• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.11.1-11.1
• /
• 2009

Bulk-heterojunction type organic photovoltaic cells have been remarkably improved due to the development of efficient donors and post treatment process. However, most of researchers have studied on the OPVs using spin-coating method during the past decade. To commercialize the OPVs, much cheaper printing process should be developed such as inkjet, screen, gravure, and so on. In this study, we have focused on the development of printing technology using Inkjet and Aerosol-Jet printing, which can offer reliable device performance. Finally, 4.5% power conversion efficiency can be achieved under AM 1.5 1sun light illumination, which is the highest value in printed OPVs. We reveal that substantial improvement can be realized by highly efficient bulk heterojunction after printing. Also, we can confirm these two printing methods are promising fabrication methods for large area OPVs. Also, flexible and large area (18 cm2) printed OPVs have been fabricated and device performance will be discussed in detail.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.71-82
• /
• 2011

Electronic display markets has been developed. The cathode ray tube of brown form recently celebrated their 100th by first display. Also LCD of flat form recently celebrated their 25th by second display and it has advantage of small volume, lower consumption power. But FPD has problem that is property of brittle and noncarrying by glass substrate. Therefore the arrival of portable electronics devices has put an increasing premium on durable, lightweight and inexpensive display components. It is flexible display by third display. Also electronics field such as printed wiring board, RFID, membrane switch prefer flexible display. The conductive pattern can be used mostly in field of electronic displays and electronics. This manufacture of conductive pattern in present used is screen printing. The the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity. screen printing has problem that is low productivity and use not flexible substrate because of high fire temperature. This study was developed novel method to form the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1087-1090
• /
• 2008

This paper presents the electro-luminescence (EL) display lamp which is patterned on a curved surface by the pad printing method. The printing methods, including the gravure, screen, flexo, inkjet, and pad printing, have an advantage of one-step direct patterning. However, in general, the printing and semi-conductor process, except pad printing method, cannot be applied for patterning on a curved surface. Thus, in this paper, we used pad printing method for patterning an EL display lamp on a curved surface. The EL display lamp consists of 5 layers: Bottom electrode; Dielectric layer; Phosphor; Transparent electrode; Bus electrode. Finally, we printed EL display lamp on a dish, which has a radius of curvature 80mm. The EL display lamp was driven at AC 200V of 1kHz.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.8-12
• /
• 2009

According to a previous study, talc as a coating pigment can improve the viscosity and the water retention of coating color, the compressibility of coating layer, and hence gravure printability. Talc is also well known for its larger particle size than other pigments, which implies that less binder may be need due to its smaller specific surface area. This study investigated the possibility of reducing binder content for matte grade paper. Coating color was prepared with the Cotalc-2000, which showed the best properties in the previous study. The binder content was varied and the effect of binder content on the physical properties of coated paper and the gravure printability was investigated. It was shown that binder content could be reduced when talc was used as a coating pigment. The reduction in binder content did not influence gloss, roughness and the print density of coated paper but showed improvement in paper porosity, compressibility and missing dot.

• Proceedings of the Korean Printing Society Conference
• /
• 2007.11a
• /
• pp.59-64
• /
• 2007

We have manufactured low-curable silver pastes for gravure printing out of roll to roll printing process. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape, polyester resin, solvent and homogenized on a standard three-roller mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had good characteristics. With the manufactured paste in this study, RFID antenna circuit had flexible is manufactured and it had $10^{-4}{\sim}10^{-5}{\Omega}{\cdot}cm$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.56-61
• /
• 2010

Scanning head has used to detect the error signal in register controller. However the resolution of the system is not enough for E-printing(Electronic-paper printing). In this paper, the register mark shapes and process techniques are studied using a smart camera which can detect the register mark and calculate the printing error. With these, a register controller within 10[um] of error range is developed for e-printing system and confirmed with experiments.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.61-65
• /
• 2010

For the adaption of roll-to-roll printing method to the printed electronics, it is mandatory to increase the resolution of register errors. Therefore it is desired to derive the mathematical modeling of register error or to develop controller design. The cross direction register error was derived considering both lateral motion of moving web and transverse position of printing roll. The mathematical modeling was validated and the relationship between the lateral motion and register error was analyzed by numerical simulations in various operating conditions using multi-layer direct gravure printing machine. The results could be used for a design of the CD register in the multi-layer printing and the lateral motion caused by translation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.967-968
• /
• 2008

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1999.05a
• /
• pp.39-42
• /
• 1999

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.249-249
• /
• 2008