• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.667-672
• /
• 2019

As a non-renewable energy source, fossil fuel causes environment problems, numerous efforts have been made for a global decarbonization, for example, the realization of Power 2 Gas (P2G) system as a definitive research goal. In particular, ammonia is regarded as an emerging source since it can be used as a hydrogen carrier and production alongside for fuel cell applications. In this mini-review, we summarized the properties of ammonia and further highlighted the worldwide research trend for its superb potential in hydrogen energy supply industries.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.635-646
• /
• 2004

Chronic outbreaks of green tide in the Nakdong estuary toll a heavy socioeconomic cost. The paper investigates the influence of sediments on the nitrogen eutrophication, being claimed as the primary cause of green tide. To measure the flux of nitrate at the sediments-water interface, sediment cores were taken in Jan., Mar., May and Sep., 2000 at Noksan located in the West-Nakdong river estuary. The dissolved oxygen was profiled and then the pore water was extracted in situ. Core samples were analyzed for their textural characteristics. Cores were incubated by a novel technique to measure the fluxes of nitrate $(NO_3^-)$ and ammonia $(NH_4^+)$ at the sediment-water interface. The dissolved oxygen was depleted usually within several millimeters in the top sediments. Nitrate started to decrease drastically at the layer where dissolved oxygen was nearly depleted. Nitrate was also exhausted within several centimeters, followed by ammonia build up rapidly. The flux at the sediments-water interface calculated from the pore water concentrations revealed that nitrate was removed from the water column into the sediments. The sediment incubation experiment confirmed the above result. On the other hand ammonia were released from the sediment to the water column. As the incubation went on, however, the nitrate concentration in the overlying water was dropped below that of a top sediment. Then the flux is reversed, i.e., nitrate was released from the sediments to the water column. The implication is that the sediment can supply nitrate to the water column if it falls below a certain level. Thus it is likely that sediments in the eutrophicated river buffers the nitrate concentration in the water column, which leads to a prolonged green tide.

• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.125-132
• /
• 2015

The Far Infrared Ray (FIR) is part of the natural energy as light spectrum of sunlight. Human can disentangle the colors within visible ray, but FIR is invisible to human sight because it has longer wavelength than visible ray. The effect of using FIR on broiler performance, blood biochemical profiles and fecal gas emission from litter. Day-old semi-broiler chicks (Ross ♂ ${\times}$ Hyline ♀) were obtained and assigned to eight pens, 2 replicates of white and green color LED light, and with FIR on each color light, in a 20L:4D of lighting program. The body weight gain and feed efficiency were tend to improve under the green color than white color, which were increased by exposing to FIR on both color light. Emission of ammonia and lower hydrocarbons from litter were not different from each color but there was a decrease by exposing to FIR regardless of light color. The level of blood aspartate aminotransferase (AST) tends to be decreased under green color than white color, and this tendency becomes more pronounced as exposing to FIR. Therefore significantly increased under white color without FIR than green color with FIR (P<0.05). The levels of albumin and immunoglobulin were not different from each color but there was an increase by exposing to FIR regardless of light color. In conclusion, exposing to Far Infrared Ray (FIR) when broiler raising, there is potential to increase broiler performance because of improvement of bioactivity and raising environment.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1534-1538
• /
• 2011

Uniform, hollow nanosilica spheres were prepared by the chemical coating of cationic polystyrene (cPS) with tetraethylorthosilicate (TEOS), followed by calcination at 600 $^{\circ}C$ under air. cPS was synthesized by surfactant-free emulsion polymerization using 2,2'-azobis (2-methyl propionamidine) dihydrochloride as the cationic initiator, and poly(vinyl pyrrolidone) as a stabilizer. The resulting cPS spheres were 280 nm in diameter, and showed monodispersion. After coating, the hollow silica product was spherically shaped, and 330 nm in diameter, with a narrow distribution of sizes. Dispersion was uniform. Wall thickness was 25 nm, and surface area was 96.4 $m^2/g$, as determined by BET. The uniformity of the wall thickness was strongly dependent upon the cPS surface charge. The effects of TEOS and ammonia concentrations on shape, size, wall thickness, and surface roughness of hollow $SiO_2$ spheres were investigated. We observed that the wall thicknesses of hollow $SiO_2$ spheres increased and that silica size was simultaneously enhanced with increases in TEOS concentrations. When ammonia concentrations were increased, the irregularity of rough surfaces and aggregation of spherical particles were more severe because higher concentrations of ammonia result in faster hydrolysis and condensation of TEOS. These changes caused the silica to grow faster, resulting in hollow $SiO_2$ spheres with irregular, rough surfaces.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.594-600
• /
• 2023

In this study, a process model and optimization design direction for a hydrogen production plant through ammonia decomposition are presented. If the reactor decomposition rate is designed to approach 100%, the amount of catalyst increases and the devices that make up the entire system also have a large design capacity. However, if the characteristics of the hydrogen regeneration process are reflected in the design of the reactor, it becomes possible to satisfy the total flow rate of fuel gas with the discharged tail gas flow rate. Analyzing the plant process simulation results, it was confirmed that when an appropriate decomposition rate is maintained in the reactor, the phenomenon of excess or shortage of fuel gas disappears. In addition, it became possible to reduce the amount of catalyst required and design the optimized capacity of the relevant processes.

• New & Renewable Energy
• /
• v.20 no.2
• /
• pp.17-25
• /
• 2024

In this study, the effect of the time step specified in a computational fluid dynamics (CFD) simulation on load response is analyzed and the drag coefficients of the floating body of floating offshore wind turbines (FOWTs) are estimated. By evaluating the error in the FOWT load response and the change in the drag-coefficient values based on the density of the time intervals, this study aims to establish a time-interval setting that minimizes the time and cost of CFD simulations for selecting drag-coefficient values. Practical CFD utilization strategies necessary for the calibration of medium-to high-fidelity analysis tools are presented. Based on a comparative analysis of CFD simulations conducted at various time intervals, the results confirmed that under a certain time interval that sufficiently considers various factors, the accuracy of the FOWT response with respect to density shows minimal differences, thereby providing an efficient utilization method for CFD simulations in FOWT design and analysis.

• Clean Technology
• /
• v.28 no.3
• /
• pp.218-226
• /
• 2022

As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO₂) emissions are being focused on. Among them, ammonia (NH₃) is an economical hydrogen carrier that can easily produce hydrogen (H₂). In this study, Ru/Al₂O₃ catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al₂O₃ catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L^-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h^-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R²) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.73-82
• /
• 2012

The main and side reactions of the three selective catalytic reduction (SCR) reactions with ammonia over a vanadium-based catalyst have been investigated using synthetic gas mixtures in the temperature range of $170{\sim}590^{\circ}C$. The three SCR reactions are standard SCR with pure NO, fast SCR with an equimolar mixture of NO and $NO_2$, and $NO_2$ SCR with pure $NO_2$. Vanadium based catalyst has no significant activity in NO oxidation to $NO_2$, while it has high activity for $NO_2$ decomposition at high temperatures. The selective catalytic oxidation of ammonia and the formation of nitrous oxide compete with the SCR reactions at the high temperatures. Water strongly inhibits the selective catalytic oxidation of ammonia and the formation of nitrous oxide, thus increasing the selectivity of the SCR reactions. However, the presence of water inhibits the SCR activity, most pronounced at low temperatures. In this study, the experimental results are analyzed by means of a dynamic one-dimensional isothermal heterogeneous plug-flow reactor (PFR) model according to the Eley-Rideal mechanism.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.541-547
• /
• 2023

The effect of temperature and influent alkalinity/ammonia (K/A) ratio on the start-up of the partial nitrification (PN) process for an activated sludge-based domestic wastewater treatment was studied. Two different sequence batch reactors (SBR) were operated at 26 ℃ and 32 ℃. The relationship between temperature and the concentration of free ammonia (FA) and free acid nitrite (FNA) was investigated. A stable PN process was achieved in the 32 ℃ reactor when the influent ammonium concentration was lower than 150 mg-N/L. In contrast, the PN process in the 26 ℃ reactor had a higher nitrite accumulation rate (NAR) and ammonium removal efficiency (ARE) when the influent ammonia concentration was increased to more than 150 mg-N/L. Then three different ranges of the K/A ratio were applied to an SBR reactor. In the K/A range of 2.48~1.65, the SBR reactor achieved the highest NAR ratio (75.78%). This ratio helps to achieve the appropriate level of alkalinity to maintain a stable pH and provide a sufficient amount of inorganic carbon source for the activity of microorganisms. At the same time, FA and FNA values also reached the threshold to inhibit nitrite-oxidizing bacteria (NOB) without a significant effect on ammonia-oxidizing bacteria (AOB). Results showed that the control of temperature and K/A ratio during the start-up period may be important in establishing a stable and steady PN process for the treatment of domestic wastewater.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.233-238
• /
• 1981

A recirculating water system without filter bed was used for a high density experimental rearing of common carp, Cyprinus carpio, during the summer of 1981. Of the water system, 3 tanks were used for stocking each tank with 10,000, 20,000 and 30,000 common carp fingerlings which averaged 0.6 g. The water in the system was maintained in dark green colour by heavy growth of phytoplankton during the most period of the experiment. In this experiment, the best daily growth rate, $3.7\%$, was obtained from the 10,000 fish group followed by $2.8\%\;and\;3.0\%$ from the 20,000 and 30,000 fish groups respectively. Thus there was no significant difference between the latter two groups. Especially, notably high concentration of total ammonia, $5\sim7$ ppm ammonia-N, in the culture water appeared during the most experimental period, but this did not seem to have affected feeding and growth of the fish when the water was kept at heavy bloom. It was also obvious that the outbreak of columnaris disease was effectively depressed in this green water recirculating system compared to that in clarified recirculating system. One tank ($7m^2$) of this system was stocked with 446 common carp of intermediate size averaging 352.2 g and after 40 day rearing they grew to 486.3 g in average with a daily growth rate of $0.8\%$. This result was a little inferior to that reared in a tank of the clarified water system as control which showed $1.0\%$ daily growth rate. Therefore, before an initiation of the commercial production of fish in this method, further studies concerning the amount of ammonium with its effect on the fish under rearing in this system and the columnaris disease problem should be carried out.