<0.01) body protein (63.1$\pm$0.94 vs 59.4$\pm$0.70%) contents. Results indicate that short-term feeding of a very low-carbohydrate diet is beneficial for alleviating risk factors known to involve cardiovascular diseases or artherosclerosis. However, more studies with model animals as well as humans are recommended to examine the long-term health benefits of low-carbohydrate diets.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.5
• /
• pp.35-46
• /
• 2015

In this study, the behavior of self-supported earth retaining wall with stabilizing piles was investigated by using a numerical study and field tests in urban excavations. This earth retaining wall can provide stable support against lateral earth pressures through its use of stabilizing piles that provide passive resistance to lateral earth pressures arising due to ground excavations. Field tests at two sites were performed to verify the performance of instrumented retaining wall with stabilizing piles. Furthermore, detailed 3D numerical analyses were conducted to provide insight into the in situ wall behavior. The 3D numerical methodology in the present study represents the behavior of the self-supported earth retaining wall with stabilizing piles. A number of 3D numerical analyses were carried out on the self-supported earth retaining wall with stabilizing piles to assess the results stemming from wide variations of influencing parameters such as the soil condition, the pile spacing, the distance between the front pile and the rear pile, and the pile embedded depth. Based on the results of the parametric study, the maximum horizontal displacement and the maximum bending moment significantly decreased when the retaining wall with stabilizing piles is used. Moreover, the horizontal displacement reduction effect of influencing parameters such as the pile spacing and the distance between the front pile and the rear pile is more sensitive in sandy soil, with a higher friction angle compared to clayey soil. In engineering practice, reducing the pile spacing and increasing the distance between the front pile and the rear pile can effectively improve the stability of the self-supported earth retaining wall with stabilizing piles.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.6
• /
• pp.5-11
• /
• 2020

Recently, due to the liquefaction caused by earthquakes in Pohang and surrounding areas, the importance of researches on the liquefaction assessment has increased. The possibility of liquefaction can be assessed using the geotechnical information. The cyclic resistance ratio (CRR) value used in the assessment of liquefaction can be determined by using the SPT-N values or shear wave velocity, V_s value. A study was conducted to compare the accuracy of the liquefaction assessment using these two types of geotechnical information, and concluded that the results using SPT-N values are more accurate than those using V_s values. The previous study speculated that the used V_s value was measured at a depth of 12 m uniformly without considering the critical depth of liquefaction. Therefore, 10 empirical equations that convert SPT-N values measured at critical depth of liquefaction into V_s values to confirm the validity of geotechnical information measured at 12 m points uniformly are used to assess the liquefaction possibility and the results were compared with the actual liquefaction results to confirm the accuracy. As a result, 7 out of 10 cases considering critical depth for liquefaction show higher accuracy than those not considered.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.32-46
• /
• 2017

Recent rapid urban expansion and crowding of various industrial facilities has affected the features of a significant part of downtown area, resulting in areas having buildings with a wide range of height and the foothills. To compute a velocity pressure exposure coefficient, namely the design wind speed factor, this study defines ground surface roughness by utilizing concentration analysis for the height of each building. After obtaining spatial data by extracting a building layer from digital maps, the study area was partitioned for the concentration analysis and to allow investigation of the frequency distribution of building heights. Concentration analysis by building height was determined with the Variation-to-Means Ratio (VMR) and Poisson distribution analysis using a buildings distribution chart, with statistical significance determined using Chi-square verification. Applying geographic information systems (GIS) with the architectural information made it possible to estimate a velocity pressure exposure coefficient factor more quantitatively and objectively, by including geographic features, as compared to current methods. Thus, this method is expected to eliminate inaccuracies that arise when building designers calculate the velocity pressure exposure coefficient in subjective way, and to help increase the wind resistance of buildings in a more logical and cost-effective way.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.393-399
• /
• 2007

Concrete bridge decks are directly exposed to the severe environmental conditions such as rain water and deicing chemicals resulting in the freeze-thaw action and the rebar corrosion during their service lift. These deteriorations of bridge decks shorten the service lift and consequently they are the major concerns of the maintenance. The high performance concrete (HPC) deck is proposed as the alternative to minimize the deterioration problems. To develop more durable concrete deck, the performance characteristic tests of HPC mixtures were carried out. In this study, 4 different concrete mixtures were used varying the mineral admixtures as the cement replacement; ordinary portland cement (OPC), 20% fly ash (FA),20% fly ash with 4% silica fume (FS), and 40% ground granulated blast-furnace slag (BS). The design compressive strengths of HPC specimens were 27 MPa and 35 MPa, respectively. The results showed that the compressive strength of concrete did not much affect the durability of concrete. HPC with fly ash and silica lune (FS) were turned out to have the good durability and crack resistance.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.405-412
• /
• 2008

Six alkali-activated (AA) concrete mixes were tested to explore the significance and limitations of developing an environmental friendly concrete. Ground granulated blast-furnace slag and powder typed sodium silicate were selected as source material and an alkaline activator, respectively. The main parameter investigated was the replacement level of lightweight fine aggregate to the natural sand. Workability and mechanical properties of lightweight AA concrete were measured: the variation of slump with time, the rate of compressive strength development, the splitting tensile strength, the moduli of rupture and elasticity, the stress-strain relationship, the bond resistance and shrinkage strain. Test results showed that the compressive strength of lightweight AA concrete sharply decreased when the replacement level of lightweight fine aggregate exceeded 30%. In particular, the increase in the discontinuous grading of lightweight aggregate resulted in the deterioration of the mechanical properties of concrete tested. The measured properties of lightweight AA concrete were also compared, wherever possible, with the results obtained from the design equations specified in ACI 318-05 or EC 2, depending on the relevance, and the results predicted from the empirical equations proposed by Slate et al. for lightweight ordinary Portland cement concrete. The stress-strain curves of different concrete were compared with predictions obtained from the mathematical model proposed by Tasnimi. The measured mechanical properties of lightweight AA concrete generally showed little agreement with the predictions obtained from these equations.