• 한국토양비료학회지
• /
• 제47권3호
• /
• pp.217-224
• /
• 2014

Ground-based remote sensing can be used as one of the non-destructive, fast, and real-time diagnostic tools for predicting yield, biomass, and nitrogen stress during growing season. The objectives of this study were: 1) to assess biomass and nitrogen (N) status of tobacco (Nicotiana tabacum L.) plants under N stress using ground-based remote sensors; and 2) to evaluate the feasibility of spectral reflectance indices for estimating an application rate of N and predicting yield of tobacco. Dry weight (DW), N content, and N uptake at the 40th and 50th day after transplanting (DAT) were positively correlated with chlorophyll content and normalized difference vegetation indexes (NDVIs) from all sensors (P<0.01). Especially, Green NDVI (GNDVI) by spectroradiometer and Crop Circle-passive sensors were highly correlated with DW, N content and N uptake. The yield of tobacco was positively correlated with canopy reflectance indices measured at each growth stage (P<0.01). The regression of GNDVI by spectroradiometer on yield showed positively quadratic curve and explained about 90% for the variability of measured yield. The sufficiency index (SI) calculated from data/maximum value of GNDVI at the $40^{th}$ DAT ranged from 0.72 to 1.0 and showed the same positively quadratic regression with N application rate explaining 84% for the variability of N rate. These results suggest that use of reflectance indices measured with ground-based remote sensors may assist in determining application rate of fertilizer N at the critical season and estimating yield in mid-season.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.685-688
• /
• 2004

Fresh water discharge from the sea floor strongly affects a coastal ecology and the diffusion of contaminants. Much fresh water discharge has been found in the edge of Kurobe alluvial fan, in which annual rainfall is over 4000mm and there is abundant groundwater. However, it is difficult to find the groundwater discharge, thus the search of possible areas with some remote sensing tools is required. Because the temperature of the discharge point is relatively low compared with the surrounding sea water surfaces, there is a possibility to detect the area as an irregular zone of thermal infrared images. Two anomalous temperature zones, which have no surface streams from rivers, are detected by ASTER thermal-infrared images. One of them was verified as the groundwater discharge point by dives. In addition, the distribution of water table under the land side of the two areas is also detected as irregular zones by a ground-penetrating radar

• 대한원격탐사학회지
• /
• 제7권1호
• /
• pp.29-43
• /
• 1991

The study was performed to extraction the ground water potential area using LANDSAT TM data. The image processing techniques developed for the study are contrast transformation, differential filtering and pseudo stereoscopic image methods. These were examined for lineament extraction, lineament interpretation and the integration of vertor data with LANDSAT data. The differential filtering method is much usefull for lineament extraction, and all direction lineaments are clearly shown on the band 5 image of LANDSAT TM. The pseudo stereoscopic image are made in which color differential method is adopted, the pair images are usefull for the lineament interpretation. The results of the analysis are as follows. 1) there is a close correlation between lineament and cased well in the study area, because 33 wells of the developed 45 cased wells coincide with the lineaments. 2) 21 sites in the study area were selected for pumping test, and as a result 11 sites of them produces over than 200 ton/day.

• 대한원격탐사학회지
• /
• 제7권1호
• /
• pp.45-67
• /
• 1991

An overview is given on stochastic techniques with which remotely sensed data may be used together with ground measurements for purposes of state estimation and prediction. They can explicitly account for spatiotemporal differences in measurement characteristics between ground measurements and remotely sensed data, and are suitable for highly variant space or space-time processes, such as atmosperic processes, which may be viewed as (containing) a random process. For state estimation of static ststems, optimal linear estimation is described. As alternatives, various co-kriging estimation techniques are also described, including simple, ordinary, universal, lognormal, disjunctive, indicator, and Bayesian extersion to simple and lognormal. For illustrative purposes, very simple examples of optimal linear estimation and simple co-kriging are given. For state estimation and prediction of dynamic system, distributed-parameter kalman filter is described. Issues concerning actual implemention are given, and with application potential are described.

• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.189-198
• /
• 2007

Introduction of lidar technology have contributed to a wide range of applications in generating quality surface models. Accordingly, because of the importance of terrain surface models in mapping applications, rigorous studies have been performed to extract ground points from a lidar data point cloud. Although most filters have been shown abilities to extract ground points with their parameters tuned, however, most experiments revealed that there are certain limitations in optimizing filter parameters and the correction of remaining misclassified points is not straightforward. In this study, therefore, a method to improve the quality of filtered lidar data is proposed, which exploits neighboring surface properties arising between immediate neighbors. The method comprises a sequence of procedures which can reduce commission and omission errors. Commission errors occurring in low-rise objects are reduced by utilizing morphological operations. On the other hand, omission errors are reduced by adding missing ground points around step edges. Experimental results show that the qualities of filtered data can be improved considerably by the proposed method.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.463-471
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using digital terrain model (DTM) and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method used in a previous research. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.739-744
• /
• 2002

Recently we have discovered that sediments should be separated from lithosphere, and soil should be separated from biosphere, both sediment and soil will be mixed sediments-soil-sphere (Seso-sphere), which is using particulate mechanics to be solved. Erosion and sediment both are moving by particulate matter with water or wind. But ancient sediments will be erosion same to soil. Nowadays, real soil has already reduced much more. Many places have only remained sediments that have ploughed artificial farming layer. Thus it means sediments-soil-sphere. This paper discusses sediments-soil-sphere erosion modeling. In fact sediments-soil-sphere erosion is including water erosion, wind erosion, melt-water erosion, gravitational water erosion, and mixed erosion. We have established geographical remote sensing information modeling (RSIM) for different erosion that was using remote sensing digital images with geographical ground truth water stations and meteorological observatories data by remote sensing digital images processing and geographical information system (GIS). All of those RSIM will be a geographical multidimensional gray non-linear equation using mathematics equation (non-dimension analysis) and mathematics statistics. The mixed erosion equation is more complex that is a geographical polynomial gray non-linear equation that must use time-space fuzzy condition equations to be solved. RSIM is digital image modeling that has separated physical factors and geographical parameters. There are a lot of geographical analogous criterions that are non-dimensional factor groups. The geographical RSIM could be automatic to change them analogous criterions to be fixed difference scale maps. For example, if smaller scale maps (1:1000 000) that then will be one or two analogous criterions and if larger scale map (1:10 000) that then will be four or five analogous criterions. And the geographical parameters that are including coefficient and indexes will change too with images. The geographical RSIM has higher precision more than mathematics modeling even mathematical equation or mathematical statistics modeling.

• 대한원격탐사학회지
• /
• 제15권3호
• /
• pp.167-175
• /
• 1999

원격탐사 관련 핵심기술은 최근에 국방, 의료영상, 환경, 지질 등과 같은 광범위한 분야에서 활용범위를 확대하고 있다. 1cm ~ 수십 cm 파장의 파를 관측하는 마이크로파 원격탐사 기술은 반사 적외선 원격탐사나 열 적외선 원격탐사 기술에 비해 날씨조건과 밤낮에 관계없이 탐사를 수행할 수 있다는 장점을 가지고 있다. 마이크로파 영상레이다인 합성 개구 레이다를 이용한 영상화 방식은 응용목적에 따라 stripmap 방식, spotlight 방식, 그리고 inverse 방식으로 구분된다. 본 논문에서는 inverse 방식으로 지상에 고정된 레이다가 비행하는 항공체를 영상화하는 기법에 대해서 기술하였다. 비행 항공체의 영상화 기법은 자동 펴적인식 시스템 구축시 중요한 기술단계이며, 최근 이 분야에 대해 활발히 연구되고 있다. 비행 항공체를 영상화하기 위해 제안된 3가지 방식인 퓨리에 처리 기법, 시간-n 주파수 처리 기법, 그리고 투시로부터 복원 기법을 소개한 후, 각 방식의 장단점을 분석하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.303-303
• /
• 1999

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.456-456
• /
• 2004