• 대한전자공학회논문지SP
• /
• 제39권5호
• /
• pp.504-512
• /
• 2002

본 논문에서는 plasma display panel에서 동영상을 표현할 때 발생할 수 있는 dynamic false contour (DFC) 등의 화질 열화를 개선할 수 있는 subfield 기법에 관하여 고찰한다. 인접한 subfield 들간의 시간 길이 차이로 인하여 DFC가 발생한다는 사실을 파악하고, 그 차이를 일정하게 유지하는 기울기가 일정한 code를 제안한다. 그리고, 에러의 첨두치와 지속 시간의 trade-off 관계를 고려하여 에러의 절대값의 평균을 최소화 할 수 있도록 상이한 시간 길이를 갖는 subfield들을 배열한 code를 제안한다. 제안한 subfield 기법은 계조값에 비례하여 에러의 크기가 증가하는 것을 보임으로써 인간의 시각적 특성 관점에서도 적합한 방법임을 입증하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.67-74
• /
• 2004

Numerical analysis code has been developed for investigating the combustion characteristics in a slab heater of a steel mill company. Unsteady full 3-Dimensional behaviour can be predicted with the code. Premixed flame model is adopted for combustion phenomena. And eddy dissipation model is used for turbulent flow and non gray FVM method for radiation. Slab movement can be fully traced from entrance into heater until it's exit and computation is performed during that period. Code was validated by comparing the calculation results with experimental ones for the bench scale heater.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.534-541
• /
• 2003

To investigate the combustion characteristics in a low-pollutant municipal waste incinerator, the generalized multi-block simulation code that can be applied to turbulent reacting flow with gaseous hydrocarbon fuel in a 3D complex geometry has been developed with nongray radiation effects. To deal with the complex geometry, structured multi-block method and the scheme which treats interfaces implicitly are adopted. The developed code is validated through various engineering problems such as curved duct flow, driven cavity flow, gray multi-block radiation, nongray radiation. and combustion in a incinerator.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권2호
• /
• pp.155-160
• /
• 2004

In this paper, we describe the results of a study on the edge enhancement of X-ray images by using their fuzzy system representation. A set of gray scale X-ray images was generated using the EGS4 computer code. An aluminum plate or a lead plate with three parallel strips taken out has been used as the object with the thickness and the width of the plate, and the gap between the two strips varied. We started with a comparative study on a set of the fuzzy sets for their applicability as the input fuzzy sets for the fuzzy system representation of the gray scale images. Then we describe how the fuzzy system is used to sharpen the edges. Our algorithm is based on adding the magnitude of the gradient not to the pixel value of concern but rather to the nearest neighboring pixel in the direction of the gradient. We show that this algorithm is better in maintaining the spatial resolution of the original image after the edge enhancement.

• 조명전기설비학회논문지
• /
• 제24권11호
• /
• pp.30-41
• /
• 2010

In this study we propose a new texture feature extraction method based on an estimation of the brightness and structural uniformity of CT images representing the important characteristics for emphysema recognition. The Center-Symmetric Local Binary Pattern (CS-LBP) is first used to combine gray level in order to describe the brightness uniformity characteristics of the CT image. Then the gradient orientation difference is proposed to generate another CS-LBP code combining with gray level to represent the structural uniformity characteristics of the CT image. The usage of the gray level, CS-LBP and gradient orientation differences enables the proposed method to extract rich and distinctive information from the CT images in multiple directions. Experimental results showed that the performance of the proposed method is more stable with respect to sensitivity and specificity when compared with the SGLDM, GLRLM and GLDM. The proposed method outperformed these three conventional methods (SGLDM, GLRLM, and GLDM) 7.85[%], 22.87[%], and 16.67[%] respectively, according to the diagnosis of average accuracy, demonstrated by the Receiver Operating Characteristic (ROC) curves.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.242-250
• /
• 2006

Detailed structures of the counterflow flames formed for different inlet fluid temperatures and different amount of additives are studied numerically. The detailed chemical reactions are modeled by using the CHEMKIN-II code. The discrete ordinates method and the narrow band based WSGGM with a gray gas regrouping technique (WSGGM-RG) are applied for modeling the radiative transfer through non-homogeneous and non-isothermal combustion gas mixtures generated by the counterflow flames. The results compared with those obtained by using the SNB model show that the WSGGM-RG is very successful in modeling the counterflow flames with non-gray gas mixture. The numerical results also show that the addition of $CO_2\;or\;H_2O$ to the oxidant lowers the peak temperature and the NO concentration in flame. But preheat of fuel or oxidant raises the flame temperature and the NO production rates. $O_2$ enrichment also causes to raise the temperature distribution and the NO production in flame. And it is found that the $O_2$ enrichment and the fuel preheat were the major parameters in affecting the flame width.

• 정보처리학회논문지B
• /
• 제15B권4호
• /
• pp.259-268
• /
• 2008

일차원 심벌의 데이터 용량 문제를 극복하기 위하여 십 여년 전에 2차원 바코드가 처음으로 소개되었다. 본 논문에서는 그레이 영상에서부터 2차원 바코드 영역을 검출하기 위한 알고리즘을 제안하는데, 특히 손에 들고 사용하는 2D 바코드 인식 시스템에 탑재를 목표로 한다. 제안된 방법에서는 먼저 영상 내 2차원 바코드의 대략적인 위치를 검출하기 위해 블록 명암대비를 바탕으로 한 후보블록 기준을 정의하고, 관심영역으로부터 바코드 영역을 정확히 분리하기 위해 그레이 스케일 프로젝션과 부 화소 처리를 사용한다. 마지막으로 분리된 바코드 영역은 이어지는 디코딩 단계를 위해 역 투시변환을 통해 정규화 된다. 본 논문에서는 QR-코드에 대한 디코딩을 위한 후처리 과정도 소개한다. 제안된 방법은 다양한 조명상태나 인쇄상태 및 투시변환에 의해 영상에 강한 왜곡이 있는 경우에도 좋은 성능을 나타낸다. 실험을 통해 제안된 방법이실시간으로 다양한 종류의 2차원 바코드에 대한 코드영역을 안정적이고 효과적으로 추출해 주는 것을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.73-77
• /
• 2003

This paper presents a high-speed algorithmic analog-to-digital converter (ADC), which is based on gray coding. The realization method makes use of a two-input maximum circuit to provide a high-speed operation and a low-distortion in the transfer characteristic. The proposed ADC based on the CMOS integrated circuit technique is simple and suitable for implementing a highresolution ADC. The performances of the proposed circuit were studied using the PSPICE analog simulation program. The simulation-results verifying the circuit performances are agreed with the expected values.

• Journal of applied mathematics & informatics
• /
• 제34권5_6호
• /
• pp.397-404
• /
• 2016

In this work, a method is given to construct quantum codes from cyclic codes over F₄ + vF₄ which will be denoted as R throughout the paper, where v² = v and a Gray map is defined between R and where F₄ is the field with 4 elements. Some optimal quantum code parameters and others will be presented at the end of the paper.