• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1297-1309
• /
• 2007

The purpose of this study is to investigate the effect of shirt color, tie color, tone, perceiver' gender on impression formation by applying tone-in-tone coloration of shirt and necktie: coloration of two colors. This experiment was designed to utilize the $2{\times}6{\times}4{\times}2$ factorial designs. and they are shirt color(red, blue), tie color(red, yellow red, yellow, green, blue, purple), tone(vivid, light, dull, dark), and perceiver' gender(a male, a female). The experimental materials developed for this study were a set of stimulus and response scales. The stimuli were 48 upper body photographs which were color outputs by CAD system(4D-box program). The subjects of this research were 288 male and 288 female college students. There were established impression dimension from factor analysis 27 bi-polar adjectives and investigated the effect of interaction between each variable affected impression formations. The items of the adjectives are classified into 4 Impression dimensions: activity, potency, attractiveness, and tenderness. Shirt color, tie color, tone, and perceiver' gender influenced on impression formation. Specially, tie color and tone influenced on the 4 impression dimension greatly by interaction as well as independently. As a result tie is very important clue of impression formation in tone-in-tone coloration of shirt and necktie. Even though tie occupies only a small area in men's clothes it has great effect since it is close to the face.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.35-41
• /
• 2017

Materials exposed to outside will deteriorate due to various weathering factors such as sunlight, heat, temperature, humidity and so on. Therefore, predicting speed of degradation and life time is a very important issue. This research uses retro-reflective sheets with white and green which are most commonly used colors to conduct the outdoor exposure test and acceleration test of xenon arc in Arizona state in the United States, Chennai in India, Sanary in France and Seosan in Korea to measure the reflective performance of retro-reflection. The accelerated factor was obtained by using regression analysis through reflective values obtained from the acceleration test of xenon arc from Seosan area. Also, by using solar uv program, the accelerated factor of various climate regions were obtained and it was confirmed that the accelerated factor of Senary was 1.04, Arizona 1.82, Chennai 1.92 times higher than that of Seosan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.3
• /
• pp.303-309
• /
• 2013

Marine algal flora and community structure were investigated seasonally at three sites in Gijang on the south-east coast of Korea from February 2006 to January 2007. A Total of 74 species were collected and identified, including 8 green algae, 16 brown algae, and 50 red algae. Of these, 15 species were found throughout the survey period. Mean biomass was 823.2-1,615.4 g wet weight $m^{-2}$ in winter, 689.1-3,196.8 g wet weight $m^{-2}$ in spring, 574.5-1,219.9 g wet weight $m^{-2}$ in summer, and 747.6-1,616.2 g wet weight $m^{-2}$ in autumn. The flora could be classified into six functional groups: coarsely branched form (37.8%), thick leather form (18.9%), sheet form (13.5%), filamentous form (12.2%), jointed calcareous form (10.8%) and crustose form (6.8%). The R/P, C/P and (R+C)/P values reflecting the flora characteristics were 3.13, 0.50 and 3.63, respectively. The number of marine algae species and the biomass in Gijang area were markedly reduced when compared with previous studies. This result suggests possible future changes in the algal vegetation, considering the physical and chemical pollution loadings in the coastal marine environment of this area.

• Particle and aerosol research
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2016

In this work, we evaluated the characteristics of flow field and uniformity of the nose-only exposure chambers for the inhalation toxicity test. Computational fluid dynamics (CFD) modeling was carried out to demonstrate uniformity of the nose-only exposure chambers. Because it is very important in the inhalation toxicity experiments that test materials are distributed uniformly to each holder of the chamber. The test was done with these 3 types of chamber with different form to develop inhalation toxicity evaluation system, easy-to-operate system among exposure chamber used for evaluating inhalation toxicity of environmental chemical mixtures. Through CFD interpretation, nose-only exposure chamber was made with the selection of the optimal conditions. For its evaluation, one type of fragrance was selected and measured particle size distribution of each port. The gene becoming luminous to green fluorescence was combined with GPT-SPE, a type of tGFP vector, to be inhaled to the mouse. Based on this, luminous intensity was checked. As a result, total particle number concentration of each port had average value of $3.17{\times}10^6{\sharp}/cm^3$ and range of the highest and lowest concentration value was approximately ${\pm}4.8%$. Autopsy of lung tissues of mouse showed that it had clearly better delivery of gene compared to the control group.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.115-120
• /
• 2017

In recent, it is worldwide issued that nanoscale science and technology as a solution have supported to increase the sensing performance in carbon nanotube based biosensor system. Containing material chemistry in various nanostructures has formed their high potentials for stabilizing and activating biocatalyst as a bioreceptor for medical, food contaminants, and environmental detections using electrode modification technologies. Especially, the large surface area provides the attachment of biocatalysts increasing the biocatalyst loading. Therefore, nano-scale engineering of the biocatalysts have been suggested to be the next stage advancement of biosensors. Here, we would like to study the electrical mechanism depending on the exposure methods (soaking or dropping) to the sample solution to the assembled carbon nanotubes (CNTs) on the gold electrodes of biosensor for a simple and highly sensitive detection. We performed various experiments using polar and non-polar solutions as sampling tests and identified electrical response of assembled CNTs in those solutions.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.348-353
• /
• 2003

This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.90-97
• /
• 2009

Sedum takesimenses among the Korean Native Genus Sedum was selected as evergreen ground covers during winter in the central districts of Korea. In order to obtain basic information for production as a pot flower with good quality, the effects of pinching frequencies on growth and flowering of S. takesimense were investigated. S. takesimense plant height became much shorter and numbers of lateral shoots were increased with increased pinching. Shoots of S. takesimense treated with 30% pinching during 2004 and 2005 showed greater length and less number of lateral shoots than those with 60% pinching. Leaves of S. takesimense treated with 70% shading showed a dark green color and had a longer shoot length and a lower number of shoots than cultivation under full sunlight. Therefore, Korean native S. takesimense will be utilized as ground cover treated with 70% shading or under a tree. Therefore, S. takesimense will be promising as ground cover materials in the central districts of Korea.

• Journal of the Speleological Society of Korea
• /
• v.59
• /
• pp.21-36
• /
• 1999

Most scholars calssify caves into natural resource, but caves possess values of natural and human resource, mix up the features of natural resources and human resources. Now, caves are distributed 260 in Korea. Seongryu Cave is showed in 1967 for the first time, till 1997 12 caves is opened to tourist. But since 1996 the 12 show caves of all is not launched the safety and environment-protection check-up adduced reason for IMF. Then caves must maintain environment of the normal temperature, humidity and dark. But the environment of caves are destroyed by tourism development. Thus to maintain environment of caves, it used to consider the counterplan as follows in restraint of the environmental change. Firstly, in case of development work to open caves, it must keep up with the prototype. Secondly, it must establish a freight depositary to prevent the influence of the caves's stain and damage due to tourist's objects. Thirdly, to maintain the normal temperature and humidity, it must install artificial poultice equipment of the inner parts of caves. Fourthly, in order to prevent the occurrence of $CO_2$, it must assessment of the optimum number of the greatest stayer. Fifthly, the control of closure for a given period of time is useful of the restoration to the cave's original state. Sixthly, by means of make narrow entrance, it should not influence the outer's air on the inner parts on caves. Seventhly, to keep the temperature of the inner part of caves, the lightening should be maintained moderately considering the convenience of a tour. Eightly, when water-proof cables for the lightening bulbs are connected each other, silicon tape is suitable and circuit breakers should be installed at the diverging points of the cables. Ninthly, the direction and angle of the lightening must be changed periodically to prevent green-pollution at the lightening spot. Lastly, when facilities and arrangements are equipped, corrosive materials should be excluded if circumstances allow.

• Journal of the Korean Dietetic Association
• /
• v.12 no.2
• /
• pp.157-171
• /
• 2006

This study was intended to suggest HACCP-based standard recipe for bellflower roots, classified as no thermal cooking process, served in a university foodservice operation. The time-temperature and microbial contamination level in each cooking step were analyzed. The temperatures of bellflower root, peeled garlic and green onion at receiving were at 13.8$\pm$2.8, 12.6$\pm$2.9 and 13.7$\pm$$0.8^\circC$ respectively, which were above the temperature limit. The time consumed for pre-preparation was up to 90 min at room temperature having high microbial growth potential. The levels of total plate counts (TPC) of bellflower root and garlic were over the limit of $10^6$ CFU/g as were the numbers of coliforms in bellflower roots. There were no microbial reductions in pre-preparation and cooking, which resulted in over $10^5$- $10^6$ CFU/g of TPC at service step. Two CCPs identified were washing/sanitation at pre-preparation and service steps. The control measures were washing/sanitation and temperature control. It was verified that CCPs for no cooking process developed in preceding studies were applicable for the microbiological food safety of this menu item. The HACCP-based standard recipe was developed to produce a quantity for 100 servings by observing the critical limits established for CCPs. These results suggest that the selection of proper provider is imperative to control the microbial contamination of raw materials at purchasing step. Also, the sanitary education program should be developed for the employees to understand and comply the HACCP plan and standard recipe.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.4
• /
• pp.506-513
• /
• 2012

This principal objective of this study was to evaluate the sensory properties and flavor compounds of Kimchi prepared with different levels (0.0%, 0.4%, 0.8%, and 1.2%) of Backryeoncho extracts (BE). At high levels of BE, Kimchi showed increased level of crispness and flavor, and also jeotgal odor decreased in the sensory evaluation. Addition of 0.8 % BE resulted in the highest scores for color, taste, and overall acceptance of Kimchi. Therefore, addition of 0.8 % BE appears to be an acceptable approach to enhance the quality of Kimchi without reducing acceptability. As a result of flavor compound analysis, a total of 24 volatile flavor compound, including 11 S-containing compounds, 6 terpenes, 1 acid, 1 ester, 1 alcohol, 2 miscellaneous compounds, 2 thiocyanates, etc., were detected by GC/MS. The major volatile compounds were s-containing compounds and terpene hydrocarbon, and especially terpene of sabinene was newly detected in Kimchi with added BE. Levels of 2-vinyl-[4H]-1,3-dithin derived from garlic flavor as a sulfide-containing compound along with diallyl trisulfide derived from green onion flavor were reduced in Kimchi with added 0.8% BE. Most sulfide-containing compounds were reduced in Kimchi with added BE, whereas most terpenes detected in control Kimchi were not detected.