• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.466-475
• /
• 2011

This study purposed to analyze the spatial pattern and the amount of carbon emission at the deforestation area based on the administrative and GIS data. The total size of deforestation area in last nine years (2000-2008) was about 649 ha, and it was occurred annually about 72 ha. The occurrence rate of deforestation per administrative area in Wonju was about 0.74%. It was 0.34% higher than that of Kwangwondo, and 0.06% less than that of National rate. On the other hand, the forms of deforestation by purpose were not related to the administrative district unit. The number of deforestation forms was highest at settlements. second most frequent form is other land. Grassland showed the lowest score. In addition, the deforestations were more occurred which is closed to the existing housing and building rather than roads. The number of deforestation was 1.2 times higher based on 300m. Seventy percent of deforestation was occurred which is less than 0.5 ha in size, and it increased to 91% when the size is less than 1ha. The total size of theoretical carbon emission based on deforestation area was estimated at 23,424 tc, and average annual carbon emission was estimated by 2,603 tc. Carbon emission per ha was 36.1 tC/ha. This study results will be useful to construct the greenhouse gas statistical verification system against the Post-2012 by GIS.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.37-48
• /
• 2024

Wastewater treatment plants (WWTPs) are obligated to reduce carbon emissions as a part of public sector greenhouse gas (GHG) emission reduction targets. However, Sewage Statistics(2022) shows that CO₂ emissions per wastewater treatment volumes have decreased by only 3.03 % compared to 2020, which is far from enough to meet the Nationally Determined Contribution (NDC) targets. This study aimed to find operational conditions of biological reactors that minimize total carbon footprint (CFP). Total CFP considers both direct emissions from biological processes and indirect emissions from energy consumption. A study was conducted using a computer simulation program which is called as EQPS for a 4-stage BNR WWTP. The results showed that total CFP was reduced by 10.97% compared to the design condition when the mixed liquor recirculation (MLR) was set to 100 % of the influent flow. The N₂O emission factor (EF) of the target WWTP was calculated to be 0.138-0.199 %, which is significantly lower than the IPCC default value of 1.6 %. This study proposes a method to minimize total CFP in WWTPs by optimizing biological reactor operation and emphasizes the need for further research on N₂O emission reduction.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.247-261
• /
• 2014

In this study, it investigates the highly controversial issue "low carbon car subsidy". Through the policy's intent, purpose, and necessity, it aims to present alternatives for automotive industry development. Introducing the low carbon car subsidy will bring a huge change to the vehicle purchase practices by changing vehicle purchase cost. It expects that this change will reduce greenhouse gas emission from vehicles. For successful settlement of the system, it shall set up the target sections for subsidy and levy appropriately in order to get the nation's consensus. Additionally, it has to conduct sufficient reviews the measures such as adjustment to the existing auto tax, divided payments of burden charge, etc before enforcing the system. In terms of the automobile industry, it must do their level best in technical development in order to meet the carbon dioxide emission level of imported cars until the enforcement. Also, the government has to strengthen its support to the industry.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.4
• /
• pp.53-64
• /
• 2017

The equations and emission factors for estimating national GHGs are developed based on IPCC guidelines. The GHGs on livestock sector has been calculated using methodologies following 1996 IPCC guideline in South Korea although 2006 IPCC guideline was announced in 2006. The purpose of this study is to understand the implications of guideline updates for national GHGs changes in the livestock sector and analyze the effect of regional major livestock characteristics using KOSTAT time series data (1990 ~ 2014). The results show a new guideline makes GHGs reduce in the livestock sector up to 11 % with subdivided emission factors and the livestock characteristics affect regional GHGs. Gyeonggi-do, the top emitter among 16 states, records 784 thousand tons $CO_2eq.$ and Daejeon has the highest potential (82 %) of GHGs reduction. Swine is the most contributor for regional GHGs except Seoul and Gwangju, but the share of GHGs for chickens is less than 12 % in spite of the largest livestock population (87 %).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.205-210
• /
• 2012

For environmental reasons and because of our limited energy resources, high-efficiency power generation technology will be necessary in the future. Ultra-supercritical (USC) power generation technology is the key to managing the greenhouse gas problems and energy resource problems discussed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Other countries and manufacturers are trying to build commercial power plants. In this paper, an efficient method of achieving near-zero emission operation of a high-efficiency fossil power plant using USC power generation is discussed. Development of USC power generation in Korea has been supported by the Korean government in two phases: Phase I was USC key technology development from 2002 to 2008, and Phase II is USC development and technology optimization from 2010 to 2017.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.981-986
• /
• 2015

As the seriousness of global environment pollution is gaining increasing public attention, research into greenhouse gas emissions of ships is being carried out globally. At a domestic level, however, in a number of significant fields such research has not been conducted to date. This study examined countermeasures for the reduction of $CO_2$ emission in the fields of electronic control engines, trim optimization, propeller polishing, hull cleaning, and anti-fouling paint using an actual sea-going vessel. Selected countermeasures were applied during sea trials of the ship and the effect of specific fuel oil consumption analyzed. It was found that each countermeasure resulted in a decrease of fuel consumption of 1~5%. The energy efficiency operational indicator (EEOI) was calculated and found to also be improved by 1~5%. Further research into the EEOI of domestic shipping is planned to enhance conformance with international environmental regulations and improve global competitiveness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1022-1028
• /
• 2005

The objectives of this study were to evaluate and compare the environmental load of two different concentrate feed supply systems to the Japanese domestic livestock industry using the Life-cycle Assessment (LCA) method. The current system was defined as that requiring 11.469 million tons of corn imported from the US by sea transport and supplied as concentrate feed to the Japanese domestic livestock industry. The new system proposed by Kaku et al. in 2004 was defined as where 802,830 tons of US imported corn would not be planted in US and would be replaced by barley planted in 278 thousand ha of Japanese domestic land left fallow for the past year. In this case, 909,000 tons of domestic harvest barley would have been supplied as concentrate feed to the Japanese domestic livestock industry in 2000. The activities taken into account within the two system boundaries were three stages: concentrate feed production, feed transportation and gas emission from the soil by chemical fertilizer. Finished compost was regarded as organic fertilizer and was put instead of chemical fertilizers within the system boundary. Adoption of this new concentrate feed supply system by the Japanese domestic livestock industry could reduce 78,462 tons $CO_2$-equivalents of global warming potential, 347 tons $SO_2$-equivalents of acidification potential, 54 tons $PO_4$-equivalents of eutrophication potential and 0.842 million GJ as energy consumption below 2,000 levels. This LCA study comparing two Japanese domestic livestock concentrate feed supply systems showed that the stage of feed transport contributed most to global warming and the stage of emission from the soil contributed most to acidification and eutrophication. The Japanese domestic livestock industry could participate in emissions trading with $CO_2$-equivalents reduced by shifting from some imported US corn as a concentrate feed to domestic barley planted in land left fallow. In that case the Japanese government could launch emissions trading in accordance with Kyoto Protocol in the future.

• Journal of Korean Society on Water Environment
• /
• v.33 no.3
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.399-406
• /
• 2012

One-third of total energy and 50% of $CO_2$ emissions arise from construction phase. Because of this global amount of energy consumption and $CO_2$ emission, we must do our best to solve this problem. But our existing ways of meeting this problem has focused on the energy consumption saving of the construction and dwelling stage. On the other hand, we has been treated too lightly for handling the $CO_2$ emissions problem during the maintenance management and the demolition process so far,. In this paper, we quantitatively predicted and evaluated the environmental load in each construction step during all life cycle. And, we developed the environmental load assessment program for each construction step. And we proposed the reliable decision support model for objective and reliable environmental load assessment and reduction. This result must help the development of construction technology and low carbon & green growth.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.3-9
• /
• 2012

The exhaustion of fuel and tremendous greenhouse gas emissions are caused by the sharp increase in the use of fossil fuel. Especially, accounting for over 25% of carbon dioxide emissions, Construction is main environmental problem. So, in this study, we applied network analysis in the selection of spoil-bank to reinforce the GIS to decrease carbon dioxide emissions in construction sites. As a result, we could calculate the expected carbon dioxide emission and transportation cost of the proposed sites by the shortest distance and the least amount of time. We found that if spoil-bank is chosen based on the result, carbon dioxide emissions will be decreased as much as we plant a pine tree. We can also decrease largely by considering and applying complex causes which affect carbon dioxide emissions in construction.