• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2017

Intersection signal's phase time is calculated and determined by car and pedestrian traffic volume. If signal phase time and traffic volume dis-matched, cars and pedestrians have much delay time. This paper suggested an All-Red phase application method that cars and pedestrians securing safety and minimizing traffic signal waiting time. The key solution of this suggested method is determining All-Red phase operation by using sum of spare green time that have no passing cars. That is, total time of spare green time that have no passing cars is longer than All-Red phase time, operating All-Red phase has an effect. And case study carried out at the signalized intersection, revealed that this suggested method has much effectiveness.

• Industrial Engineering and Management Systems
• /
• v.14 no.3
• /
• pp.248-274
• /
• 2015

This study discusses a contract to promote collection and recycling of used products in a green supply chain (GSC). A collection incentive contract is combined with a reward-penalty contract. The collection incentive contract for used products is made between a retailer and a manufacturer. The reward-penalty contract for recycling used products is made between a manufacturer and an external institution. A retailer pays an incentive for collecting used products from customers and delivers them to a manufacturer with a product order quantity under uncertainty in product demand. A manufacturer remanufactures products using recyclable parts with acceptable quality levels and covers a part of the retailer's incentive from the recycled parts by sharing the reward from an external institution. Product demand information is assumed as (i) the distribution is known (ii) mean and variance are known. Besides, the optimal decisions for product quantity, collection incentive of used products and lower limit of quality level for recyclable parts under decentralized integrated GSCs. The analysis numerically investigates how (1) contract for recycling activity, (ii) product demand information and (iii) quality of recyclable parts affect the optimal operation for each GSC. Supply chain coordination to shift IGSC is discussed by adopting Nash Bargaining solution.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.502-510
• /
• 2007

The present study is to estimate the effect of diffracted wave fields inside a harbor, around harbor entrance and outer breakwater, when a navigation channel is dredged in the vicinity of the a harbor entrance. The wave field of the problem is considered to be two-dimensional plane and the configuration of the submarine pit on the sea bed is designated by a single rectangular type. The numerical simulation is performed by using the solution of the Greet function based on the boundary integral equation. The results of this study is illustrated by applying the normal incidence and partially reflecting boundaries.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.151-154
• /
• 2007

To build up the green roofs, it must not adverse effect to durability and structural safety. That is conducted by safety system which consist of waterproofing to form basically, root barrier to protect the waterproofing. The reason why root barrier form is to protect the penetration force of root growth and the root could penetrate concrete surface, move inward so far. It may cause shorten the life span on concrete structure. For this problem, government constantly demand the solution to form the root barrier for waterproofing and concrete structure before the building is service. However, the technical action is not fully prepared. Therefore, in this study, we would like to suggest the workability and suitability of the copper plate to solve not only the side of waterproofing but also root barrier for green roof system and exhibit the mechanism for root penetration resistance and corrosion resistance.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.559-565
• /
• 2005

As the wave impinges on and overtops the structure, a large highly aerated region is created in front of the structure and water splashs on top of the structure. The broken wave in front of the structure and associated green water on top of the structure are highly aerated containing not only a large number of bubbles but also very large sizes of bubbles. In this paper, the velocity field of the highly aerated region and the splashing water on the top is measured using a modified PIV method incorporating the traditional PIV method with the shadowgraphy technigue by correlating the ' texture ' of the bubble images. The velocity fields of a plunging wave impacting on a structure in a two-dimensional wave flume is measured. It is found that the maximum fluid particle velocity in flout of the structure during the impinging process is about 1.5 times the phase speed of the wave, while the maximum horizontal velocity above the top is less than the phase speed, It is also found that the dam breaking solution does not work well in predicting the green water velocity.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.272-278
• /
• 2013

Extract of ginger has been evaluated as a green inhibitor for the corrosion of steel in sulfide polluted NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. Potentiodynamic polarization measurements showed that this extract acts as a mixed type inhibitor but mainly inhibits the cathodic reaction. The inhibition efficiency was found to increase with inhibitor concentration reaching to approximately 83.9% using 250 ppm of ginger. Nyquist plots show a single capacitive loop in uninhibited and inhibited solutions. From EFM the causality factors are very close to theoretical values which indicate that the measured data are of good quality. The adsorption process of the studied extract on steel surface obeys Temkin adsorption isotherm. The results obtained from the different electrochemical techniques were in good agreement which prove the validity of these tools in measurement of corrosion rate. Ginger extract has no effect on Escherichia Coli and can be applied safely on waste water treatment plants.

• Journal of Hydrogen and New Energy
• /
• v.27 no.1
• /
• pp.71-82
• /
• 2016

A fuel cell electric vehicle (FCEV) could be an alternative solution to gasoline powered vehicles. The Korean and Japanese governments have played the midwifery role in the development of the FCEV industry. This study explores the difference in policy goals for FCEV between the two countries. Koreans recognized that FCEV was innovative technology and put forward the notion of technology pre-occupancy. Whereas, the Japanese government discovered that FCEV was one way to apply hydrogen mechanisms, so they identified the supply of hydrogen as one of the industries of interest, and have played the demiurge role. This study suggests that the role of government is to introduce eco-friendly vehicles, using the cases of Korean and Japanese governments, who introduced FCEV to the world first.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.129-147
• /
• 2014

This study proposes an optimal operational policy for a green supply chain (GSC) where a retailer pays an incentive for collection of used products from customers and determines the optimal order quantity of a single product under uncertainty in product demand. A manufacturer produces the optimal order quantity of product using recyclable parts with acceptable quality levels and covers a part of the retailer's incentive from the recycled parts. Here, two scenarios for the product demand are assumed as: the distribution of product demand is known, and only both mean and variance are known. This paper develops mathematical models to find how order quantity, collection incentive of used products and lower limit of quality level for recycling affect the expected profits of each member and the whole supply chain under both a decentralized GSC (DGSC) and an integrated GSC (IGSC). The analysis numerically compares the results under DGSC with those under IGSC for each scenario of product demand. Also, the effect of the quality of the recyclable parts on the optimal decisions is shown. Moreover, supply chain coordination to shift the optimal decisions of IGSC is discussed based on: I) profit ratio, II) Nash bargaining solution, and III) Combination of (I) and (II).

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.