• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.46-53
• /
• 2018

This study was conducted to determine which greenhouse provided good environmental conditions for strawberry production, and performed better at conserving energy. Temperature, RH, VPD, $CO_2$, solar radiation, yield, and fuel consumption were the parameters analyzed. The temperatures of both greenhouses were well controlled in order to provide optimal day and night temperatures for strawberry production. The air inflated double layer greenhouse had higher RH values (more than 90% at night), which led to higher disease occurrence, in comparison to the conventional double layer greenhouse. Furthermore, the air inflated double layer greenhouse had lower VPD values than the conventional double layer greenhouse. Therefore, better RH and VPD were observed in the conventional double layer greenhouse. Higher $CO_2$ concentration was observed in the air inflated double layer greenhouse while the conventional double layer greenhouse ventilated better than the air inflated greenhouse, because of its side ventilators. Moreover, higher solar radiation in the conventional double layer greenhouse resulted in higher yield, in comparison to the air inflated double layer greenhouse. Thus, we can conclude that the conventional double layer greenhouse provided a better environment for crop growth, in comparison to the air inflated double layer greenhouse. Regarding fuel consumption, the air inflated double layer greenhouse had lower fuel consumption than the conventional double layer greenhouse. Therefore, from an energy consumption point of view, we can conclude that the air inflated double layer greenhouse performed better than the conventional double layer greenhouse.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2018

In this study, eleven major coastal areas were selected and the climate environment and the greenhouse direction were analyzed. This research investigates the greenhouse heat loss according to the wind environment at target areas. The target areas were selected based on heated greenhouse cultivation area and wind environment standard. Temperature, wind speed, and wind direction among weather data for 30 years were collected and analyzed. The data were divided into the minimum, average, and maximum temperatures and the Meteorological Agency criteria applied to the weather and wind direction criteria. Data were collected in the range of $0{\sim}180^{\circ}$ considering the symmetry of the shape of the greenhouse. In addition, the wind direction is different for each region and the applied wind direction can be different when referring to the longitudinal direction of the greenhouse and the data are collected in the range of $0{\sim}90^{\circ}$. The results of this study are expected to be used to calculate the heating load of greenhouse installed in places wind speed high.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.183-190
• /
• 2017

Recently the scale and area of greenhouse cultivation have been enlarged in Korea, and its importance in domestic agriculture is being increased. According to these situation, environment control systems are widely used in greenhouses. Even though development of greenhouse facilities and control devices, cultivation skill using them is in lower level more than european countries and Japan. In this study, we propose intelligent information system based on information-communication technology that supports environment control systems. Proposed system is able to support to maintain optimal environment for plant growth using data from environment control system, and also give useful knowledge for cultivation by active way. Furthermore, it estimates future status of plant growth, and suggest best strategy of environment control for current stage.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.15-21
• /
• 2007

The purpose of this study is to provide the basic data for passive control and energy conservation strategies of multipurpose greenhouse. Passive design strategies which are appropriate to Jeju environmental circumstance were applied in the multipurpose greenhouse. The field measurement were conducted to examine relationship of micro climate and indoor thermal environment in the multipurpose greenhouse. The result of this study can be summarized as follow ; (1) The indoor temperature was ranged from 5 to $21^{\circ}C$ without a heating system, when the exterior temperature was -1 to $19^{\circ}C$. (2) The multi-purpose greenhouse requires almost no heating energy in winter, when it is used as a greenhouse, an exhibition hall or a cafeteria.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.39-46
• /
• 2014

Purpose: Monitoring and control of environmental condition is highly important for optimum control of the conditions, especially in greenhouses and plant factories, and the condition is not uniform within the facility. Objectives of the study were to investigate variability in soil water content and to provide information useful for better irrigation control. Methods: Experiments were conducted in a strawberry-growing greenhouse (greenhouse 1) and a cherry tomato-growing greenhouse (greenhouse 2) in winter. Soil water content, electrical conductivity (EC), and temperature were measured over the entire area, at different distances from an irrigation pump, and on ridge and furrow areas. Results: When measured over the entire greenhouse area, soil water content decreased and temperature and electrical conductivity increased over time from morning to afternoon after irrigation. Water content decreased by distance from the irrigation pump up to 70 m and increased after that, and temperature showed an inverse pattern. Soil water contents on the ridge were lower than those on the furrow, and the differences were 10.2~18.4%, indicating considerable variability. The lowest EC were observed on the furrow and highest values were observed on the ridge. Soil water contents were less and temperature levels were greater at the window side than in the center locations. Conclusions: Selection of number and location of soil water content sensor would be the first step for better water content monitoring and irrigation control. Results of the study would provide basic data useful for optimum sensor location and control for underground greenhouse environment.

• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.21-32
• /
• 2012

Fluorinated compounds mainly used in the semiconductor industry are potent greenhouse gases. Recently, thermal plasma gas scrubbers have been gradually replacing conventional burn-wet type gas scrubbers which are based on the combustion of fossil fuels because high conversion efficiency and control of byproduct generation are achievable in chemically reactive high temperature thermal plasma. Chemical equilibrium composition at high temperature and numerical analysis on a complex thermal flow in the thermal plasma decomposition system are used to predict the process of thermal decomposition of fluorinated gas. In order to increase economic feasibility of the thermal plasma decomposition process, increase of thermal efficiency of the plasma torch and enhancement of gas mixing between the thermal plasma jet and waste gas are discussed. In addition, noble thermal plasma systems to be applied in the thermal plasma gas treatment are introduced in the present paper.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.174-180
• /
• 2014

Standard weather data available to greenhouse environmental design are limited in most regions of the country. So, instead of using standard weather data, in order to find the method to build design weather data for greenhouse heating and cooling, design outdoor weather conditions were analyzed and compared by TAC method and frequency analysis using climatological normal and thirty years from 1981 to 2010 hourly weather data provided by KMA and standard weather data provided by KSES. Average TAC values of outdoor temperature, relative humidity and insolation using thirty years hourly weather data showed a good agreement with them using standard weather data. Therefore, in regions which are not available standard weather data, we suggest that design outdoor weather conditions should be analyzed using thirty years hourly weather data. Average of TAC values derived from every year hourly weather data during the whole period can be established as environmental design standards, and also minimum and maximum of them can be used as reference data.

• Clean Technology
• /
• v.2 no.2
• /
• pp.150-164
• /
• 1996

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2015

Irrigation control plays an important role in improving productivity of paprika which is very sensitive to moisture condition. Among environmental factors, light intensity and distribution are not easily controlled and showed a big difference depending on season and region. For adequate irrigation control, therefore, transpiration and irrigation amounts considering light environmental data should be estimated. In current study, modified transpiration model was used for more precise estimation of transpiration. Seasonal transpiration and irrigation amounts at different regions were compared by using light environmental data provided from Korea Meteorological Administration. The transpiration amount in summer was rather smaller than those in spring and autumn seasons in Korea due to large deviations in light intensity as well as rainy period in summer. Irrigation system capacities at various regions could be recommended by using the transpiration amount in the spring having the longest photoperiod in the year. These results will be useful to the design of irrigation system and optimization of input energy in greenhouse.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1998

A Hardware system of hybrid environmental control was developed for using it in the multi-greenhouse. Now, an on/off control system is most utilized in protected cultivation, but a hybrid environmental control system is not yet. This system consists of a hardware to be devided by physical elements and a software for the hardware a personal computer, a hybrid environmental control and a communication Program for modules. The hardware was made of several independent modules with independent CPU. Each module was made to slots. which are very convenient to mount and take off. Also, they are managed easily to repair, add, remove, and change of their function and expansion. The software for a personal computer was a menu driven program written in visual basic within a Windows environment for easy applications by a user. The hybrid environmental control software have operating factors operate continuously with temperature, humidity and others in greenhouse. Communication programs were used both 485 communication method for long distance communication between modules and CRC communication method for making easy to program, and less errors between personal computer and modules.