• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.119-128
• /
• 2008

Sewer rehabilitation is performed to improve the problem for urban drainage sewer system recently. However the data for the sewer system is not stored enough so that the sewer system is difficult to be managed systematically. In this study, a maintenance management system for urban drainage system is developed to store the data efficiently and manage the system systematically. In the developed system, a hydraulic and hydrologic analysis module is included to test the carrying capacity of a sewer pipe and estimate the amount of combined sewer overflows. The I/I and superannuation evaluation module is included in this system. The module distribute the total inflow/infiltration observed at the several sampling points in a drainage area to the individual pipes of the entire sewer system. Then the superannuation of a sewer pipe is evaluated according to the amount of I/I of the pipe. And in the developed system, the optimal rehabilitation priority module is included to determine the optimal priority and support the decision making for the sewer rehabilitation. The maintenance management system which is developed in this study is constructed by the association with the developed modules and the system is formed as graphical user interface system.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.263-275
• /
• 2006

This paper introduces an interactive contents authoring system which can easily and conveniently produce interactive contents for the Terrestrial Digital Multimedia Broadcasting (T-DMB). For interactive broadcasting service, T-DMB adopted MPEG-4 BIFS technology. In order to the interactive service becomes flourishing on the market, various types of interactive contents should be well provided prior to the service. In MPEG-4 BIFS, broadcasting contents are described by the combination of a large number of nodes, routes and descriptors. In order to provide interactive data services through the T-DMB network, it is essential to have an interactive contents authoring system which allows contents authors to compose interactive contents easily and conveniently even if they lack any background on MPEG-4 BIFS technology. The introduced authoring system provides powerful graphical user Interface and produces interactive broadcasting contents in the forms of binary and textual format. Therefore, the BIFS contents authoring system presented in this paper would vastly contribute to the flourishing interactive service.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.5
• /
• pp.765-772
• /
• 2011

Knowledge which is represented by formal logic are widely used in many domains such like artificial intelligence, information retrieval, e-commerce and so on. And for medical field, medical documentary records retrieval, information systems in hospitals, medical data sharing, remote treatment and expert systems need knowledge representation technology. To retrieve information intellectually and provide advanced information services, systematically controlled mechanism is needed to represent and share knowledge. Importantly, medical expert's knowledge should be represented in a form that is understandable to computers and also to humans to be applied to the medical information system supporting decision making. And it should have a suitable and efficient structure for its own purposes including reasoning, extendability of knowledge, management of data, accuracy of expressions, diversity, and so on. we call it ontology which can be processed with machines. We can use the ontology to represent traditional medicine knowledge in structured and systematic way with visualization, then also it can also be used education materials. Hence, the authors developed an Shanghanlun ontology by way of showing an example, so that we suggested a methodology for ontology development and also a model to structure the traditional medical knowledge. And this result can be used for student to learn Shanghanlun by graphical representation of it's knowledge. We analyzed the text of Shanghanlun to construct relational database including it's original text, symptoms and herb formulars. And then we classified the terms following some criterion, confirmed the structure of the ontology to describe semantic relations between the terms, especially we developed the ontology considering visual representation. The ontology developed in this study provides database showing fomulas, herbs, symptoms, the name of diseases and the text written in Shanghanlun. It's easy to retrieve contents by their semantic relations so that it is convenient to search knowledge of Shanghanlun and to learn it. It can display the related concepts by searching terms and provides expanded information with a simple click. It has some limitations such as standardization problems, short coverage of pattern(證), and error in chinese characters input. But we believe this research can be used for basic foundation to make traditional medicine more structural and systematic, to develop application softwares, and also to applied it in Shanghanlun educations.

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1275-1288
• /
• 2015

A microscale weather analysis module (about 1km or less) is a microscale numerical weather prediction model designed for operational forecasting and atmospheric research needs such as radiant energy, thermal energy, and humidity. The accuracy of the module is directly related to the usefulness and quality of real-time microscale weather information service in the metropolitan area. This paper suggests an object based verification method useful for spatio-temporal evaluation of the accuracy of the microscale weather analysis module. The method is a graphical method comprised of three steps that constructs a lattice field of evaluation statistics, merges and identifies objects, and evaluates the accuracy of the module. We develop lattice fields using various evaluation spatio-temporal statistics as well as an efficient object identification algorithm that conducts convolution, masking, and merging operations to the lattice fields. A real data application demonstrates the utility of the verification method.

• Korean Journal of Pharmacognosy
• /
• v.6 no.1
• /
• pp.15-21
• /
• 1975

The free fatty acids were prepared from the ethereal fraction of Panax ginseng. The prepared acids were methylated with diazomethzne. The methyl esters of saturated and unsaturated fatty acids were separated by the means of mercuric acetate method and column chromatography. The separated methyl esters were gaschromatographed and analyzed. The obtained conclusions were as follows. 1. The root of six-year old Korean Panax ginseng contains 0.28% of free fatty acids. 2. It was found that 24 kinds of free fatty acids existed in Panax ginseng. Among them, 22 kinds of free fatty acids were indentified by the gas chromatogram and the graphical method but the rest, 2 kinds of them were not identified by the only gas chromatographical data. The amount of each free fatty acid which was not identified was predominant and they were supposed to be unusual free fatty acids which would not commonly exist in nature. These results were shown in Table III. 3. $L_{EE}$ and $L_{EE}$ reported that n18:3 existed in Panax ginseng. However, in this experiment, n18:3 did not exist in Panax ginseng, and instead, peak XVI appeared between n18:2 and n18:3 as shown in Fig. 9.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.111-125
• /
• 2022

Recently, the MZ generation has been leading overall fashion trends, and fashion companies focus on design, marketing, and new products targeting the MZ generation. However, it is expected that a fit problem may occur if the M and Z generations are combined when producing clothing. Therefore, this study aims to analyze the differences between the two groups by comparing the body size according to the classification of the M and Z generations. In addition, this study analyzes whether the body shape of the MZ generation is different from the past generations and analyzes major changes in body size for clothing manufacturing through graphical visualization. As for the research method, a t-test was conducted to verify the significant difference between the measurements for each age group. Generation M was defined as those who are 27-39 years old, and Generation Z was defined as those who are 20-26 years old. In order to examine the changes in body measurements according to the measurement year, the 7th Size Korea and 8th Size Korea data were analyzed. In order to examine the visual changes according to the measurement year and age group, major measurements of clothing construction were analyzed. As a result, it was found that Generation M had a significantly higher height item than Generation Z. Also, in terms of circumference, width, and thickness, Generation M was larger than Generation Z. But the size of the bra cup was larger in Generation Z than Generation M. As a result of analyzing the body size changes, in the height item, the 8th Size Korea measurements were found to be significantly higher in shoulder height and navel level waist height. In the length and circumference items, the 8th Size Korea measurements were larger than the 7th. In the width, thickness, and other items, the 8th measurements were larger than the 7th.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.681-687
• /
• 2023

The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.375-394
• /
• 2024

The extensive utilization of concrete has given rise to environmental concerns, specifically concerning the depletion of river sand. To address this issue, waste deposits can provide manufactured-sand (MS) as a substitute for river sand. The objective of this study is to explore the application of machine learning techniques to facilitate the production of manufactured-sand concrete (MSC) containing stone nano-powder through estimating the splitting tensile strength (STS) containing compressive strength of cement (CSC), tensile strength of cement (TSC), curing age (CA), maximum size of the crushed stone (Dmax), stone nano-powder content (SNC), fineness modulus of sand (FMS), water to cement ratio (W/C), sand ratio (SR), and slump (S). To achieve this goal, a total of 310 data points, encompassing nine influential factors affecting the mechanical properties of MSC, are collected through laboratory tests. Subsequently, the gathered dataset is divided into two subsets, one for training and the other for testing; comprising 90% (280 samples) and 10% (30 samples) of the total data, respectively. By employing the generated dataset, novel models were developed for evaluating the STS of MSC in relation to the nine input features. The analysis results revealed significant correlations between the CSC and the curing age CA with STS. Moreover, when delving into sensitivity analysis using an empirical model, it becomes apparent that parameters such as the FMS and the W/C exert minimal influence on the STS. We employed various loss functions to gauge the effectiveness and precision of our methodologies. Impressively, the outcomes of our devised models exhibited commendable accuracy and reliability, with all models displaying an R-squared value surpassing 0.75 and loss function values approaching insignificance. To further refine the estimation of STS for engineering endeavors, we also developed a user-friendly graphical interface for our machine learning models. These proposed models present a practical alternative to laborious, expensive, and complex laboratory techniques, thereby simplifying the production of mortar specimens.

• Journal of The Korean Association For Science Education
• /
• v.27 no.1
• /
• pp.59-69
• /
• 2007

The aim of this study was to investigate teachers' perceptions on MBL (microcomputer-based laboratory) experiment training program for teachers, the expecting effects of MBL experiment and application of MBL experiment after conducting MBL experiment training for science classes in schools. This study showed that most of the teachers who participated in the training program thought that the MBL experiment training program was very useful and instructive. Many teachers considered that MBL experiments using a computer could decrease time spent in the experiment by accurate and fast data collection and analysis. They also thought that the reduced time could be used more effectively in the analysis of experimental data and discussion activities leading to correct concept formation as well as in the development of graphical analysis and science process skills. However, they thought that MBL experiments were ineffective in learning how to operate experiment apparatus. This study also revealed that most teachers intended to apply MBL experiments in real classrooms context right after the training course and they pointed out many obstacles in introducing MBL experiments into their classrooms such as a budget to purchase equipment, poor laboratory conditions, and few MBL experiment training opportunities. In order to apply MBL experiment into the real classrooms, further changes were suggested as follows; development of technologies to reduce unit cost of equipment for MBL experiments, production and supply of many kinds of sensors, development of MBL experiment materials, and expansion of the training program for teachers.