• 환경위생공학
• /
• 제12권2호
• /
• pp.43-49
• /
• 1997

Iron and manganese problems in ground water affect far more water systems than almost any other water quality concern. The purpose of this study is to find the optimum condition of ozonation for the removal of dissolved iron, manganese and other organics in the polluted ground water. We proposed 4mg/l, 8mg/l as optimum ozone dose for the removal of $Fe^{2+},{\;}Mn^{2+}$, respectively. The removal efficiencies of $COD_{Mn}$ and $COD_{Cr}$ in ozone dose of 2mg/l - 6mg/l were about 40-50%. The removal efficiency of $NH_{3}-N$ was about 30-40% at pH8.5. In conclusion, it needs further systematic study and research concerned to treatability of $Fe^{2+},{\;}Mn^{2+}$ and biodegradability of organic compounds using Ozonation followed by biological filtration process in ground water treatment train.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.13-20
• /
• 2010

This paper presents the results of a numerical investigation on the ground deformation in deep excavation with emphasis on the groundwater lowering. Using the stress-pore pressure coupled analysis Consideration to the effect of ground excavation and groundwater interaction were carried out and a series of two-dimensional finite element model was employed to perform a parametric study on a wide range of soil profile and initial ground water table condition.

• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.22-29
• /
• 2010

In this study, computational multi-body dynamics and structural vibration analyses including some impact condition have been conducted for the ground flight test system of the developed smart UAV model. Designed ground test system has four degree-of-freedom motions with limited motion control mechanism. Design safety margin designs for several structural components are tested and verified considering expected critical motions (pitching and rolling) of the test smart UAV model. Computational results for various analysis conditions are practically presented in detail. Futhermore, proper design modifications of the initially designed test equipment in order to guarantee or increase structural safety have been successfully conducted in the design stage.

• 한국지열·수열에너지학회논문집
• /
• 제6권1호
• /
• pp.23-28
• /
• 2010

The objective of this study is to develope ground heat exchanger using PHC pile used to building foundation, and it's element technology. So we made PHC piles into ground heat exchanger and evaluate it's performance. First, we studied PHC pile type, heat exchanger pipe, grouting materials, and present apartment house's foundation condition for PHC ground heat exchanger. As a result we designed BIGS(Building Integrated Geothermal System) prototype. Second, we applied BIGS to apartment houses' utility building in Osan built by Daelim. Third, we monitored heating performance of winter season. 1be result of heating performance was so good to apply to heat & cooling system in building.

• 한국지열·수열에너지학회논문집
• /
• 제11권2호
• /
• pp.7-11
• /
• 2015

Recently, as the demand for sustainable energy sources is increasing, ground-source heat pump (GSHP) systems are receiving growing attention. However, the initial cost of GSHP system is higher than it of the conventional systems, especially, in small-size buildings. Therefore, for the application to the small-size building, it is necessary to develop small-size ground heat exchanger with small-size buildings. In this study, analysis of unit-type heat exchanger due to grouting materials. As a result, 1492.14 W of heat exchange rate was acquired in the condition of cement-silica sand-graphite materials.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2242-2246
• /
• 2009

In this paper, a homogeneous dual composite right/left-handed (D-CRLH) transmission line (TL) is proposed by using a defected ground structure (DGS) on the ground plane. In order to satisfy a homogeneity condition of metamaterial, a subwavelength unit cell is designed by way of a spiral DGS and a meander stub. From a dispersion diagram, it is expected that the frequency bands for the left-handed (LH) property is 3.5 - 4.4 GHz. At 3.8 GHz in the LH band, backward propagating phenomenon is observed from full-wave analysis. The experimental results show that the proposed TL has a stop-band in 1.75 - 3.6 GHz.

• 한국항만학회지
• /
• 제10권2호
• /
• pp.69-90
• /
• 1996

This study is related to save the bearing capacity from using Meyerhof formula namely, static mechanics formula with the S.P.T(N value) of the soft ground and is to choose the soft ground improvement method by the using of total load for the proper method of the pile foundation and then to design the most suitable pile foundation to fit the actual circumstance. The purpose of this study is calculating the diameter of the pile foundation by static mechanics formula and introducing the optimum design condition from the result of the bearing capacity for using N value of the S.P.T obtained from the deep soft ground about the piles such as P.H.C pile, pipe and cast-in-place pile of big diameter, etc. As above-mentioned, it is considered that the use of P.H.C pile or pipe pile is advisable on the synthetical investigation and that the selection of cast-in-place pile method is desirable in terms of the constructive safety and durability.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.46-54
• /
• 1995

This paper presents a simple method for measurenemt of roughness of ground surfaces. The present method utilizes fluxes of scattered lights condensed through lenses aligned along the specular direction. A theoretical analysis is preformed for the purpose of investigating the possibility of the method as well as determining the experimental condition. Experiments are also performed to show the effectiveness and robustness of the proposed method. The theoretical and experimental results show that the proposed method is simple enouth to implement and has a potential to identify a wide range of roughness of ground surfaces.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.127-137
• /
• 2018

쇄석다짐말뚝(Gravel Compaction Pile, 이하 GCP)는 느슨한 사질토지반이나 연약한 점토지반에 쇄석을 다지고 압입하여 원지반에 말뚝을 조성함으로써 지반을 개량하는 공법이다. 국내 GCP공법은 많은 연구자들이 실내실험, 현장실험 등을 이용해 GCP 복합지반의 응력거동을 분석하였으나, GCP 복합지반의 상부에 재하되는 매트기초의 강성 차이에 따른 거동분석은 다소 미미한 실정이다. 따라서 본 연구에서는 수치해석을 통해 기초의 강성 차이에 따라 응력분담비를 규명하고자 하였다. 이를 위해 유한요소 해석프로그램인 ABAQUS를 이용하여 치환율을 변화시켜 모델링하고, 강성 차이에 따라 복합지반의 응력분담비와, 침하량 및 최대 수평변위량을 분석하였다. 분석 결과, 강성기초의 하중재하시 응력분담비는 연성기초의 하중재하보다 높게 평가되었으며, 연성하중재하조건에서의 침하량은 강성조건에서 보다 다소 높은 경향이 나타났다. 이는 상부기초의 강성 차이에 대한 응력거동 특성을 명확히 규명해야 할 필요성이 있다고 판단된다. 또한, 최대 수평변위는 강성의 차이에 상관없이 일정한 위치에서 최대 변위가 발생하였다.

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.543-552
• /
• 2014

본 연구에서는 EPB 쉴드 TBM 시공현장에서 얻은 기계데이터와 굴진당시의 지반상태와의 상관관계를 분석하여, 지반상태의 변화에 따른 기계데이터의 변화를 단일 및 복합변수분석을 통하여 규명하였다. 그 결과 경암지반에서 연암지반으로 지반이 변화할 때, 총추력과 커터토크의 비가 증가하는 것을 확인할 수 있다. 총추력대비 커터토크의 비율(커터토크/총추력)을 굴착속도와 쌍대비교하면 경암지반에서의 데이터는 일정한 범위 내에 있음을 확인 할 수 있으며, 연암지반에서는 경암지반일 때와 비교하면 추력대비 커터토크의 비율이 높은 값을 가진다. 이러한 결과를 바탕으로 총추력대비 커터토크의 비율과 굴착속도의 비교를 통해서 연약대 출현의 징후를 감지할 수 있다. 이와 같은 분석결과는 목적변수 커터토크가 설명변수 총추력이 증가할수록, 또 다른 설명변수 지반일축 압축강도가 감소할수록 증가한다는 중회귀분석의 결과를 통해서도 증명된다.