• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.68-75
• /
• 2019

A low-crested structure (LCS) is an excellent feature not only because it provides shore protection but also because it is fully submerged. However, in order to properly control waves, it is necessary to maintain a certain range of crest height and width in consideration of the wave dimensions at the installation area. According to previous studies, an LCS has some wave breaking effect when the crest width is more than a fourth of the incident wavelength and the crest depth is less than a third of the incident wave height. In other words, if the crest width of the LCS is small or the crest depth is large, it cannot control the wave. Therefore, when an LCS is installed in a large sea area with a great tidal range in consideration of the landscape, waves cannot be blocked at high tide. In this study, the hydraulic performances of a typical trapezoidal LCS with a constant crest height and a low-crested structure with an adjustable crest height, which was called a tide-adapting low-crested structure (TA-LCS) in this study, were compared and evaluated under various wave conditions through hydraulic experiments. It was found that the wave transmission coefficients of the TA-LCS at high tide were lower than the values for the typical LCS based on empirical formulas. In addition, the hydraulic performances of the TA-LCS for wave reflection control were 12.9?30.4% lower than that of the typical LCS. Therefore, the TA-LCS is expected to be highly effective in controlling the energy of incoming waves during high tide even in a macro-tidal area.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.537-545
• /
• 2019

Stress analysis of bottom-hole rock has to be considered with much care to further understand rock fragmentation mechanism and high penetration rate. This original study establishes a fully coupled simulation model and explores the effects of overburden pressure, horizontal in-situ stresses, drilling mud pressure, pore pressure and temperature on the stress distribution in bottom-hole rock. The research finds that in air drilling, as the well depth increases, the more easily the bottom-hole rock is to be broken. Moreover, the mud pressure has a great effect on the bottom-hole rock. The bigger the mud pressure is, the more difficult to break the bottom-hole rock is. Furthermore, the maximum principal stress of the bottom-hole increases as the mud pressure, well depth and temperature difference increase. The bottom-hole rock can be divided into three main regions according to the stress state, namely a) three directions tensile area, b) two directions compression areas and c) three directions compression area, which are classified as a) easy, b) normal and c) hard, respectively, for the corresponding fragmentation degree of difficulty. The main contribution of this paper is that it presents for the first time a thorough study of the effect of related factors, including stress distribution and temperature, on the bottom-hole rock fracture rather than the well wall, using a thermo-poroelastoplasticity model.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.1
• /
• pp.55-62
• /
• 2019

Hayakawa Kunihiko introduced community space as an open space in Housing in Japan for the first time. We can find the continuity of his architectural intent from his three works (Atrium, Steps, Labyrinth) during the early period of his Housing buildings, In particular, from Labyrinth, his intent was expanded to cities through 'Urban Void', seeking communication and harmony. Accordingly, based on the architectural overview and a field survey of Labyrinth, an analysis was conducted using Space Syntax to investigate whether the space of an inner courtyard is being used as a community space for neighbors who pass through the courtyard and whether the courtyard plays the role of 'Urban Void' as intended by the architect. For this investigation, according to VGA, the courtyard showed the role of great visual connectivity and integration and facilitated connections to the center of the entire space. On the other hand, according to J-Graph, the access stairway connected to each household from the courtyard helped secure privacy in the midst of common space. Step Depth noted that a hierarchy of space was formed to ensure visual privacy within each unit household in addition to privacy for each household.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.59-63
• /
• 2021

This study presented the characteristics and additive effects of the grout with mixing ratio for developing of high-efficiency grouting technology under high depth conditions. The laboratory investigation were conducted with Portland cement (OPC) and micro cement (S8000-E) including viscosity experiments, particle size analysis experiments, Gel-Time experiments and uniaxial compressive strength experiments. As a result of the viscosity experiment, it was shown that OPC is advantageous in terms of viscosity, but S8000-E is suitable when considering the passage of rock joint intervals through particle size analysis. The Gel-Time experiment shows that it is not that difficult with injection as a grout material even when silica fume (SF) was applied. The strength of the cured material is improved as increase in the content of silica fium (SF). Within the range of the study, the optimal mixing ratio obtained through various experiments is S8000-E, w/c=70%, silica fium (SF)=6%, and 7 days.

• Journal of Yeungnam Medical Science
• /
• v.39 no.4
• /
• pp.322-331
• /
• 2022

Background: The combined use of biomaterials for regeneration may have great biological relevance. This study aimed to compare the regenerative potential of biphasic calcium phosphate (BCP) alone and with growth factor enamel matrix derivatives (EMDs) for the regeneration of intrabony defects at 1 year. Methods: This randomized controlled trial included 40 sites in 29 patients with stage II/III periodontitis and 2/3 wall intrabony defects that were treated with BCP alone (control group) or a combination of BCP and EMD (test group). BCP alloplastic bone grafts provide better bio-absorbability and accelerate bone formation. EMDs are commercially available amelogenins. Mean values and standard deviations were calculated for the following parameters: plaque index (PI), papillary bleeding index (PBI), vertical probing pocket depth (V-PPD), vertical clinical attachment level (V-CAL), and radiographic defect depth (RDD). Student paired and unpaired t-tests were used to compare the data from baseline to 12 months for each group and between the groups, respectively. The results were considered statistically significant at p<0.05. Results: At 12 months, the PI and PBI scores of the control and test groups were not significantly different (p>0.05). The mean V-PPD difference, V-CAL gain, and RDD difference were statistically significant in both groups at 12 months (p<0.001 for all parameters). Intergroup comparisons showed that the mean V-PPD reduction (2.13±1.35 mm), V-CAL gain (2.53±1.2 mm), and RDD fill (1.33±1.0 mm) were statistically significant between the groups at 12 months (p<0.001 for all parameters). Conclusion: BCP and EMDs combination is a promising modality for the regeneration of intrabony defects.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.4
• /
• pp.55-64
• /
• 2022

The objectives of this study were to assess physical habitat suitability of fish species for different life cycle stages and to suggest appropriate ecological stream flows in a Bokha downstream reach. A dominant species of Zacco platypus was selected as the study fish of which three stages of spawning, juvenile and adult in life cycle were considered into assessment. The stream hydraulic environment was calibrated with HEC-RAS before the PHABSIM simulation. The hydraulics of flow velocity and depth were used to estimate Weighted Usable Area (WUA) by multiplying respective habitat suitability indices with stream area. Overall the WUAs tend to be great in gentle slopes with relatively shallow water depth regions. Maximum WUAs, ie, candidate for ecological flow rates were 1 m³/s, 7 m³/s and 8 m³/s for the respective spawning, juvenile and adult stages of Zacco platypus. Since the ecological flow rates for juvenile and adult stages appeared to be is greater than the abundant flow rate (3.67 m³/s) for the study reach, additional water supply may be needed but should be cautious to avoid the spawning period of Apr through May from the stream water management perspective.

• Steel and Composite Structures
• /
• v.46 no.3
• /
• pp.385-401
• /
• 2023

Steel is becoming increasingly popular due to its high strength, excellent ductility, great assembly performance, and recyclability. In reality, steel structures serving for a long time in atmospheric, industrial, and marine environments inevitably suffer from corrosion, which significantly decreases the durability and the service life with the exposure time. For the mechanical properties of corroded steel, experimental studies are mainly conducted. The existing numerical analyses only evaluate the mechanical properties based on corroded morphology at the isolated time-in-point, ignoring that this morphology varies continuously with corrosion time. To solve this problem, the relationships between pit depth expectation, standard deviation, and corrosion time are initially constructed based on a large amount of wet-dry cyclic accelerated test data. Successively, based on that, an in-situ pitting evolution method for evaluating the residual tensile strength of corroded steel is proposed. To verify the method, 20 repeated simulations of mass loss rates and mechanical properties are adopted against the test results. Then, numerical analyses are conducted on 135 models of corrosion pits with different aspect ratios and uneven corrosion degree on two corroded surfaces. Results show that the power function with exponents of 1.483 and 1.091 can well describe the increase in pit depth expectation and standard deviation with corrosion time, respectively. The effect of the commonly used pit aspect ratios of 0.10-0.25 on yield strength and ultimate strength is negligible. Besides, pit number ratio α equating to 0.6 is the critical value for the strength degradation. When α is less than 0.6, the pit number increases with α, accelerating the degradation of strength. Otherwise, the strength degradation is weakened. In addition, a power function model is adopted to characterize the degradation of yield strength and ultimate strength with corrosion time, which is revised by initial steel plate thickness.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.3
• /
• pp.213-225
• /
• 2022

Objectives: The aim of this qualitative study was to investigate how members of the general public in Korea interpret the concept of health, and which dimensions of health are most important to them. We also explored their perceptions of the EuroQoL 5-Dimension (EQ-5D), including the EuroQoL visual analogue scale (EQ-VAS). Methods: We conducted face-to-face, in-depth interviews with 20 individuals from the general population, using a semi-structured interview guide. Content analysis was performed with verbatim transcripts and field notes to identify codes and categorize them according to their similarities and associations. Results: In total, 734 different codes were derived and classified into 4 categories. Participants cited the importance of both the mental and physical aspects of health, although they emphasized that the physical aspects appeared to play a larger role in their conceptualization of health. Participants noted that the EQ-5D has the advantage of being composed of 5 dimensions that are simple and contain both physical and mental areas necessary to describe health. However, some of them mentioned the need to add more dimensions of mental health and social health. Participants showed great satisfaction with the visually well-presented EQ-VAS. However, participants opined that the EQ-VAS scores might not be comparable across respondents because of different ways of responding to the scale. Conclusions: While physical health is a fundamental aspect of health, mental and social aspects are also important to Koreans. The content of the EQ-5D broadly matched the attributes of health considered important by Koreans.

• Journal of Industrial Convergence
• /
• v.21 no.12
• /
• pp.1-10
• /
• 2023

Along with the government's policy to encourage youth entrepreneurship, each university is making great efforts to promote entrepreneurship, and university entrepreneurship programs can be said to be the most important part of supporting and activating college students' entrepreneurship. In order to increase interest in and participation in entrepreneurship and entrepreneurship programs, it is necessary to take an in-depth look at students' perceptions of entrepreneurship and entrepreneurship programs. Therefore, this study used the effectiveness hierarchy model to explore the perceptions of college students at each stage and to identify bottleneck factors that hinder participation in entrepreneurship programs. For this purpose, focus group interviews and in-depth interviews were conducted using samples with different levels of interest and participation in entrepreneurship and entrepreneurship programs, and bottleneck factors at each stage of the effect hierarchy model were presented. The research results complement entrepreneurship research that was focused on quantitative research, and add important practical implications by approaching the study with a particular focus on local university cases.