• Journal of architectural history
• /
• v.22 no.4
• /
• pp.35-44
• /
• 2013

This paper looked into the structure of and changes in the building process of Gijang mountain fortress and its receiving reservoir by analyzing data from an excavation investigation. The structure of the receiving reservoir may be classified into a flat form, stone sheath, floor facility, wall facility, and entry and exit facility. The flat form of the Gijang mountain fortress and receiving reservoir is round. Concerning the sectional form, the wall was obliquely excavated in the trapezoid. As a stone sheath building method, it was built by undertaking a range work of oblong stone materials in a clockwise direction on a stamped soil floor. Then, it was treated with stamping using double layers of gray clay and yellowish brown clay on the floor and the wall. Also, in a space between the stamped layers on the floor, herbal plants and a straw mat were laid for waterproofing as well as to prevent sinking. As an entry and exit facility, two facilities were confirmed symmetrically in the southeast and in the northwest. It is believed that they were built additionally during rebuilding after the initial construction. The building process was revealed to have been carried out in 8 stages. Given the structure and excavated remains, the building period is estimated to be the early to mid 7th century for the initial building, the later 9th to 11th centuries for the primary rebuilding, and the later 16th to early 17th centuries for the secondary rebuilding.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.864-869
• /
• 1993

This paper presents the problem of automatically recognizing embossed or molded characters which are raised from the side wall on rubber tire. In the tire image objects have approximately the same gray-value as the background and because of the tire geometry, illumination of the surface is nonhomogenous. Therefore it is difficult to recognize the raised tire character. In this paper, for describing the process of processing three steps have been proposed: 1) MIN & MAX smoothing operation filter, 2) edge detection algorithm using modified laplacian operator, 3) noise rejection. Afterwards, segmentation is done to attain characters from tire image by projection method. The recognition of the characters in the segmented image is carried out by using multilayered neural network, which is insensitive to the noise.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.97-102
• /
• 2002

The Purpose of this study was to investigate the exterior materials of super high-rise housing more than 30 stories which were built in New York City between 1924 and 2004. The result of examining 153 buildings was as follows; Exterior materials of super high-rise housing which were used bricks, of the salt-glazed bricks, terra-cotta and ceramic tiles, jumbo bricks and bricks were preferred among them. The colour of bricks was yellow, yellow ochre, clear brown, brown, dark brown, orange, vermilion and red. Exterior materials of super high-rise hotel and hotel apartment were bricks and ceramic tiles in the early days but stones, curtain wall and glass(green glass, green-tinted glass, brown-tinted glass, black glass) after 1980s. The main colour of buildings extended gray, green, blue-tinted brown-tinted and black.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.451-457
• /
• 2001

This paper describes automated methods for the detection of lung nodules and their volume calculation on CT scans. Gray-level threshold methods were used to segment the thorax from the background and then the lung parenchymes from the thoracic wall and mediastinum. A scanning-ball algorithm was applied to more accurately delineate the lung boundaries, thereby incorporating peripheral nodules contiguous to pleural surface within the segmented lung parenchymes. The lesions which have the high gray value were extracted from the segmented lung parenchymes. The selected lesions include nodules, blood vessels and partial volume effects. The discriminating features such as size, solid-shape, average, standard deviation and correlation coefficient of selected lesions were used to distinguish true nodules from pseudo-lesions. Volume and circularity calculation were performed for each identified nodules. The identified nodules were sorted in descending order of the volume. These method were applied to 621 image slices of 19 cases. The sensitivity was 95% and there was no false-positive result.

• Geotechnical Engineering
• /
• v.2 no.3
• /
• pp.27-36
• /
• 1986

To investigate the seepage effect on the compacted backfill of retaining walls, an expriment and an analytical study were carried out First, the expriment was performed with a two-way permeameter newly designed for the do- termination on the degree of permeability anisotropy of compacted soils. As a result, e-log(kz/ky) plot showed a linear relationship, where kz and ky were permeability coefficients for the normal and the parallel directions to the compaction. The degree of permeability anisotropy, kz/ky was 2 to 4 at Dr>90% for sands, regardless of the methods of compaction. The kz/ky of the fine sand was greater than that of the coarse sand. Second, the exprimental results were applied to the extention of Gray's theory for the investigation of the active thrust affected by the seepage of permeability anisotropy. The active thrust was decreased with the increase in the degree of permeability anisotropy, and it It.as a little effect on wall friction.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.27-36
• /
• 2014

The purpose of this study is to provide necessary information for the establishment of remodeling range needed first to support the future remodeling of rural housing. For this, this study examined landscape characteristics of rural housing such as an outer wall, a roof, a fence, and a gate which are main elements of forming the landscape of a rural village and rural residents' perception for remodeling. The results were as follows. The subject rural housing mostly had a timber structure and a masonry structure. Common roof types were a hip-and-gable roof and a gable roof. Frequent materials were a panel, a tile, and slate and common colors were primary colors such as reddish brown, black, and gray. A fence made of cement blocks and finished by a white paint was often found. A closed gate with iron frames was common. A standup kitchen and a flush toilet inside the house were common. The family members of rural residents were mostly two including a farmer husband and his wife. Elderly people of sixty and over were the most common. For residential environment satisfaction, a half of respondents were not unsatisfied with residential environment mostly due to an old house. Most respondents who were not satisfied with residential environment had high perception for the need of remodeling. The most commonly asked remodeling part was a roof, followed by a toilet, and an outer wall, indicating that the need of exterior remodeling was higher than that of interior remodeling. For a remodeling method, a total improvement was preferred. Although some rural village housing was improved by support of the government, local governments, or social groups, there are still many old houses. As this co-existence of improved houses and old houses hinders the landscape of rural village, it is necessary to give a support. But rural residents' requests should be first actively reflected to establish a guideline of supporting rural house remodeling.

• Archives of design research
• /
• v.14 no.4
• /
• pp.87-98
• /
• 2001

In the Chosun Dynasty (1392-1910), the walls and chimneys of palaces, temples, and the houses of the upper-class show various characteristics of decorative design patterns. This study investigated ceramic bricks and roof tiles, which is one aspect of environmental design studies. This study aimed to provide a typology ot traditional Korean design of bricks and roof tiles used in walls and chimneys, and to show the design characteristics. This study collected 685 designs of bricks and roof tiles, and divided them into 18 categories and 5 types of design patterns based on object figures, architectural styles, materials, and decorative methods. In conclusion, there were differences and similarities among the design patterns. In general, the palaces mostly used red, gray, and black bricks that had more detailed designs presenting auspicious signs or exorcism. But, temples and the houses usually used (black) roof tiles horizontally configured with the edges overlapping to decorate as wall as to strengthen their structure.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.3
• /
• pp.55-65
• /
• 2019

Although crack on concrete exists from its early formation, crack requires attention as it affects stiffness of structure and can lead demolition of structure as it grows. Detecting cracks on concrete is needed to take action prior to performance degradation of structure, and deep learning can be utilized for it. In this study, transfer learning, one of the deep learning techniques, was used to detect the crack, as the amount of crack's image data was limited. Pre-trained Inception-v3 was applied as a base model for the transfer learning. Web scrapping was utilized to fetch images of concrete wall with or without crack from web. In the recognition of crack, image post-process including changing size or removing color were applied. In the visualization of crack, source images divided into 30px, 50px or 100px size were used as input data, and different numbers of input data per category were applied for each case. With the results of visualized crack image, false positive and false negative errors were examined. Highest accuracy for the recognizing crack was achieved when the source images were adjusted into 224px size under gray-scale. In visualization, the result using 50 data per category under 100px interval size showed the smallest error. With regard to the false positive error, the best result was obtained using 400 data per category, and regarding to the false negative error, the case using 50 data per category showed the best result.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2983-2988
• /
• 2007

In the present study, the numerical investigation on the effects of water-mist characteristics has been carried out for the fire suppression mechanism. The FDS are used to simulate the interaction of fire plume and water mists, and program describes the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The numerical model is consisted of a rectangular enclosure of $L{\times}W{\times}H=1.5{\times}1.5{\times}2.0m$ and a water mist nozzle that be installed 1.8m from fire pool. In the study, the parameters of nozzle for simulation are the droplet size and the spray velocity. Finally, the droplet size influences to fire flume on fire suppression than spray velocity because of the effect of terminal velocity, and the optimal condition for fire suppression is that the droplet size and the spray velocity are $100{\mu}m$ and 20m/s, respectively.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.542-547
• /
• 2001

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera can be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration in each region after the dye infusion reflects the large scale mixing while the followed slow decay reveals the small scale mixing. The temporal change of concentration probability functions conjectures the two sequential processes in the batch type mixing. An inactive column of water existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.