• Geomechanics and Engineering
• /
• 제9권4호
• /
• pp.483-498
• /
• 2015

This article describes a new in-situ load test called the Hydraulic Cylinder Test (HCT) and its application to determine the geotechnical properties of soil-rock mixtures. The main advantages of the test are its easy implementation, speed of execution and low-cost. This article provides a detailed description of the equipment and the test procedure, and examines a case study of its application to determine the geotechnical properties of an earth-filled dam for a tailings pond. The containment dams of the ponds are made from blocks of gypsum and marl, obtained from the excavation of the ponds, mixed in a matrix of sands and clays. The size of the rocks varies between 1 and 30 cm. The HCT is particularly useful for determining the geotechnical properties of this type of soil-rock mixture. Nine HCTs were carried out to determine its strength (c, ${\phi}$) and deformation (B, G) properties. The results obtained were validated using the Bim strength criterion, recently proposed, and some pressure meter tests carried out beforehand. The properties obtained are used to analyze the stability of the dam using computer simulations and a modification to its design is proposed.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.753-758
• /
• 2007

This study was conducted to investigate the antioxidant activity of paprika in the lard-pork model system adding ground fresh paprika (3%) and paprika powders (5%). Paprika powders were obtained through 4 drying methods (freeze, vacuum, far infrared-ray, and hot-air). In the lard and meat-fat mixture (containing lard 30%) containing paprika powders, the rate of increase in the peroxide value (POV) and thiobarbituric acid (TBA) value decreased notably during the refrigerated storage ($4^{\circ}C$) compared to the control without paprika. Therefore, paprika powders showed potent antioxidant activity and especially the freeze dried paprika powder revealed the most effective activity among them. However, its antioxidant activity was still lower than that of the fresh paprika because the addition of fresh paprika in the lard and meat-fat mixture merely increased the POV and TBA value. In linoleic acid oxidation, the addition of capsanthin 500 ppm to mixed linoleic acid and 10 ppm of $FeCl_3$ (LF) inhibited the formation of peroxides by 15.2% compared to LF, showing its iron scavenging ability. When mixed antioxidants (${\beta}$-carotene 200 ppm + ascorbic acid 100 ppm, capsanthin 200 ppm + ascorbic acid 100 ppm) were added in LF, synergistic effects were obtained with 57.7 and 60.4% of inhibition of peroxide formation, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1032-1039
• /
• 2010

Based on the proven feasibility of bottom ash and tire shred-soil mixtures as lightweight fill materials, tire shred-bottom ash mixtures were suggested as a new lightweight fill material to replace the conventional construction material with bottom ash. Therefore, we carried out the laboratory test, field compaction test and performance test of large scale embankment in order to evaluate their suitability for the use of lightweight fill materials in the before studies. We could verified that the ash, tire-shred and the mixture are able to be the useful materials as light fill materials. In this study, we built real scale embankment with RBA(Reclamated Bottom Ash), TRBA(Tire shred-Reclamated Bottom Ash mixture), WS(Weathered Soil), BA(Bottom Ash screened by 5mm sieve) for monitoring the behavior such as settlement, lateral displacement and water content change. Furthermore, we are examining the ground water quality in the surrounding area of the test embankment.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2033-2037
• /
• 2014

A reaction mixture was developed for formation of soft organic monolith that was easily smashed, rinsed, refluxed, filtered, and dried to give monolith particles having high pore volume of macropores. This phase was almost without mesopores. The reaction mixture was composed of methacrylic acid, ethylene glycol dimethacrylate, polyethylene glycol (porogen), and an initiator in a mixed solvent of toluene and isooctane. The selection of porogen and its amount was carefully carried out to obtain the optimized separation efficiency of the resultant phase. The median macropore size was 1.6 ${\mu}m$, and the total pore volume was 3.0-3.4 mL/g. The median particle size (volume based) was 15 ${\mu}m$, and the range of particle size distribution was very broad. Nevertheless the column (1 ${\times}$ 300 mm) packed with this phase showed good separation efficiency (N~10,000-16,000) comparable to that of a commercial column packed with 5 ${\mu}m$ C18 silica particles.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1506-1512
• /
• 2010

산악지형이 많은 지역에서의 고속철도 건설에는 노선의 선형상의 이유로 터널구간이 많이 존재하며, 터널 건설로 발생하는 암버럭을 유용하기 위하여 노반 건설은 주로 암과 흙의 혼합성토로 이루어지고 있다. 본 연구에서는 이암을 주암으로 하는 혼합토로 이루어진 고속철도 노반의 열차반복하중에 의한 침하특성을 분석하기 위하여 모형토조 실험을 수행하였다. 특히 강우 또는 지하수위 상승에 의한 노반의 포화도 증가가 열차 반복하중 작용 시 노반의 침하특성에 미치는 영향을 분석하기 위하여 초기 포화도 조건을 변화시키면서 실험을 수행하였다. 실험결과, 낮은 포화도 조건에서는 열차반복횟수가 증가할수록 침하가 어느 일정 값에 수렴하는 결과를 나타냈으나, 일정 수준 이상의 포화도 조건에서는 침하가 급격히 증가하는 것을 알 수 있었다. 따라서 노반의 포화도를 일정수준 이하로 관리하는 것이 침하 예방에 중요한 요소임을 확인 할 수 있었다.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.39-48
• /
• 2005

As the industrial development is accelerated, a new machining process and system are keenly required to achieve super precision surface finish. Especially to get ground surface finish fer complicated and narrow inner shape of molds, it is impossible with the existing methods so that a new method is being required to be developed. A new material, called Magic(MAGnetic Intelligent Compounds), is finally made and it is called Magic machining that uses this material. There is a way to make a material as follows, the mixture of magnetic particles, bonding material and particles of abrasive grain should be melt down by proper heat, and then this mixture put in a mold and cool down in magnetic field which has a uniform direction. This new polishing method is spotlighted as an excellent solution to the existing problems. However it hasn't reported any study about the influence of the machining conditions of polishing velocity, amplitude and polishing pressure to the surface roughness yet. This study would examine closely the influence of polishing conditions of the Magic polishing tool to the surface finish to decide the optimum polishing condition and to standardize the Magic polishing work.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.867-870
• /
• 2001

지지촉매로 Ni-graphite를 사용하고 ${C_2}{H_2}$를 이용한 열화학기상증착법에 의하여 탄소나노소재를 합성하였다. 합성된 시편은 SEM, TEM, 라만 분광법으로 분석하였으며, 수소저장특성은 전기화학적인 방법에 의하여 평가하였다. 탄소나노소재 합성시 메카노케미컬 처리과정을 거친 시편이 거치지 않은 시편에 비하여 탄소나노튜브의 순도가 우수하였다. 한편, 탄소나노소재를 정제함에 따라 수소저장특성이 크게 향상되었다.

• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.70-79
• /
• 2002

This study was conducted to develop environmental restoration methods for the ecological restoration of the rock exposed steep cut-slopes using native woody plants seeds by the hydro-seeding with artificial soil media. The main results are summarized as follows; 1. Quercus spp. seeded after seed treatment germinated over 80% and most of them grew well until one year. So, Quercus spp. can grow at the extremely dry rock exposed slopes revegetated by hydro-seeding with soil-fertilizer-seed mixed media. 2. The germinated seedlings grew well at the slopes oriented southeast. But in case of the survival ratio of the germinated seedlings, northwestward slopes was the best. 3. In case of the using pot seedlings of the Miscanthus sinensis var. purpurascens, it shows more beautiful scenery than the area using cool-season grasses. 4. As the results of the experiment, Albizzia julibrissin, Quercus spp. and Lespedeza crytobotrya can be useful at the restoration and revegatation of the cut-slopes. 5. At the results of the seed mixture experiment, cool-season grasses covered the ground quickly, but slowly germinated Quercus spp. and Lespedeza crytobotrya formed under story vegetation. Also, Albizzia julibrissin formed upper story vegetation will be replaced by Quercus spp. slowly.

• Steel and Composite Structures
• /
• 제43권3호
• /
• pp.389-401
• /
• 2022

This study investigated the flowability and mechanical properties of cost-effective steel fiber reinforced ultra-high performance concrete (UHPC) by using locally available materials for field-cast application. To examine the effect of mixture constituents, five mixtures with different fractions of silica fume, silica powder, ground granulated blast furnace slag (GGBS), silica sand, and crushed natural sand were proportionally prepared. Comprehensive experiments for different mixture designs were conducted to evaluate the fresh- and hardened-state properties of self-consolidating UHPC. The results showed that the proposed UHPC had similar mechanical properties compared with conventional UHPC while the flow retention over time was enhanced so that the field-cast application seemed appropriately cost-effective. The self-consolidating UHPC with high flowability and low viscosity takes less total mixing time than conventional UHPC up to 6.7 times. The X-ray computed tomographic imaging was performed to investigate the steel fiber distribution inside the UHPC by visualizing the spatial distribution of steel fibers well. Finally, the tensile stress-strain curve for the proposed UHPC was proposed for the implementation to the structural analysis and design.

• 한국환경과학회지
• /
• 제28권8호
• /
• pp.655-667
• /
• 2019

This research aims to identify the possibility of developing A horizon resources that can be used for construction and civil engineering work. As such, the utility of A horizon resources was examined by establishing planting ground through a mixture of soil layers and by analyzing the growth and development of Pinus densiflora. The physicochemical and physical properties of the soil were as follows: the A horizon was sandy clay loam, B horizon was sandy loam, and the mixture of two layers appeared as sandy loam, which was identical to the B horizon. The experimental groups did not show any significant difference in their physical properties of porosity and degree of water-stable aggregates. With regards to chemical properties, the A horizon as well as the mixture of A and B horizon showed acidity while the B horizon showed alkalinity. The figures of organic matter, total nitrogen, available phosphate, and replaceable potassium were greater as the A horizon content increased, whereas the figures of replaceable calcium, replaceable magnesium, and conductivity increased as the A horizon content decreased. As a result of the growth and development of Pinus densiflora in each planting ground, the final survival rates were all above 100%. However, the tree height and the rate of growth for the diameter of root were higher in the order of A horizon > A horizon + B horizon > B horizon,indicating that the increased A horizon content is related to the growth and development of Pinus densiflora. The treatment of soil with improvement agents, used to recover the functions of in-situ soil showing poor growth and development, did not have a clear impact on the soil texture and porosity. However, the degree of water-stable aggregates increased significantly when using O horizon as the soil improvement agent among the types of in-situ soil. In contrast, all items related to the chemical properties showed significant differences following the treatment by soil improvement agents. The survival rate according to the treatment of soil improvement agents for the growth and development of Pinus densiflora was higher in the order of organic horizon = no treatment > compound fertilizer > organic fertilizer + compound fertilizer > organic fertilizer; this result was statistically significant with a marginal significance value of the log-rank test(p < 0.05).