• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.719-732
• /
• 2007

Purpose: Various bone graft materials are being used for periodontal tissue regeneration. Th materials are being developed continuously for ideal clinical effects. Therefore, it is necessary to identify the clinical characteristics of each bone graft material through comparing the various bone graft materials statistically and in doing so, proposing a more efficient bone graft material. In this study, the following results were attained through comparing the clinical effects among the bone graft materials, using the statistical method based on the clinical studies published at the department of periodontology of Yonsei hospital. Materials and Method: 6 selected studies of department of Periodontology at Yonsei University Hospital were based on clinical study of bone grafting in intrabony defects. It was compared the clinical parameters among the 6 clinical studies, using the statistical META analysis. Result: When comparing the probing depth reduction, there was a relatively great amount of decease when using the xenograft, Anorganic Bovine Derived Hydroxapatite Bone Matrix/Cell Binding Peptide(ABM/P-15: PepGen $P-15^{(R)}$) and the autogenous bone and absorbable membrane, d, 1-alctide/glycolide copolymer(GC: $Biomesh^{(R)}$). The allogfrafts showed a relatively low decrease in the probing depth and clinical attachment change. It also showed a slight decrease in the bone probing depth. The allografts showed various results according to different bone graft materials. When comparing the ABM/P-15 and bovine bone $powder(BBP^{(R)})$, ABM/P-15 showed a relatively high clinical attachment level and the bovine bone powder showed a relatively high clinical attachment level. The probing depth change and gingival recession change showed a lower value than the mean value between the two bone graft materials. The synthetic bone showed a relatively high decrease in clinical attachment level and periodontal probing depth change. There was a relatively larger amount of gingival recession when using Bioactive Glass(BG) but a relatively low bone regeneration effect was seen. Conclusion: Good restorative results of the periodontal tissue can be attained by applying the various bone graft materials being used today after identifying the accurate clinical effects.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2E
• /
• pp.16-25
• /
• 1998

This paper attempts to examine the characteristics of underwater acoustic signals distorted in shallow water environments. Time signals are simulated using an acoustic model that employs the Fourier synthesis scheme. An acoustic experiment was conducted in the shallow sea near Pohang, Korea, where water depth is about 60m. The environment in the simulation is set up so that it approximates the experimental condition, which can be regarded as range-independent. The signal is LFM(linar frequency modulated) type centered on one of the four frequencies 200, 400, 600 and 800Hz, each being swept up or down with the bandwidth of 100Hz. To analyze the signal characteristics, the study introduces a spectrum estimation scheme, pseudo Wigner-Ville distribution (PWVD). The simulated and measured signals suffer great interference by the interaction of neighboring rays. Although there are constructive or destructive interference, the signals keep LFM characteristics well. This is thought that only a few dominant rays of small loss contribute to the receive signals in a shallow water environment.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.593-601
• /
• 2015

We summarize the twelve papers carefully selected for aging, pensions, and related issues, The twelve novel papers are grouped into three categories: sustainability, adequacy, pension reforms. In particular, these twelve papers include depth and extensive discussions for national pension system and present the direction of the various pension reforms. It will be a great help to policy makers and researchers.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.71-77
• /
• 2004

While doing games, units have to find goal And according to algorism, there is great difference in time and distance. In this paper the researcher compared and described characteristics of each of the improved algorism and A* algorism by giving depth-first search, breadth-first search and distance value and then argued algorism. In addition. by actually calculating the presumed value in A* a1gorism, the researcher finds the most improved value. Finally, by means of comparison between A* algorism and other one, the researcher verified its excellence and did simple path-finding using A* algorism.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.203-206
• /
• 2007

In urban flood model, the features like roads, buildings, and river's banks have great effect on flow dynamics and flood propagation and it must be accounted for model set-up. Two-dimensional hydraulic models in high-density building areas are at the forefront of current research into flood inundation mechanisms, but they are however constrained by inadequate parameters of topography and friction due to insufficient and inaccurate data. This paper describes the development of urban flooding with the extraction of building areas and estimates the its influence on flood inundation extent, and present initial results of flood simulation varying grid size.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1039-1049
• /
• 2007

This study analyzed two dimensions hydraulic characteristic for actual flood events in steep meandering channel. It could get analysis results as follows; A water level difference of downstream more great than one of upstream at inner and outer of meandering channel. It judged that a significance of downstream level could appear more greatly in meandering channel bank, hydraulic structure and flood inundation analysis. As velocity and depth analysis was shown that much amount flow passing fast velocity happened in meandering channel, it could help establishment of meandering channel bank. In this study, the results of two dimension hydraulic analysis results could help a counterpaln establishment for the flood inundation and bank collapse.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.266-272
• /
• 2002

High-speed machining is one of the most effective technology to improve productivity. Because of the high speed and hugh fried rate, high-speed machining can alive great advantages for the machining of dies and molds. This paper describes on the improvement of machining accuracy in high-speed machining. Depth of cut, feed rate and spindle revolution are control factors. The effect of the control factors on machining accuracy is discussed fur the results of surface roughness and machining error in Z-direction of the high speed machining.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.19-28
• /
• 2005

Passive microwave remote sensing technique have shown great potential for mon monitoring regional/global surface soil moisture. Given a single measurement at dual polarization/single frequency/single view angle, a strategic approach to artificially generating multiple microwave brightness temperatures is presented. And then the statistically generated microwave brightness temperature data are applied to the inverse algorithm, which mainly relies on a physically based microwave emission model and an advanced single-criterion multi-parameter optimization technique, to simultaneously retrieve soil moisture and vegetation characteristics. . The procedure is tested with dual polarized Tropical Rainfall Measurement Mission Microwave Imager (TRMM/TMI) over two different cover sites in Oklahoma and Beltsville field experimental data. The retrieval results are analyzed and show excellent performance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.928-938
• /
• 2006

Tween refers 'between' generation aged of 10-16 who are between child and high teens. Tweens have been regarded as one of the fast growing markets and they show some unique characteristics as next-generation consumers. This study has explored the perception of their appearances and clothing styles, style preferences, and influencing factors on clothing behavior of tweens. 120 students aged of 12-15 participated in depth interview and data were structured and categorized by applying domain analysis. Results showed tweens have great concerns on their appearances and styles, so they want to express their identities and aesthetic favors through clothing styles. As for clothing style preferences, they have multi-facet tastes such as casual, active, feminine/ masculine, sophisticated, dramatic, etc. Factors influencing on their clothing behavior include reference groups like friends, dual desires of conformity and individuality, fashion, and brand names.

• Structural Engineering and Mechanics
• /
• v.43 no.4
• /
• pp.449-458
• /
• 2012

Finite element buckling analysis of insulated transition flue ducts is carried out to determine the critical buckling load multipliers when subjected to axial compression for design process. Through this investigation, the results of numerical computations to examine the buckling strength for different possible duct shapes (cylinder, and circular-to-square) are presented. The load multipliers are determined through detailed buckling analysis taking into account the effects of geometrical construction and duct plate thickness which have great influence on the buckling load. Enhancement in the buckling capacity of such ducts by the addition of horizontal and vertical stiffeners is also investigated. Several models with varying dimensions and plate thicknesses are examined to obtain the linear buckling capacities against duct dimensions. The percentage improvement in the buckling capacity due to the addition of vertical stiffeners and horizontal Stiffeners is shown to be as high as three times for some cases. The study suggests that the best location of the horizontal stiffener is at 0.25 of duct depth from the bottom to achieve the maximum buckling capacity. A design equation estimating the buckling strength of geometrically perfect cylindrical-to-square shell is developed by using regression analysis accurately with approximately 4% errors.