• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.261-272
• /
• 2023

This research concentrates on the potential explosion hazards that could arise from unforeseen accidents in the rapidly proliferating hydrogen refueling stations and Energy Storage System(ESS) facilities. It underscores the pivotal role of structural protection technology in alleviating such risks. The research contributes primary data for the formulation of structure protection design by assessing the impact resistance across various reinforcement techniques used in cement composites. The experimental results elucidate that reinforced concrete, serving as the quintessential structural material, exhibits a 20% advancement in impact resistance in comparison to its non-reinforced counterpart. In situations typified by rapid loads, such as those seen with high-velocity impacts, the reinforcement of the matrix with fibers is demonstrably more beneficial than local reinforcement. These insights accentuate the importance of judiciously choosing the reinforcement method to augment impact resistance in structural design.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.6
• /
• pp.27-37
• /
• 2019

This study focused on the possibility of reducing the cooling load through the change of micro climate in the outdoor space during summer season. This study proposes an efficient planning model by comparing the effects of urban heat island mitigation through wind path planning, outdoor space vegetation, and exterior material change by using the basic model of the street-oriented block housing proposed in the previous research by the same author. As a result, the most effective wind path planning strategy in the street-oriented block housing was the change of the air flow through the mass height adjustment. When the tall building masses were staggered and arranged in a balanced manner, the overall wind environment could be improved. The greater the height difference between low and high masses, the better the air flow was shown. It was also important to arrange the building masses so that the inlet of the main wind was open and to allow the external space to connect to the adjacent block to create a continuous flow. The change of outdoor space vegetation and flooring, and the formation of wind paths through the opening of lower part also showed the effect of heat island reduction. In addition, the change of PMV in summer was the biggest influence of shadow by tall building mass. Attention should be paid to the fact that high-albedo exterior materials are adversely affected by multiple reflections in dense street-oriented block housing. The use of albedo of the exterior material showed that it is necessary to pay attention to apply in the high density block housing. This is attributed to the rise of the temperature due to the absorption of energy into the low-albedo flooring, where the high-albedo exterior causes multiple reflections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1589-1597
• /
• 2014

For several decades, economic growth has achieved in the aspect of productivity and effectiveness not environmental friendly. As a result, global warming is a major agenda to solve. Therefore, global effort to sustainable development has been adopted like UNFCCC and Kyoto protocol that aimed to reduce greenhouse gas. However, the construction industry has only focused on applying techniques for using less energy sources not monitoring sustainable construction and development. Therefore, this study developed a tool for monitoring greenhouse gas emissions in construction industry. The proposed system evaluates and estimates BAU (Business as usual) for each phase of a construction project. For this purpose, analyzed the greenhouse gas emission factors coincide to life cycle of a construction project. The scope of monitoring is determined according to data availability and emission factor. Then, the system framework is developed and the calculation logic is proposed the system features provide comparison between the emission estimates for eco-friendly design and the actual emission of construction and operation phases. The system would be utilized as a tool for supporting to green construction realization and green construction performance evaluation.

• Bulletin of the Korea Photovoltaic Society
• /
• v.6 no.1
• /
• pp.56-68
• /
• 2020

Cameroon is a lower middle-income country with a population of 25.87 million inhabitants distributed over a surface area of 475,442 ㎢. Cameroon has very rich potentials in renewable energy resources such as solar energy, wind energy, small hydropower, geothermal energy and biomass. However, renewable energy constitutes less than 0.1% of energy mix of the country. The energy generation mix of Cameroon is dominated by large hydropower and thermal power. Cameroon ratified the Paris Agreement in July 2016 with an ambitious 20% greenhouse gas (GHG) emission reduction. This study attempts to investigate some renewable energy deployment policy-instruments that could enable the country enhance renewable energy deployment, gain energy independence, fulfill Nationally Determined Contribution (NDC) and achieve Sustainable Development Goals. It begins with an analysis of the status of energy sector in Cameroon. It further highlights the importance of renewable energy in mitigating climate change by decarbonizing the energy mix of the country to fulfill NDC and SDGs. Moreover, this study proposes some renewable energy deployment policy-solutions to the government. Solar energy is the most feasible renewable energy source in Cameroon. Feed-in Tariffs (FiT), is the best renewable energy support policy for Cameroon. Finally, this study concludes with some recommendations such as the necessity of building an Energy Storage System as well a renewable energy information and statistics infrastructure.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.8 no.2
• /
• pp.40-50
• /
• 2009

The toilet in school building is one of most crucial elements for the recent changing face in school design, but the number of toilets and urinals in most school may not be sufficient to meet current needs, especially in the girl's toilet rooms. This study aims to suggest a guideline in designing the toilet in school buildings and propose the optimum area and development of models. The survey for this study is conducted through questionnaires collected and research from 9 schools in Seoul. The results of this study, it is suggested that the number of toilet facilities in school buildings be required by ratio of 0.5 toilets per a class and 1.1 urinal per a class for boy. In case of girls, it is suggested that ratio of 1.6 toilets per a class. Based on the result, it also propose various unit plans for each class block with space such as rest zone, green zone, powder zone etc.

• Journal of KIBIM
• /
• v.11 no.1
• /
• pp.31-38
• /
• 2021

The design principles of new urbanism (NU) have been adopted for new towns-in town projects for inner city neighborhoods in Seoul, Korea Since 2000. Here, ten NU principles were matched to four urban design categories: streets, land use, housing and buildings, and public open spaces. These elements were analyzed for Eunpyung New Town project. Through the case, the applications and implications NU principles are explored. The principles of connectivity, quality architecture and urban design, increased density, green transportation, sustainability, and quality of life were positively and successively adopted for streets, land use, housing and buildings, and public open spaces. The principles of mixed-use and diversity and traditional neighborhood structure were only partially applied in land use, housing and buildings, and public open spaces. It should be note that the walkability principle is intended not for job-housing proximity, but for pedestrian-friendly street design.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.387-394
• /
• 2016

Commercial 28 algae removal technologies that have been applied in domestic rivers and lakes with green tide were investigated, analyzed and classified. The classification of algae removal technologies was based on the three criteria (i.e., principle, flow rate of water body, and application period). Also, algae removal technologies were evaluated in terms of cost effectiveness, field applicability, effect durability, and eco friendliness. From the analysis results, technologies using physical, chemical, biological, and convergent controls were 32.2%, 25%, 21.4%, and 21.4%, respectively. The 75% of technologies have been applied to stagnant water body (${\leq}0.2m/s$). Also, algae harvesting ship with dissolved air flotation, conveyor belt and filtration processes and natural floating coagulant were found to have better field applicability, compared to other technologies. However, proper algae removal technology in specific rivers and lakes should be chosen after the evaluation of long-term pilot scale field test. Also, development of energy and resource recovery technologies from algae biomass is warranted.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.103-112
• /
• 2020

In this study, based on actual project implementation cases, task management plans for construction management related green building certification were derived in major stages. Accordingly, the importance from details of construction management tasks for the operation and management process of the schematic design phase, design development phase, and construction document phase, focusing on G-SEED certification, was analyzed. In addition, major items were derived based on the weight of additional construction costs and acquisition scores through previous research cases on the analysis of construction costs for G-SEED certification, and the importance from details of construction management tasks on the major items of G-SEED certification was analyzed. As a result, the review and confirmation of the elements of reflection related to G-SEED in the schematic design phase, the adequacy of design documents and the connectivity of design phase in the design development phase were important. And the review and confirmation of the items directly related to the construction phase in the construction document phase were important.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.447-453
• /
• 2018

Since 1960, Korea the town center was developed intensively due to rapid industrial development. As a result of the development, the population was concentrated in urban areas and the green area was decreased. Due to the decrease of the green area, the circulation system of the rainwater was changed, hence the rainwater was not introduced into the groundwater., On the other hand, the water on the surface of the road was changed into the water for flowing to the river and evaporation. The changes in the water flow cause many problems, and the depletion of the groundwater does not create an environment in which microorganisms and plants can live. in Korea, permeable pavement construction is increased to solve these problems, but existing pavement blocks have many problems. The pores of the permeable block are clogged due to the accumulation of dust or whitening phenomenon, and the permeability is lost. In this study, the solution of the problems of existing permeable block were suggested by using polymer and artificial permeable pipe, and strength, permeability and service life are increased, The relationship between the substitution rate of the polymer and the mixing ratio of the artificial permeable pipe was analyzed.