• PNF and Movement
• /
• 제20권1호
• /
• pp.59-66
• /
• 2022

Purpose: The aim of this research was to verify the relationship between three-dimensional (3D) ground reaction force (GRF) and severity of leg length discrepancy (LLD) while walking at a normal speed. It used a 3D motion analysis system with force platforms in standing workers with LLD. Methods: Subjects comprising 45 standing workers with LLD were selected. Two force platforms were used to acquire 3D GRF data based on a motion analysis system during gait. Vicon Nexus and Visual3D v6 Professional software were used to analyze kinetic GRF data. The subjects were asked to walk on a walkway with 40 infrared reflective markers attached to their lower extremities to collect 3D GRF data. Results: The results indicated the maximal force in the posterior and lateral direction of the long limb occurring in the early stance phase during gait had significant positive correlation with LLD severity (r = 0.664~0.738, p <0.01). In addition, the maximal force medial direction of the long limb occurring in the late stance phase showed a highly positive correlation with the LLD measurement (r = 0.527, p <0.01). Conclusion: Our results indicate that greater measured LLD severity results in more plantar pressure occurring in the foot area during heel contact to loading response of the stance phase and the stance push-off period during gait.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.434-436
• /
• 2000

It is difficult to accurately measure the ground resistance because it varies widely not only with the type of soil but also with the ground parameters; the moisture, the temperature the buried depth of electrodes, and the ground augmentation material and so on. Therefore, in this paper we analyzed the relation between the parameters and the resistance of ground in order to obtain a method of maintaining ground resistance stable. In experiments, the variation coefficients of ground resistance were calculated by the monthly measured data. The ground resistance decreases as the length of the ground rod increases. The variation between the ground resistance and the moisture rate of soil was low in case of using the ground augmentation material. Without the ground augmentation material, the ground resistance decreases as the moisture rate of soil increases. The ground resistance becomes small when the earth temperature becomes low.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.45-50
• /
• 1998

Tracheid length, microfibril angle, and compression strength were examined in south and north sides of Pinus koraiensis. The sample tree was 57 years old and had been planted in central Korea. Tracheid length on the south side of the tree ranged from 2.87 to 3.40mm and on the north ranged from 3.60 to 3.53mm and mean values were 3.15 mm for the south and 3.26mm for the north. Tracheid length was 0.11 mm longer on the north side than on the south. Microfibril angle on the south side ranged from $12.6^{\circ}$ to $20.3^{\circ}$ and that on the north from $6.8^{\circ}$ to $13.5^{\circ}$; mean values were $16.6^{\circ}$ on the south side and $9.6^{\circ}$ on the north. Microfibril angle was $7.0^{\circ}$ greater on the south side than on the north side. For compression strength on the south and north sides, significant difference at the 95% level was found only at l.3m above the ground level of the sample tree; for compression limit stress, significant difference at this level was found at 1.3 and 5.3m above the ground level. However, compression strength and compression limit stress were greater on the north side than on the south side.

• 한국지열·수열에너지학회논문집
• /
• 제12권3호
• /
• pp.24-32
• /
• 2016

Commercial buildings and institutions are generally cooling-dominated and therefore reject more heat to a borehole ground heat exchanger (BHE) than they extract over the annual cycle. Shallow ponds can provide a cost-effective means to balance the thermal loads to the ground and to reduce the length of BHE. This paper presents the analysis results of the impact of design parameters on the length of SWHE pipe and its application effect on geothermal heat pump (GHP) system using BHE. In order to analysis, we applied ${\varepsilon}-NTU$ method on designing the length of SWHE pipe. Analysis results show that the required pipe length of SWHE was decreased with the increase of approach temperature difference and with the decrease of pipe wall thickness. In addition, when the SWHE was applied to the GHP system, the temperature of BHE was more stable than that of standalone BHE system.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.895-903
• /
• 2013

This study analyzed on characteristics of the ground-water capture zone in coastal areas and mid-mountainous area according to pumping rate. For this study, it targeted Jejudo island where is the volcanic island. To analyze, MODFLOW model and MODPATH model, which are the ground-water flow analysis models, were used. As a result of research, the following conclusions could be obtained. As a result of analyzing influence of a change in pumping time upon length of capture zone, the length of capture zone in coastal area was indicated to be greater in the changing ratio compared to the length of capture zone in mid-mountainous area. Next, in the coastal area, the pumping rate and the capture-zone length are changing similarly. However, in mid-mountainous area, the length of capture zone was indicated to grow when the pumping rate comes to exceed 1,500m3/day. As a result of analyzing influence of a change in pumping time upon capture area, the tendency of a change in the area was indicated similarly in coastal areas and mid-mountainous area. Especially, it could be known that the larger pumping rate leads to the more definite increase in tendency to a change in capture area. Based on this study, it was allowed to be possibly used in the suitable pumping rate in coastal areas and mid-mountainous area of the volcano island in the future. A follow-up research is judged to necessarily analyze the influence of tubular-well group upon capture zone by additionally analyzing a change in capture zone targeting the concentrated tubular well.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.134-138
• /
• 2000

Most parts of alfalfa plant have been reported to contain autotoxic substances that inhibit seed germination and early seedling growth, however, the chemical(s) is not still studied much. Effect of seed leachates of 'Vernal' alfalfa (Medicago sativa L.) was evaluated for inhibition of alfalfa germination and root growth through bioassay. Alfalfa seeds were extracted in 1 L deionized water for 1 h after soaking and the leachates caused to reduce root length of alfalfa significantly as the soaking time increased. Crude seeds at 4 g L$L^{-1}$ exudated autotoxins that reduce significantly root length by 34 % compared to the control, when the seeds soaked in deionized water for 24 h. However, the extracts did not affect final germination as well as speed of germination. Extracts from ground seeds significantly reduced speed of germination (GT 50) and root length. The results indicate that release of autotoxic substances from seeds during seed imbibition was increased with increase of soaking time and seed amount, and that autotoxicity was more occurred in ground seeds than in crude seeds.

• 한국전문물리치료학회지
• /
• 제7권1호
• /
• pp.91-100
• /
• 2000

This study investigates the influence of cane length on the weight distribution of the elderly in a standing position. Thirty participants were evaluated using two different cane lengths based on measurements of distal wrist crease to ground (WC cane), and distance of greater trochanter to ground (GT cane). A limloader was used to determine the weight distribution on the subject. It was found that 6.5% of body weight was supported on a GT cane and 7.7% of body weight supported on a WC cane in a standing position. Results suggests that more weight is distributed on a WC cane than a GT cane in the elderly.

• 신재생에너지
• /
• 제5권1호
• /
• pp.40-46
• /
• 2009

Optimization of a rectangular profile annular fin with variable pipe inside radius is presented. This optimum procedure is based on fixed fin height and is made by using variables separation method. The optimum heat loss, corresponding optimum fin length and optimum fin efficiency are presented as a function of pipe inside radius, fin half height, inside fluid convection characteristic number and ambient convection characteristic number. One of results shows that the optimum fin length increases linearly with increase of pipe inside radius for fixed fin height and fin base radius.

• Journal of Plant Biology
• /
• 제14권3호
• /
• pp.29-35
• /
• 1971

Various types of short culm rice mutants were obtained by means of gamma-ray irradiation. In the present paper morphological observation and analysis of silicate content of the mutants are reported. 1. Short culm type had more useful characters than bushy and dwarf types. 2. In short culm and bushy types the number of nodes both above and under ground was similar to the mother varieties, while in dwarf type it decreased. 3. In short culm types the variation of length of above-ground culm and internodes tended to vary relattive to the mother varieties. 4. Positive correlation was found between culm length and the first and fourth internode length in short culm type. 5. Silicate content increased in short culm type-the increment being variety specific.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.608-614
• /
• 2017

얀센메커니즘을 활용한 보행로봇의 단점인 저속을 개선 하기위한 연구이다. 그 예시로 라인트레이싱 속도를 높이기 위한 다리의 최적설계를 수행하였다. 이를 위해 EDISON에서 제공하는 프로그램을 사용하여 Ground angle coefficient와 Ground length를 더한 목적함수를 최대값으로 설계하였고 보행능력이 증가하였다.