• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.347-360
• /
• 2001

The most expensive spatial operation in spatial databases is a spatial join which computes a combined table of which tuple consists of two tuples of the two tables satisfying a spatial predicate. Although the execution time of sequential processing of a spatial join has been so far considerably improved, the response time is not tolerable because of not meeting the requirements of interactive users. It is usually appropriate to use parallel processing to improve the performance of spatial join processing. However, as the number of processors increases, the efficiency of each processor decreases rapidly because of the disk bottleneck and the overhead of message passing. This paper proposes the method of task allocation to soften the disk bottleneck caused by accessing the shared disk at the same time, and to minimize message passing among processors. In order to evaluate the performance of the proposed method in terms of the number of disk accesses and message passing, we conduct experiments on the two kinds of parallel spatial join algorithms. The experimental tests on the MIMD parallel machine with shared disks show that the proposed semi-dynamic task allocation method outperforms the static and dynamic task allocation methods.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.283-288
• /
• 2009

Purpose: Frey's syndrome is a common complication after parotid surgery and characterized by gustatory sweating and flushing in the periauricular area during meals. Although a variety of methods have been proposed to prevent this postoperative problem but they have been unsatisfactory. In this article, therefore, botulinum toxin A was used to treat nine patients with Frey's syndrome and its duration effect after injection was investigated. Methods: Nine patients became the object of study about the effect of botulinum toxins as treatment of Frey's syndrome. Age of patients ranged from 25 to 78 years (mean, 43.7 years). Six of nine patients had both symptoms of gustatory sweating and flushing. And the others had only gustatory sweating symptom. Using Minor starch iodine test, the affected skin area was detected, and it was marked by $1cm^2$ sized grid appearance. After application of EMLA cream on the gustatory sweating area, botulinum toxin A was injected intracutaneously into the affected skin area ($2.5U/cm^2$). Patients were followed up from six to fifteen months (mean, about 12 months) and asked about improvement of their symptoms. Results: The treatement with botulinum toxin A took effective within two days after injection. Six months after injection, gustatory sweating disappeared completely in all patients, and five of six patients who had gustatory flushing improved in their symptom. Last follow-up, no patients complained of recurrent gustatory sweating and flushing except one. One patient, seven months after initial injection, was retreated with botulinum toxin A because of recurrence, and the result was successful. The duration of the effect after botulinum toxin A treatment was ranged from seven to thirteen months. One patient in our series experienced the upper eyelid weakness as adverse effect, but it improved spontaneously. Conclusion: Local injection of botulinum toxin A is an effective, safe and long - lasting method for treatment of Frey's syndrome. Hereafter, however, additional study will be required to evaluate the duration effect of botulinum toxin A according to frequency in use and dosage.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.614-630
• /
• 2006

Improved estimates of populations at risk for quick and effective response to natural and man-made disasters require spatial disaggregation of zonal population data because of the spatial mismatch problem in areal units between census and impact zones. This paper implements a dasymetric surface model to facilitate spatial disaggregation of the population of a census block group into populations associated with each constituent pixel and evaluates the performance of the surface-based spatial disaggregation model visually and statistically. The surface-based spatial disaggregation model employed geographic information systems (GIS) to enable dasymetric interpolation to be guided by satellite-derived land use and land cover data as additional information about the geographic distributor of population. In the spatial disaggregation, percent cover based empirical sampling and areal weighting techniques were used to objectively determine dasymetric weights for each grid cell. The dasymetric population surface for the Atlanta metropolitan area was generated by the surface-based spatial disaggregation model. The accuracy of the dasymetric population surface was tested on census counts using the root mean square error (RMSE) and an adjusted RMSE. The errors related to each census track and block group were also visualized by percent error maps. Results indicate that the dasymetric population surface provides high-precision estimates of populations as well as the detailed spatial distribution of population within census block groups. The results also demonstrate that the population surface largely tends to overestimate or underestimate population for both the rural and forested and the urban core areas.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.135-139
• /
• 2007

Recently Data Centric Storage (DCS) schemes are variously studied for several applications (e.g. natural environment investigation, military application systems and environmental changes monitoring). In DCS scheme, data is stored at nodes within the network by name. There are several drawbacks in the existing schemes. The first is the inefficiency of the range query processing on not considered the locality of store point. the second is the non-homogeneity of store load of each sensors in case of the sensor distribution density is non-uniformed. In this paper, we propose a novel data centric storage scheme with the sensor distribution density which satisfied with the locality of data store location. This scheme divides whole sensor network area using grid and distributes the density bit map witch consist of the sensor density information of each cell. sensors use the density bit map for storing and searching the data. We evaluate our scheme with existing schemes. As a result, we show improved load balancing and more efficient range query processing than existing schemes in environment which sensors are distributed non-uniform.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.37-45
• /
• 2007

Recently, there has been an increase of the use of ground system for lightning protection called deeply driven grounding electrode. In the case of deeply driven grounding electrode, the rod electrode is equipped perpendicularly and deeply, therefore, it has a benefit to have less restriction of place compared to mesh grid electrode. However, ground impedance is largely changed by the local earth resistivity, so it requires a detailed analysis of the ground structure when planning. The measurement of earth resistivity by existing Wenner's method has been widely used, however, this method can not find out a change in the local ground resistance and it shows the result outwardly to be difficult to estimate exact depth. Therefore, this study analyzed the ground structure as 2-D image using 96 channels measurement facility and tried to analyze change in the local ground resistance and depth of the ground in order to design a deeply driven electrode effectively for lightning protection. It used Wenner alpha method dipole-dipole method and Schlumberger method for 2-D image analysis of the ground resistivity ma based on, it the result was compared with the ground structure analyzed with the result using the CDEGS and Wenner 1-D method.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.45-49
• /
• 2011

The recent trend for numerical experiment requires more higher resolution and accuracy. Generally, in the wave field calculation, it starts with a large region formulation first and follows by a separated detailed region formulation by more denser grids for the main interest area considering the geographical and bathymetrical variation. The wave fields resulted from the large region calculation is being introduced into the detail region calculation as the incident waves. In this process there exists a problem of continuity. In order to get over such problem, method of variable gridding system or spectrum sampling, etc., is being used. However, it seems not enough to examine and analyze the related numerical errors. Therefore, it is investigated in this study the field applicability of the most pervasive use of wave model, the nested SWAN model. For this purpose, we made model experiment for two coastal harbours with different tidal environment, and compared and analyzed the result. From the analysis, it was found that both the extracted values, near the boundaries of the large and detail region and the nested formulation of SWAN model, show almost the same and no different between those with different tidal environment conditions. However it is necessary for reducing the numerical errors to set the boundaries for the detailed region outside of the rapid bathymetric change and deeper region.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.67-80
• /
• 2011

Choropleth mapping of population distribution is based on the assumption that people are uniformly distributed throughout each enumeration unit. Dasymetric mapping technique improves choropleth mapping by refining spatially aggregated data with residential information. Further, pycnophylactic interpolation can upgrade dasymetric mapping by considering population distribution of neighboring areas, while preserving the volumes of original units. This study proposed a combined solution of dasymetric mapping and pycnophylactic interpolation to improve the accuracy of population density distribution. Specifically, the dasymetric method accounts for the spatial distribution of population within each census unit, while pycnophylactic interpolation considers population distribution of neighboring area. This technique is demonstrated with 1990 census data of the Athens, GA. with land use land cover information derived from remotely-sensed imagery for the areal extent of populated areas. The results are evaluated by comparison between original population counts of smaller census units (census block groups) and population counts of the grid map built from larger units (census tracts) aggregated to the same areal units. The estimated populations indicate a satisfactory level of accuracy. Population distribution acquired by the suggested method can be re-aggregated to any type of geographic boundaries such as electoral boundaries, school districts, and even watershed for a variety of applications.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.17-26
• /
• 2015

Firms that have adopted internet technology have been confused by distorted market signals. It is natural to look at marketplace outcomes for guidance, when confronted with a new business phenomenon. However, market signals can be unreliable in the early states of any important new information technology. New technologies trigger rampant experimentation, and the experimentation is often unsustainable. As a result, market behavior is distorted and must be interpreted cautiously. In Chapter 1, we review a concept of business model and roles of strategies in a business model. In Chapter 2, we discuss a strategic auditing method for analyzing market/channel positioning, product/service positioning, value chain/value network positioning and external environmental factors. In chapter 3, we introduces major frameworks for understanding factors forming strategies. The strategic grid model categorizes four quadrants depending on the level of impacts of information technology on operation and strategy. The strategic alignment model presents a new method of assessing an alignment of information technology and business throughout all elements of a business model. In this research, we review the concept of a business model. This research introduces factors that shape strategies and new frameworks for understanding these factors. The research objective of this manuscript is to present a guidance for firms how to use information technology for attaining sustainable competitive advantages.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.2
• /
• pp.17-21
• /
• 2007

The purpose to recognize change of average pixel value of acquisition image by control panel's density and right set up method of speed (sensitivity) and exposure dose(mAs) change that dose in purpose digital flatpanel-detector. X -ray generator DHF-158H2(Hitachi, Japan). Detector CXDI 4OG(Canon, Japan), 12 : 1 grid and exposure ray 135 kVp, 250 mA, 10 ms. focus-detector distance 180 cm and used AEC mode. DICOM reflex analysis program used image J that is digital reflex analysis program that offer in United States America National Health Center(National Institutes of Health : NlH) phantom used chest phantom(Anthromorphic : Flukebrome.medicaI USA). An experiment chest phantom that consist by formation equivalence material use because density value( -3${\sim}$+3) in X-ray control panel and seep that is speed step(slow, medium, fast) each control experimentalize. image analysis reflex neted through an experiment using image j each image compare. These was change in dose according to slow, medium, fast and density's change in an experiment result. According to detector sensitivity and density condition set, dose was relationship dissimilarity 500% from 200%. The dose came highest when is density +3 to slow. and dose more increases gray scale's extent could know that rise. Could know whether how equipment set is important through this experiment. cause of disease which change by digital radiography system forward is thought to increase more, it is considered that suitable education by this and continuous interest about equipment need absolutely.