• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.121-130
• /
• 1995

Greenhouse and laboratory studies were conducted to investigate allelopathic potential of some weed species on alfalfa(Medicago sativa L.) germination and seedling growth. In the comparison between top(leaves+stems) and root extracts, top extract exhibited greater allelopathic effects on alfalfa germination than that of root. The various weed species extract differently responded to alfalfa test species, WL-320, in terms of allelopathic effect. Top and root aqueous extracts of lambsquarter(Chenopodium album L.), giant foxtail(Setaria faberii Herrm.), redroot pigweed (Amaranthus retroflexus L.), velvetleaf(Abutilon theophrasti Medic.), crabgrass(Digitaria sanguinalis L.), canada thistle(Cirsium arvense L.) and prostrate knotweed(Polygonium aviculare L.) significantly inhibited germination, seedling length, weight, vigor, and rate of germination of alfalfa. The regression slopes of various top extracts showed that velvetleaf(b=3.69) extracts were the most inhibitory, while large crabgrass(b=2.39) extracts had the least allelopathic effect on alfalfa germination. Germination, seedling length and weight of alfalfa were inversely proportional to the concentration of dried velvetleaf extracts. Also, more of the toxic effects were observed from the dried extracts compared to the fresh extracts. Residue of velvetleaf inhibited significantly alfalfa emergence and survival percentage compared to the control. The emergence and survival percentage of alfalfa were 44%, 57% at 1.0% residue treatment, respectively. When weed residues were mixed with silica sand with incubation time, velvetleaf residue most inhibited alfalfa growth. The degree of inhibition increased as incubation time increased. An incubation for 72h caused the greatest inhibition of alfalfa growth. These results demonstrate the different allelopathic activity of weed species extracts on alfalfa and suggest that weed may affect alfalfa growth and development through the inhibitory effects of allelochemicals present in weed tissue.

• Journal of Climate Change Research
• /
• v.2 no.3
• /
• pp.175-189
• /
• 2011

In this research, we describe the methodology and the quantification about GHG reduction effects, expected by optimization of operation mode according to establishing additional heat storage system of Bundang Combined Cycle Power Plant. As an intermediate form of General Combined Cycle Power Plant and Heat supply only district heating plant, Bundang Combined Cycle Power Plant(and Ilsan, Anyang, Bucheon) is possible to satisfy demand for the electrical load and thermal load capacity at the same time through changes to the operation mode itself. Therefore, through the operating transition of high-efficiency mode that the condenser cooling water is recovered and supplied to district heat and cooling, establishing additional heat storage system have flexible supply ability at the power and heat market. In this research, We calculated using the operating performance for the last three years(2008~2010) and efficiency of each mode-specific values. As a result, GHG reduction effects were calculated as $97.95kg_{-}CO_2/Gcal$ per heat energy 1 Gcal supplied at the heat storage system and we expected emmision reduction effect about $13,500Ton_{-}CO_2/yr$.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.497-502
• /
• 2014

The conversion reaction of methane and carbon dioxide at an atmospheric pressure plasma reactor filled with Ni-$Al_2O_3$ and Ni-$MgAl_2O_4$ catalyst was performed. Effects of various process parameters such as the applied electric power, reaction gas flow rate, reactor temperature, mixing ratio of reactants and the presence of the catalyst on the reaction between methane and carbon dioxide were analyzed. From the analysis of the contribution of the catalyst in the reaction step, even if the temperature raised to $400^{\circ}C$, there was no spontaneous catalytic conversion of methane and carbon dioxide without plasma discharges. When the catalysts for the conversion of methane and carbon dioxide would be adopted to the plasma reactor, the careful selection of suitable catalysts and process parameters should be essential.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.188-195
• /
• 2014

This study was carried to investigate the effect of illite addition on the growth, bioactive components and volatile compounds of leaf on Saururus chinensis Baill cultivation in greenhouse. Illite addition on Saururus chinensis Baill cultivation resulted no significant effects on the aerial part. However, the root part was highest in 5% illite addition group. Crude oil and ash amount increased as illite additives was increased. Ca of inorganics and free sugars contents were highest in 5% and 20% illite addition, respectively. Hyperoside and isoquercetin of available component on leaf were highest in 5% illite addition group, 4.02mg/g and 4.31mg/g, respectively. The volatile compounds in Saururus chinensis Baill leaf cultured with illite addition amounts were isolated by solid-phase microextraction fiber (polydimethysiloxane $65{\mu}m$) and identifed by gas chromatogtaphy mass spectrometry. As the results, the 22 volatile compounds were identified from in Saururus chinensis Baill leaf and major volatile compounds were the ${\alpha}$-cadinol (18.50%), myristicin (16.46%), methyl-9-methyl-tetradecanoate (10.22%), and ${\gamma}$-muurolene (9.75%). Especially, the content of ${\alpha}$-cadinol was highest in 5% illite addition group and ${\gamma}$-muurolene on overall illite addition group was lower than no addition group.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.185-191
• /
• 2012

This study was performed to screen fallow crops during winter period for improvement of soil quality and utilizing as mulching material in watermelon cropping system during winter period. Five fallow crops, mainly, hairy vetch, barley, rye, oat and wheat, were sown in early November. They were mowed for covering the soil surface instead of polyethylene (PE) film before watermelon planting in early April the following year. The highest absorbed nutrients and dry matter yield were found in rye. Bulk density in plots with fallow crop was lower than control plot. There was observed no significant differences among the fallow crops. However, porosity was the lowest in control plot. Soil EC reduced to 12%, 13%, 14%, 16% and 22%, respectively, by cultivation of hairy vetch, oat, wheat, barley and rye. Microbial biomass carbon and dehydrogenase activities were higher in soil treated with gramineous crops, such as barley, rye and oat. The growth of watermelon was more affected by regeneration of fallow crop than the occurrence of weed, especially in plots treated with rye or oat. Also, the fruit damage by aphid was found severe in these treatment plots. The fruit yield in plots treated with hairy vetch and barley was increased 5.7% and 2.6%, respectively, compared to that of PE films. The present experiment findings implied that these fallow crops had significant beneficial effects on improvement of soil qualities and could be utilized for mulching materials in watermelon cropping system.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.931-938
• /
• 2012

The effects were investigated of different lengths and numbers of slitwalls in drainless containers on growth and change in soil moisture volumes on the growth of Diffenbachia amoena 'Marianne' and Begonia rex. Drainless containers filled with amended soil, with square shape ($240mm{\times}240mm$) were used, as well as three different sets of slitwalls (2, 4 or 8, respectively) in addition to non-slitwall containers. Two indoor foliage plants were grown in slitwall containers in randomized blocks with 3 replications in greenhouse conditions, from March to September, 2009. Soil moisture volumes per container were measured by weighing containers every 2 hours during the day. The change in soil moisture volumes showed considerable differences among slitwalls tested in comparison to control containers before and after twice-weekly irrigation. Particularly, the differences in the S2 (195mm, slitwall 2) containers were significantly greater than other containers tested. For Diffenbachia amoena 'Marianne', plant height, length of leaf, dry weight and fresh weight were higher with S2 containers than with those grown in other containers tested. The Begonia rex with the best quality in terms of plant height, length of leaf and width of leaf was grown in S8 (360mm, slitwall 8) containers. Particularly, statistical analysis has indicated that shoot fresh weights of Begonia rex grown in S8 were 3-fold higher than those grown in CS8 containers. The different results obtained within the two species led us to hypothesize a species-specific influence on indoor foliage plant performance. However, plants of both species grown in slitwall containers showed good results compared with plants grown in non-slitwall containers.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.335-341
• /
• 2014

Faced with global agenda of greenhouse abatement program including regulations and $CO_2$ emission trading scheme, shipping companies are enforced to a high level of efficiency in fuel consumption. Accordingly shipbuilding companies worldwide are required to develop fuel-efficient ships which otherwise traditionally consume a great amount of fossil fuels. In this dissertation, relevant to the improvement of fuel efficiency for commercial ships, design methodology through the numerical simulations are intensively described. This work consists of derivation of effective hydrodynamic design practice based on the application of longitudinal grooves to effectively improve the pressure distribution around ship hull. The primary objective of the present study is to improve ship resistance performance using longitudinal grooves which originate from long strips on the abdomen of humpback whale. Several groove shapes have been extensively investigated and the proposed shape efficiently controlled the variation of pressure distributions acting on the hull surface.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.349-355
• /
• 2015

Lisianthus (Eustoma grandiflorum) is relatively sensitive to temperature and light conditions. For year round production of good quality potted plants and energy saving, it is necessary to understand the growth and flowering response to the combined conditions of these environmental factors. This study was conducted to examine the growth and flowering responses to temperature, photoperiod, and light intensity during the post-seedling stage. 'El Paso Deep Blue' lisianthus plants with four true leaf pairs were grown in growth chambers maintained at average daily temperatures (ADT) of 14, 20, and $26^{\circ}C$ and provided with three photosynthetic photon fluxes [PPF; 100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$] for 8 (08:00-16:00) and 16 hours (08:00-24:00) by fluorescent and incandescent lamps, resulting in four daily light integrals (DLI): about 3, 6 (two photoperiods), 12 (two photoperiods), and $24mol{\cdot}m^{-2}{\cdot}d^{-1}$. After treatment for three weeks followed by growth for one week in a greenhouse of $20{\pm}3^{\circ}C$, growth and development were measured. Higher temperature, higher PPF, and longer photoperiod promoted plant growth and flowering; however the impacts of PPF and photoperiod were smaller than those of temperature. As ADT and DLI increased, the number of leaves, number of flowers, lateral shoot length, and shoot dry weight increased. An increase of about $1mol{\cdot}m^{-2}{\cdot}d^{-1}$ DLI could constitute an increase of 0.40 to $0.76^{\circ}C$ ADT depending on these crop characteristics when ADT and DLI are above $20^{\circ}C$ and $12mol{\cdot}m^{-2}{\cdot}d^{-1}$, respectively. Therefore, growers can select a regimen of heating or supplemental lighting without delaying harvesting time or decreasing crop quality.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.52-61
• /
• 1998

Nitrification and denitrification are important processes in the landfill site as they are deeply related with degradation and stabilization of refuse. Also nitrous oxide ($N_2O$) which is released from both nitrification and denitrification is known as greenhouse gas (GHG). The purpose of this study was to clarify the process by which $N_2O$ produced using $^{15}N$ isotope. Nitrate which was labeled to 10.08% with $^{15}KNO_3$ was used and $N_2O$ was analyzed with GC mass. Results was that even also when $O_2$ of bulk was 15%, $N_2O$ was released from denitrification. And as concentrations of $O_2$ increase, sum of $N_2O$ was released from denitrification. And as concentrations of $O_2$ increase, sum of $N_2O$ and $N_2$ was decreased and ratios of $N_2O$ in the reduced gases were increased. FISH technics also adaped to confirm whether which of nitrifiers existed in the substrates. When NEU was used of which the target was ammonia oxidizing bacteria, nitrifier was not detected at all. So it was confirmed that during the reaction denitrification was dominant process. Total bacteria distributions which were detected by EUB probe explained that as $O_2$ increase the number of bacteria also increase, but between the 10-15% of $O_2$ there was no any differences.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.228-236
• /
• 2011

Since most Green House Gases (GHGs) and air pollutants are generated from the same sources, it will be cost-effective to develop a GHGs reduction plan in combination with simultaneous removal of air pollutants. However, effects on air pollutants reduction according to implementing any GHG abatement plans have been rarely studied. Reflecting simultaneous removal of air pollutants along with the GHGs emission reduction, this study investigated relative cost effectiveness among GHGs reduction action plans in Busan Metropolitan City. We employed the Data Envelopment Analysis (DEA), a methodology that evaluates relative efficiency of decision-making units (DMUs) producing multiple outputs with multiple inputs, for the investigation. Assigning each GHGs reduction action plan to a DMU, implementation cost of each GHGs reduction action plan to an input, and reduction potential of GHGs and air pollutants by each GHGs reduction action plan to an output, we calculated efficiency scores for each GHGs reduction action plan. When the simultaneous removal of air pollutants with the GHGs reduction were considered, green house supply-insulation improvement and intelligent transportation system (ITS) projects had high efficiency scores for cost-positive action plans. For cost-negative action plans, green start network formation and running, and daily car use control program had high efficiency scores. When only the GHGs reduction was considered, project priority orders based on efficiency scores were somewhat different from those when both the removal of air pollutants and GHGs reduction were considered at the same time. The expected action plan priority difference is attributed to great difference of air pollutants reduction potential according to types of energy sources to be reduced.