• 연구논문집
• /
• s.27
• /
• pp.15-34
• /
• 1997

The 3-dimensional unsteady compressible flows around the high speed train have been simulated for the train entering a tunnel and for passing another train. The simulation method employs the implicit approximation-factorization finite difference algorithm for the inviscid Euler equations in general curvilinear coordinates. A moving grid scheme is applied in order to resolve the train movement relative to the tunnel and the other train. The velo-city and pressure fields and pressure drag are calculated to study the effects of tunnel and the other train. The side directional force which is time dependent is also computed for the passing train. Pressure distribution shows that the compression wave is generated in front of the train noise just after the tunnel entrance and proceeds along the inside of tunnel.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.324-327
• /
• 2002

For the characterization of arbitrary shaped printed circuit board, lossy transmission line grid model based on SPICE netlist and analytical plane model based on the segmentation method are proposed in this paper. Two methods are compared with an arbitrary shaped power/ground plane. Furthermore, design considerations for the complete power distribution network structure are discussed to ensure the maximum value of the PDN impedance is low enough across the desired frequency range and to guide decoupling capacitor selection.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.22-25
• /
• 2006

Direct simulations of aerodynamic sound, especially sound emitted by rapidly rotating elliptic cylinder by the finite difference lattice Boltzmann method (FDLBM). Effect of pile-fabrics for noise reduction is also studied by the finite volume LBM (FVLBM) using an unstructured grid. Second order time integration and third order upwind scheme are shown to be enough for these simulations. Sound sources are detected to be doublets for both cases. For the elliptic cylinder, the doublet is generated in the interaction between the vortex and the edge. For the circular cylinders, they are generated synchronizing with the Karman vortex street, and it is also shown that the pile-fabrics covering the surface of the cylinder reduces the strength of the source.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.147-151
• /
• 2010

We have developed a high-$T_c$ SQUID magnetocardiogram (MCG) system for small laboratory animals. White noise of the measurement system was about 30 fT/$Hz^{1/2}$ when measured in a magnetically shielded room. We optimized the measurement position to obtain clear MCG wave from rat's small heart by using grid measurements. With the optimization, the MCG signal was successfully detected with the peak amplitude of about 30 pT. We could observe well defined P-, QRS-, and T-waves from the rat MCG. The results suggest that the developed system has a strong potential to monitor the progress of the heart disease model by using a laboratory rat.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.442-448
• /
• 2014

For the first time, a novel analytical model of the net gain for a Raman-EDFA hybrid optical amplifier (HOA) is proposed and its various parameters optimized using a genetic algorithm. Our method has been shown to be robust in the simultaneous analysis of multiple parameters (Raman length, EDFA length, and pump powers) to obtain large gain. The optimized HOA is further investigated at the system level for the scenario of a 50-channel DWDM system with 0.2-nm channel spacing. With an optimized HOA, a flat gain of >17 dB is obtained over the effective ITU-T wavelength grid with a variation of less than 1.5 dB, without using any gain-flattening technique. The obtained noise figure is also the lowest value ever reported for a Raman-EDFA HOA at reduced channel spacing.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.49.2-49.2
• /
• 2013

We present a result of $^{13}CO$(1-0) survey toward the Outer Galactic Plane using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory(TRAO). Our target region is from l=$120^{\circ}$ to $133^{\circ}$ and b=$-1^{\circ}$ to $+1^{\circ}$, and some extended regions are included where emission is still arising. All data are on 50" grid. Velocity resolution is 0.63 km/sec, and the total velocity range is from -150 km/sec to 100 km/sec. A total of 140,000 spectra were obtained. The rms noise is about 0.18 K per channel for unsmoothed raw data. We will present a few initial results of the survey database.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1981-1986
• /
• 2004

A cross-flow fan relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice and blades have a forward curved shape. Therefore, the performance of a cross-flow fan is influenced 25% by the impeller, 60% by the rearguider and the stabilizer, 15% by the heat exchanger. At the low flow rate, there exists a rapid pressure head reduction, a noise increase and an unsteady flow against a stabilizer and a rearguider. Moreover, it is difficult to analyze the reciprocal relations of the cross-flow fan because each parameter is independent. Numerical analyses are conducted with different starting angles of the rearguider. Two-dimensional, unsteady governing equations are solved, using FVM, PISO algorithm, sliding grid system and ${\kappa}-{\varepsilon}$ standard turbulence model.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.361-365
• /
• 2009

We describe a simple method to obtain an optical sectioning in a conventional wide-field microscope by projecting a single spatial frequency grid pattern onto the object. Using a patterned beam, we have measured the height of BGA with a rough surface that provide the coherence noise. The configuration of the height measurement system using pattern beam is simple. The image acquired by this system is not depend on the coherence noises. This system is also applicable to the sample reference plan that has no pattern on ground. The reappearance and accuracy are outstanding and applicable to many industrial optical metrology.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1161-1165
• /
• 2004

The fundamental digital control of utility-connected PV inverter are presented with detailed analysis and simulation and experimental results. PLL controller using virtual two phase detector, current controller of DC-DC converter, dc link voltage controller and inverter current controller are discussed. The novel PLL controller using virtual two phase detector can detect the information of utility voltage instantaneously and is not sensitive to the noise. Current controller of DC-DC converter, dc link voltage controller and inverter current controller are the conventional methods. We have constructed utility-Connected PV Inverter and applied to those controllers. The simulation and experimental results demonstrate an excellent performance in the single-phase grid-connected operation.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.216-217
• /
• 2016

본 논문에서는 Common Mode Noise가 저감된 계통연계형 단상인버터에서 파워 소자의 도통손실을 줄일 수 있는 방법을 제안한다. 제안하는 방법은 단상인버터의 (+)양의 구간과 (-)음의 구간의 전류 회생모드 시 MOSFET 소자를 turn-on 시키는 동기 정류 방식을 사용하여 손실을 저감한다. 제안한 방법의 효용성을 PSIM 모의해석을 통하여 입증 하였다.