• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.635-638
• /
• 2002

In $ABCO_4$ and $ABC_3O_7$ (A=Ca, Sr; B=Y, Rare earth; C=Al, Ga), random distribution of static crystalline fields in activator sites results in inhomogeneous broadening of spectral lines of luminescent materials. In this study, we investigated luminescent properties of above-mentioned materials by excitation and emission spectra. In result, both $ABCO_4$:Tb and $ABC_3O_7$:Tb phosphors emit the green light. $ABC_3O_7$:Tb phosphors absorbed shorter wavelength energy than $ABCO_4$ phosphors so that the emission efficiencies of $ABC_3O_7$:Tb phosphors were higher than those of $ABCO_4$:Tb phosphors under vacuum UV.

• Journal of ILASS-Korea
• /
• v.14 no.2
• /
• pp.49-58
• /
• 2009

Non-edible vegetable oils instead of edible vegetable oils as a substitute for diesel fuel are getting a renewed attention because of global reduction of green house gases and concerns for long-term food and energy security. Out of various non-edible vegetable oils, karanja, mahua, linseed, rubber seed and cotton seed oils are selected in this study. A brief review of recent works related to the application of the above five vegetable oils and its derivatives in CI engines is presented. The production technologies of biodiesel based on non-edible vegetable oils are introduced. Problems in vegetable oil or biodiesel fuelled CI engine are included. In addition, future works related to spray characteristics of non-edible vegetable oil or biodiesel from it are discussed. The biodiesel fuel, irrespective of the feedstock used, results in a decrease in the emission of hydrocardon (HC), carbon monoxide (CO), particulate matter (PM) and sulphur dioxide ($SO_2$). It is also said to be carbon neutral as it contributes no net carbon dioxide to the atmosphere. Only oxides of nitrogen (NOx) are reported to increase which is due to oxygen content in the biodiesel fuel. The systematic assessment of spray char-acteristics of neat vegetable oils and its blends, neat biodiesel and its blends f3r use as diesel engine fuels is required.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.997-999
• /
• 1999

We fabricated white light-emitting organic electroluminescent device which have a mixed single emitting layer containing poly(N-vinylcarbazole)[PVK], tris(8-hydroxyquinoline)aluminum[Alq3] and poly(3-hexylthiophene)[P3HT] and investigated the emission properties of it. We expect to obtain a blue light from PVK, green light from Alq3 and red light from P3HT The fabricated device emits white light over 18V with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to $Alq_3$ and P3HT resulted in decreasing the blue light intensity from PVK. With mixing of N, N'-diphenyl-N, N'-(3-methylphenyl)-[1,1'-biphenyl]-4, 4'-diamine[TPD], hole transport material, to the emitting layer, the luminance intensity of device was increased 50 times than that of the device which not contain TPD. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.79-84
• /
• 1999

the photolithographic patterning on an indium-tin oxide (ITO) glass and the electro-phoretic deposition were combined for preparing the screen of the full-color field emission display(FED). the patterns with a pixel of 400$\mu\textrm{m}$ on the ITO-glass were made by etching the ITO with well-prepared etchant consisting of HCL, H2O, and HNO3. Electrophoretic method was carried out in order to deposit each spherical red (R), green(G), and blue (B) phosphor on the patterned ITO-glass. The process parameters such as bias voltage, salt concentration, and deposition time were optimized to achieve clear boundaries. It was found that the etching process of ITO combined with electrophoretic method was cost-effective, provided distinct pattern, and even reduced process steps compared with conventional processes. The application of reverse bias to the dormant electrodes while depositing the phosphors on the stripe pattern was found to be very critical for preventing the cross-contamination of each phosphor in a pixel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.156-156
• /
• 2011

Nanocrystalline $Ca_2Gd_8Si_6O_{26}$ (CGS) : $Sm^{3+}$ and CGS : $Tb^{3+}/Sm^{3+}$ phosphors were prepared by solvothermal reaction method for light emitting diode (LED) and field emission display (FED) applications. The XRD patterns of these phosphors confirmed their oxyapatite structure in the hexagonal lattice. The visible luminescence properties of these phosphors were investigated by exciting with ultraviolet (UV) or near-UV light and low voltage electron beam. The photoluminescence (PL) properties of $Ca_2Gd_8Si_6O_{26}$ (CGS) : $Sm^{3+}$ and CGS : $Tb^{3+}/Sm^{3+}$ phosphors were investigated as a function of $Sm^{3+}$ concentration. Cathodoluminescence (CL) properties were examined by changing the acceleration voltage. The CGS : $Sm^{3+}$ showed the dominant orange emission due to the $^4G_{5/2}{\rightarrow}^6H_{7/2}$ transition. The CGS : $Tb^{3+}/Sm^{3+}$ phosphor showed the green, white and orange emissions when excited with 275, 378, and 405 nm wavelengths, respectively. The chromaticity coordinates of these phosphors were comparable to or better than those of standard phosphors for LED or FED devices.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.949-953
• /
• 2003

Blue emitting CaWO$_4$ thin films were deposited by rf magnetron sputtering. The effect of sputtering parameters and annealing conditions on the luminescent properties were investigated. Structural and stoichiometric properties of thin films were affected by $O_2$/Ar gas ratio and substrate temperature. Post-annealing caused the phosphor thin films to emit improved luminescent properties. The atomic composition of films might depend on annealing atmosphere, which resulted in the changes of luminescent properties. Blue-green emission that was due to oxygen vacancies was observed. However, by controlling oxygen defects, only blue emission could be obtained.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3206-3210
• /
• 2013

This study focused on the matrix interference for the qualitative and quantitative analysis of inorganic arsenic species in seaweed by ion chromatography (IC) combined with inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The matrix of seaweed has a significant effect on the determination of inorganic arsenic species. In particular, the retention times of inorganic arsenic species in the in the standard solution were different from those in seaweed because of the matrix interference. Thus, it was not suitable to use the chromatographic method for the determination of the arsenic species in seaweed. We investigated an alternative method for the determination of inorganic arsenic species in seaweed. The method was applied for the seaweed samples such as laver, green laver, sea tangle and sea mustard. The sample extraction methods of the arsenic species were also investigated in this study.

• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.413-420
• /
• 2020

Lu₃Al_5-xGa_xO₁₂:Ce³⁺,Cr³⁺ powders are prepared using a solid-state reaction method. To determine the crystal structure, Rietveld refinement is performed. The results indicate that Ga³⁺ ions preferentially occupied tetrahedral rather than octahedral sites. The lattice constant linearly increases, obeying Vegard's law, despite the strong preference of Ga³⁺ for the tetrahedral sites. Increasing x led to a blue-shift of the Ce³⁺ emission band in the green region and a change in the emission intensity. Persistent luminescence is observed from the powders prepared with x = 2-3, occurring through a trapping and detrapping process between Ce³⁺ and Cr³⁺ ions. The longest persistent luminescence is achieved for x = 2; its lifetime is at least 30 min. The findings are explained using crystal structure refinement, crystal field splitting, optical band gap, and electron trapping mechanism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.239-244
• /
• 2007

Highly efficient and stable white PIN OLED structures have been developed with a focus on possible AM display applications. Due to the use of the novel air-stable Novaled n-dopant material NDN26, the mass production compatibility of the PIN approach is improved. With both a conventional n-dopant, NDN1, and a novel air-stable n-dopant, NDN26, similar performance in efficiency and lifetime are reached. Based on highly a stable red fluorescent emitter system, the Novaled PIN approach allows for reaching ultra-long lifetimes of 1,000,000 hours at a brightness of $1,000\;cd/m^2$, both for top and for bottom emission layouts. Furthermore, inverted PIN structures for a possible use in a-Si backplane applications for AM displays are shown. With a phosphorescent green emitter system it could be demonstrated that for bottom and inverted as well as non-inverted top emission, a brightness of $1,000\;cd/m^2$ can be reached at below 3 V. In addition to low operating voltages and long lifetimes, PIN OLEDs also enable for device structures with extremely low operating voltage drifts, a feature of increasing importance for future AM display developments.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.3
• /
• pp.12-18
• /
• 2012

The purpose of this study is to make an economic analysis(Life cycle cost) of selecting optimal air conditioning system for a research building which is 8 stories with a total floor area of $32,010m^2$. Energy consumptions of three proposed air-conditioning systems(Alt-1,2,3) that reflect the government green-growth policy are calculated and compared. The results show that life cycle cost of Alt-3(Ventilation DX AHU+EHP) is less than Alt-1(EHP+ventilation DX AHU) by 5.1%, and Alt-2(Absorption chiller/heater+EHP) by 34.3%. Annual energy consumption of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 37.4%. Annual $CO_2$ emission of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 0.2%.