• Journal of Communications and Networks
• /
• v.17 no.6
• /
• pp.647-655
• /
• 2015

Low-power and lossy networks (LLNs) comprised of thousands of embedded networking devices can be used in a variety of applications, such as smart grid automated metering infrastructures (AMIs) and wireless sensor networks. Connecting these LLNs to the Internet has even greater potential, leading to the emerging concept of the Internet of Things (IoT). With the goal of integrating LLNs into IoT, the IETF has recently standardized RPL and 6LoWPAN to allow the use of IPv6 on LLNs. Although there already exist several studies on the the performance of RPL and embedded IPv6 stack in LLN, performance measurement and characterization of TCP over RPL in multihop LLNs is yet to be studied. In this article, we present a comprehensive experimental study on the performance of TCP over RPL in an embedded IPv6-based LLN running over a 30-node multihop IEEE 802.15.4 testbed network. Our results and findings are aimed at investigating how embedded TCP interoperates with common Linux TCP and underlying RPL (and vice versa), which furthers our understanding of the performance trade-offs when choosing TCP over RPL in IPv6-based LLNs.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.419-428
• /
• 2013

The modular multilevel cascade converter (MMCC) is a new family of multilevel power converters with modular realization and a cascaded pattern for submodules. The MMCC family can be classified by basic configurations and submodule types. One member of this family, the Hexverter, is configured as Double-Delta Full-Bridge (DDFB). It is a novel multilevel AC/AC converter with direct power conversion and comparatively fewer required components. It is appropriate for connecting two three-phase systems with different frequencies and driving an AC motor directly from a utility grid. This paper presents the dq model of a Hexverter with both of its AC systems by state-space representation, which then simplifies the continuous time-varying model into a periodic discrete time-invariant one. Then a generalized multivariable optimal control strategy for regulating the Hexverter's independent currents is developed. The resulting control structure can be adapted to other MMCCs and is flexible enough to include other control criterion while guaranteeing the original controller performance. The modeling method and control design are verified by simulation results.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.172-178
• /
• 2022

In this paper, water meter AMR(automatic meter reading), one of the core technologies of smart water grid, using LoRa IoT network is studied. The main content of the research is to develop the network system and show the test results that one PC server receives the readings of water meters from multiple households through LoRa communication and stores them in the database, and at the same time sends the data to the web server database through internet. The system also allows users to monitor the meter readings using their smartphones. The hardware and firmware of the main board of the digital water meter are developed. For a PC server program, MDMS(meter data management system) is developed using Visual C#. The app program running on the user's smartphone is also developed using Android Studio. By connecting each developed parts, the total network system is mounted on a flow test bench in the laboratory and tested. For the fields test, 5 places around the university are selected and the transmission distances are tested. The test result show that the developed system can be applied into the real field. The developed system can be expanded to various social safety nets such as monitoring the living alone or elderly with dementia.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.86-91
• /
• 2014

In the field of shipbuilding and marine, electrical power system is that each of the distributed bus bars is connected electrically. In this way, it would be appropriate to recognize as grid-connecting rather than the redundant bus. Short-circuit capacity of the electric power system will be increased proportionally which is due to the addition of the bus. The increase of short-circuit capacity needs high initial cost associated with equipment and can generate the blackout when the equipment with a physically connected to the bus occurs the electric failure. In order to solve these problems, marine electrical power system in which current limiting reactor has been applied is classified according to the network topology, bus network, star network and ring network. And short circuit analysis for each network is performed by the fault types. The results are presented pros and cons compared to each other.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.3
• /
• pp.202-208
• /
• 2015

For a prototype turbine operating under part load conditions, the turbine output is fluctuating strongly, leading to the power station incapable of connecting to the grid. The field test of the prototype turbine shows that the main reason is the resonance between the draft tube vortex frequency and the generator natural vibration frequency. In order to reduce the fluctuation of power output, different measures including the air admission, water admission and adding flow deflectors in the draft tube are put forward. CFD method is adopted to simulate the three-dimensional unsteady flow in the Francis turbine, to calculate pressure fluctuations in draft tube under three schemes and to compare with the field test result of the prototype turbine. Calculation results show that all the three measures can reduce the pressure pulsation amplitude in the draft tube. The method of water supply and adding flow deflector both can effectively change the frequency and avoid resonance, thus solving the output fluctuation problem. However, the method of air admission could not change the pressure fluctuation frequency.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.107-114
• /
• 2011

Because of boost of communications devices furnishing diverse services and rapid expansion of mobile business, good use and management of the existing network system become very important. Also, offering service corresponding with user communication requirement grades which vary widely in each person, is vital for communication service provider. In this paper, SGOSST, a mechanism of efficient network construction with minimum cost for network QoS is proposed. In experiments, though spending 252.97% more execution times, our SGOSST QoS network consumed 5.11% less connecting costs than the network constructed by weighted minimum spanning tree method. Therefore our mechanism can work well for efficient operation and service providing in the network formed with users and communication devices of various service requirement grade as smart/mobile equipment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.7-7
• /
• 2009

Lead telluride (PbTe) is a very promising thermoelectric material due to its narrow band gap (0.31 eV at 300 K), face-centered cubic structure and large average excitonic Bohr radius (46 nm) allowing for strong quantum confinement within a large range of size. In this work, we present the thermoelectric properties of individual single-crystalline PbTe nanowires grown by a vapor transport method. A combination of electron beam lithography and a lift-off process was utilized to fabricate inner micron-scaled Cr (5 nm)/Au (130 nm) electrodes of Rn (resistance of a near electrode), Rf (resistance of a far electrode) and a microheater connecting a PbTe nanowire on the grid of points. A plasma etching system was used to remove an oxide layer from the outer surface of the nanowires before the deposition of inner electrodes. The carrier concentration of the nanowire was estimated to be as high as $3.5{\times}10^{19}\;cm^{-3}$. The Seebeck coefficient of an individual PbTe nanowire with a radius of 68 nm was measured to be $S=-72{\mu}V/K$ at room temperature, which is about three times that of bulk PbTe at the same carrier concentration. Our results suggest that PbTe nanowires can be used for high-efficiency thermoelectric devices.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1034-1035
• /
• 2015

Watertight 25.8 kV/600 A/12.5 kA fault current limiters (FCLs) have successfully installed in five areas (Incheon, Seoul, Gyeong-gi, Daejeon, Suwon) on KEPCO power distribution line for the purpose of commercial demonstrations. The fault current limiting operation of this FCL, which includes functions of sensing, commutation, and reduction of fault currents, is perfectly completed within 1 cycle immediately after fault occurs. The performance of FCL was verified by short circuit test, impedance test, insulation test, temperature-rise test, and control test, etc at PT&T in LS industrial systems, which is the official certification institute in Korea. In 2013, and also the FCL field test was performed in order to test the protection coordination between conventional relays and FCL, on the 1.5 kA and 5.0 kA faults, which were made by connecting the Artificial Fault Generator (AFG) to the distribution line in test grid at KEPCO Power Testing Center. The next step of this project is to check the FCL conditions caused by real external environment, and acquire the various data from five regions installed with FCL. In this paper, we intend to explain the FCL specifications and performance characteristics, and check the expected effect by application of FCL to power distribution line based on the power system analysis of an application site.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.365-372
• /
• 2014

In this paper, We implement a power-saving and efficient measures in buildings using the smart-meter. In order to save electric power energy, We propose an improved automatic power-factor controller(APFC) and demand control measures. This is achieved by controlling directly circuit breakers and the capacitor bank feeders in real time via a two-way smart-meter's ICT skills. Improved APFC is minimizing installation costs by series-parallel connecting heterologous capacitors to form a more diverse capacitor banking and controlling using the smart-meter. In order to suppress the demand power, We have designed a smart-meter with communication functions using Atmel's AVR465 and tested an operated lodging building for 24-hours. As a result, We made sure to always retained more than 95% power factor and did not occur over compensation.