• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.76-77
• /
• 2000

Very narrow transmission peaks are generated by the phase-shifted fiber Bragg grating with phase-shift region. The width of the transmission peaks are about ～0.5nm. The characteristics of multi-wavelength source using the phase-shifted fiber Bragg grating are designed and analyzed. The source with two and three transmission peaks is analyzed (omitted)

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.64-68
• /
• 1999

The performance of a fiber Bragg grating strain sensor constructed with 3$\times$3 coupler is investigated. A 3$\times$3 coupler Mach-Zehnder (M/Z) interferometer is used as wavelength discriminator, interrogating strain-induced Bragg wavelength shifts. Two quadrature-phase-shifted intensities are synthesized from the as-coupled interferometer outputs, and digital arctangent demodulation and phase unwrapping algorithm are applied to extract the phase information proportional to strain. Due to the linear relation between the input strain and the output of quadrature signal processing, signal-fading problems eliminated. In the experiment, a fiber grating that was surface adhered on an aluminum beam was strained in different ways, and the photodetector signals were transferred and processed in a computer-controlled processing unit. A phase recovery fo 7.8$\pi$ pk-pk excursion, which corresponds to ~650$\mu$strain pk-pk of applied strain, was demonstrated. The sensor system was stable over the environmental intensi쇼 perturbations because of the self-referencing effect in the demodulation process.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.230-244
• /
• 1996

We derive analytic expressions for the spontaneous emission spectrum (SES) of a multisection distributed feedback (DFB) structure device employing complex coupled gratings including the effects of both facets reflections. The multisection DFB structure device used in the analysis is a general model which allows the independent phase of a grating in each section, and the sections without gratings. The expressions are the same as those derived by makino and glinski in case the gratings are index coupled and the phase of a grating in each section, ${\varphi}_k$ is '0' which means the phase of gratings in the device is ocntinuous. The expressions for the SES of a phase-shift-controlled (PSC) DFB structure device using tunable devices are derived from the general expressions. The number of parametes of the expressions is reduced by using the parameter of effective phase shift defined by the sum of the phase shift in a PSC region and the difference of the phase of a grating in each active region. Equations showing the effect of both facets reflections and the effective phase shift on the SES are derived. The validaty of the equations is verified by computer simultions. Computer simulation results also show the possibility of evaluating the structure parametes of the device from its SES.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.727-732
• /
• 2020

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of δL > 0, the threshold gain and the beam distribution in the longitudinal direction and the radiated power ratio P_l/P_r of the oscillation mode were compared for the cases of the phase of 𝜌_l=π and π/2. If the phase of 𝜌_l=π, in order to obtain a low threshold current and high frequency stability, κL should be greater than 8. In the case of the phase of 𝜌_l= π/2, when κL is larger than 4.0, the oscillation gain starts to be lower than when the phase of 𝜌_l=π. In order to lower the threshold current of a oscillation mode and enhance the frequency stability, κL should be greater than 8.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.141-144
• /
• 2002

Computer code was developed to design waveguide gratings based on coupled-mode equations and the transfer matrix formalism. The experimental set-up has been constructed for inscribing Bragg gratings in planar waveguides with a phase mask and uv laser beam, which enables alignment and packaging of grating devices as well as in-situ performance measurements. Bragg grating has been fabricated on silica planar waveguides with 0.75% Germanium concentration and its transmittance spectrum was measured to have 95% reflectance at the peak wavelength. Optical losses as the function of the misalignment were measured and their usage is described.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.5
• /
• pp.22-29
• /
• 2012

By using the cyclic properties of symmetric balance incomplete block design(BIBD) codes and arrayed-waveguide grating(AWG) routers, a compact optical CDMA network coder-decoder(codec) can be constructed. It can be observed that the various code families obtained by BIBD improve the BER performance compared to M-sequence code.

• Journal of the Optical Society of Korea
• /
• v.7 no.2
• /
• pp.89-96
• /
• 2003

A new method to control the free spectral range of a long period fiber grating is proposed and theoretically analyzed. As the refractive index decreases radially outward in the silica cladding due to graded doping of fluorine, waveguide dispersion in the cladding modes was modified to result in the effective indices change and subsequently the phase matching conditions for coupling with the core mode in a long period fiber grating. Enlargement of the free spectral range in a long period fiber grating was theoretically confirmed.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.205-210
• /
• 2004

The waveguide Bragg gratings have been fabricated by the phase-mask method. An excimer laser with maximum 600mJ output pulse energy and uniform phase masks have been used. Hydrogen loading is often used for enhancing the uv photosensitivity of the core, however, the resultant gratings show significant aging effect. In the present study, high temperature thermal annealing process has been investigated to obtain thermal gratings and process parameters are deduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1680-1686
• /
• 2010

Optical fiber Bragg grating to have the lowest transmitivity at 1549.9nm wavelength was fabricated using a Gaussian distributed KrF Eximer laser of 248nm lasing wavelength and a phase mask of 1.072um period. The proper alignment of an optic setup to fabricate fiber gratings was investigated and the reproductivity of the grating fabrication was examined using the obtained optimum fabrication condition in this experiment.