• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.187-195
• /
• 2018

Buckling-restrained braces (BRBs) are widely used as highly ductile seismic devices, with the first building using BRBs completed in 1989 in Tokyo, and thousands more now in Japan, USA, Taiwan, China, New Zealand and other countries. Although design codes of several countries specify BRB performance criteria, detailed design provisions are not necessarily provided, as BRBs are typically treated as a manufactured device. This paper briefly reviews the early history of BRB research and offers state-of-the-art views on the design criteria required to obtain stable and reliable performance. Representative project examples and up-to-date studies relevant to tall buildings are summarized.

• Journal of Korean Neurosurgical Society
• /
• 제39권2호
• /
• pp.114-119
• /
• 2006

Objective : The authors investigate appropriate evaluation and surgical methods in treatment of the cerebral paragonimiasis accompanying epilepsy. Methods : Thirteen patients with the cerebral paragonimiasis accompanying epilepsy were included for this study. Preoperative evaluation methods included history taking, skin and serologic tests for Paragonimus westermani, neurologic examinations, computerized tomography, magnetic resonance imaging, amytal test, PET or SPECT, and video-EEG monitoring with depth and subdural grid electrodes. Seizure outcome was evaluated according to Engel's classification. Results : Surgical methods were temporal lobectomy including lesions in six, lesionectomy in five, and temporal lobectomy plus lesionectomy in two. Postoperative neurological complications were not noticed, and seizure outcomes were class I in 12 patients [92%], class II in one [8%]. Conclusion : In patients with a cerebral paragonimiasis accompanying epilepsy, further evaluation methods must be done to define the epileptogenic zone, and complete resection of the epileptogenic zone with different surgical methods should be performed for seizure control.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.421-427
• /
• 2016

경상북도 소재 100병상 이상의 3개 종합병원 응급실에 설치된 일반촬영장비와 CT장비에 대한 세균 오염도 검사를 실시하여 감염관리에 대한 기초자료를 제공하고 관리방안을 제안하고자하였다. 2015년 12월 1일부터 12월 31일까지 이루어졌으며 경상북도 소재 응급실내의 일반촬영장비와 CT장비를 대상으로 하였다. 일반촬영장비는 업무종사자가 가장 많이 사용하는 control box 위, 노출 버튼 위, 환자의 피부 접촉 부위인 테이블 위 전체와 stand bucky의 grid 위 및 턱 올려놓은 곳 등 총 4곳을 수집하였다. CT장비는 촬영실 업무종사자가 가장 많이 사용하는 control box위와 X-선 노출 버튼, 환자의 피부 접촉 부위인 환자 테이블 위 전체, gantry inner 등 총 3곳을 수집하였다. 영상의학과 응급실내 일반촬영장비에서 검출된 표면 오염 균주는 Providencia stuartii(25%), Stenotrophomonas maltophilia(18%), Enterobacter cloacae(8%), Pseudomonas species(8%), Staphylococcus epidermidis(8%), Gram negative bacilli(8%), incubator에서 48시간 배양 후 자라지 않은 세균은 25%를 차지하였다. 또한 영상의학과 응급실 내 CT장비의 검출된 표면 오염 균주는 Stenotrophomonas maltophilia(11%), Enteococcus faecalis(11%), Escherichia coli(11%), incubator에서 48시간 배양 후 자라지 않은 세균은 67%로 대부분이었다. 영상의학과 일반촬영장치의 Stand bucky-grid와 Stand bucky 상연에서 대부분의 세균이 발견되었고, CT장비의 검체 수집 부분 중 Patient table에 집중되어 검출되었다. 이는 여러 질환을 갖고 있는 환자에 의해 오염된 것을 의미하며 균주 모두 면역력이 저하된 환자에게는 치명적인 질환을 일으킬 수 있다. 그러므로 검사 전후 70% 알코올 소독을 통해 감염예방을 하여야 한다.

• 한국항공우주학회지
• /
• 제42권7호
• /
• pp.535-543
• /
• 2014

비세장형, 둥근 앞전을 가지고 스팬이 1.0m로 축소된 BWB형 UCAV에 대해 완전난류, 천이 모델을 사용하여 전산해석을 수행하였다. 자유류는 받음각 -4도부터 26도까지 50m/s이며, 평균 시위 기준 레이놀즈수는 $1.25{\times}10^6$이다. 멀티블록 6면체 격자와 함께 완전난류 모델과 천이 모델의 결과를 비교하여 천이효과가 공력 특성에 미치는 영향을 살펴보았다. 풍동 실험과 비교한 결과 양/항력 계수는 해석범위 내에서 잘 일치하였으며, 피칭 모멘트는 높은 받음각에서 작게 예측됨과 동시에 난류모델에 따라 결과가 크게 달라졌다. 압력분포와 skin friction line, 축 방향 속도장을 이용하여 와류구조의 거동과 천이현상이 미치는 영향을 살펴본 결과, 천이효과를 고려하는 것이 UCAV의 정확한 와류 구조와 공력특성 예측에 필요한 것으로 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.687-690
• /
• 2002

Multimode boundary-layer transition on a NACA0012 airfoil is experimentally investigated under periodically passing wakes and the moderate level of free-stream turbulence. The periodic wakes are generated by rotating circular cylinders clockwise or counterclockwise around the airfoil. The free-stream turbulence is produced by a grid upstream of the rotating cylinder, and its intensity(Tu) at the leading edge of the airfoil is $0.5\;or\;3.5\;{\%}$. The Reynolds number ($Re_c$) based on chord length (C) of the alrfoil is $2.0{\times}10^5$, and Strouhal number ($St_c$) of the passing wake is about 0.7. Time- and phase-averaged streamwise mean velocities and turbulence fluctuations are measured with a single hot-wire probe, and especially, the corresponding wall skin friction is evaluated using a computational Preston tube method. The wake-passing orientation changes pressure distribution on the airfoil in a different manner irrespective of the free-stream turbulence. Regardless of free-stream turbulence level, turbulent patches for the receding wakes propagate more rapidly than those for the approaching wake because adverse pressure gradient becomes larger. The patch under the high free-stream turbulence ($Tu=3.5{\%}$) grows more greatly in laminar-like regions compared with that under the low background turbulence ($Tu=0.5{\%}$) in laminar regions. The former, however, does not greatly change the original turbulence level in the very near-wall region while the latter does it. At further downstream, the former interacts vigorously with high environmental turbulence inside the pre-existing transitional boundary layer and gradually lose his identification, whereas the latter keep growing in the laminar boundary layer. The calmed region is more clearly observed under the lower free-stream turbulence level and for the receding wakes. The calmed region delays the breakdown further downstream and stabilizes more the boundary layer.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.921-928
• /
• 2006

Wake-induced boundary-layer transition on a NACA0012 airfoil with zero angle of attack is experimentally investigated in periodically passing wakes under the moderate level of free-stream turbulence. The periodic wakes are generated by rotating circular cylinders clockwise or counterclockwise around the airfoil. The free-stream turbulence is produced by a grid upstream of the rotating cylinder, and its intensities $(Tu_{\infty})$ at the leading edge of the airfoil are 0.5 and 3.5%, respectively. The Reynolds number (Rec) based on chord length (C) of the airfoil is $2.0{\times}10^5$, and Strouhal number (Stc) of the passing wake is about 1.4. Time- and phase-averaged streamwise mean velocities and turbulence fluctuations are measured with a single hot-wire probe, and especially, the corresponding wall skin friction is evaluated using a computational Preston tube method. The patch under the high free-stream turbulence $(Tu_{\infty}=3.5%)$ grows more greatly in laminar-like regions compared with that under the low turbulence $(Tu_{\infty}=0.5%)$ in laminar regions. The former, however, does not greatly change the turbulence level in very near-wall region while the latter does it. At further downstream, the former interacts vigorously with high environmental turbulence inside the pre-existing transitional boundary layer and gradually loses its identification, whereas the latter keeps growing in the laminar boundary layer. The calmed region is more clearly observed under the lower free-stream turbulence level and with the receding wakes.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.13-20
• /
• 1999

This study is to calculate the exposed radiation dose using Bit method, NDD calculation method and monogram method without dosimeter. In addition, we can calculate the radiation dose from x-ray film density as a film badge. The authors examined the entrance skin dose from $2{\sim}3$ intercostal chest x-ray film density. We also studied the relationship between film density and equivalent dose in the each screen film system under the different radiation quality and the poor geometry condition of grid ratio. As results, we established the deductive method to define the entrance skindose from chest x-ray film density. The error range was found in the range $-13%{\sim}+l7%$ for between deductive entrance skindose and the $2{\sim}3$ intercostal chest x-ray film density to actual detective radiation dose with dosimeter.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1268-1277
• /
• 2018

A relatively high operating frequency is required for efficient wireless power transfer (WPT). However, the alternating current (AC) resistance of coils increases sharply with operating frequency, which possibly degrades overall efficiency. Hence, the evaluation of coil AC resistance is critical in selecting operating frequency to achieve good efficiency. For a Litz wire coil, AC resistance is attributed to the magnetic field, which leads to the skin effect, the proximity effect, and the corresponding conductive resistance and inductive resistance in the coil. A numerical calculation method based on the Biot-Savart law is proposed to calculate magnetic field strength over strands in Litz wire planar spiral coils to evaluate their AC resistance. An optimized frequency can be found to achieve the maximum efficiency of a WPT system based on the predicted resistance. Sample coils are manufactured to verify the resistance analysis method. A prototype WPT system is set up to conduct the experiments. The experiments show that the proposed method can accurately predict the AC resistance of Litz wire planar spiral coils and the optimized operating frequency for maximum efficiency.

• 교육시설 논문지
• /
• 제22권6호
• /
• pp.13-22
• /
• 2015

The purpose of this study is to analyze the 'Sant'Elia Nursery School' constructed in 1937 at Como, Italy. Giuseppe Terragni(1904-1943) is, as it well known, one of the representative architects in the period of Italian rationalism architecture. In particular, his 'Casa del Fascio(1928~1936)' is evaluated as a representative work of this period. The research is based on the original drawings and letters, mostly produced by G. Terragni himself. Through the analyze on the design process, the research tries to reveal Terragni's design method and strategy, especially in the educational facility project. There are at least four deferent phases in the Terragni's design process; in each phase, there are fundamental changes such as a structural grid system, relationships between skin and columns or spatial sequences. Establishment of a new guideline on the educational facility in 1925 is also an another important issue. There was a political need, during the period of Mussolini's regime, to find a model of educational facilities. So, this project reflects not only the Terragni's design process but also the good example of educational facility in the early Twenty Century in Europe.

• 한국실내디자인학회논문집
• /
• 제6호
• /
• pp.53-62
• /
• 1995

This research aims at proving the fact that the forms, spaces and many other design concepts of Modernism are much related with the changes of materials, struc-tures, and the way of construction as well as the idealis-tic and aesthestic things through the history of steel, one of the most important materials of the style. The meaning steel has in the modern architecture can be studied in the structure and industrial production system. 1) Steel frame broadened the range of understanding the space and created the new form through the skeleton/skin structure by reinterpreting the existing space fac-tors while it was being adopted to the architecture. Walls could be freed from the traditional function of bear-ing wall and roofs gave the transparancy to the interior by being linked with the glass. Posts lost the function which confines the space in the frame of the grid system and gave the flexibility to the interior due to the economical materials. These changes made the movable partition, screen with various materials and the system furniture which divides the space more important. 2) In the aspect of the industrialized architecture, it be-came the moment that the most of the archtectural com-posing parts were in mass production as they were standarized, high qualified, and generalized by the indus-trial characteristics of steel, and the specialization of structure and cladding, but the neither of the efforts to make the building itself by mass production or to standarize it was fulfilled. The high-tech architecture which borrows its archtectural manifestation from the high technology, however, is consistently paying efforts on such industrialization.