• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1503-1513
• /
• 1998

This paper is related to a performance analysis of B-NT system, which is essential compositional equipment of B-ISDN access network. A simulator enabling performance analysis according to the change of network configuration topology and the change of user traffic is developed in this study. The developed B-NT, system simulator consists of graphic user interface module, simulation program automatic generator module, and B-NT system model library module. As examples of the results of performance analysis using the simulator, end-to-end user cell transmission delay time, queueing delay time in each system, and cell loss rate in the head node switch are presented. The simulator developed in this paper can be utilized in determining the network topology of B-NT system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.409-416
• /
• 1996

This paper describes the simulation environment that verifies whether a new microporcessor described with HDL is compatible with an existing microprocessor. The compatibility verification is done by showing that the new microprocessor executes the OS(Operating System) program used in the existing microprocessor without any modification of its binary code. The proposed verification environment consists of a virtual system and a graphic user interface (GUI) module. Each module is independently designed based on serve-client model and three exists a communication part for information interchange between the two modules. This paper describes the method of constructing the verification environment and presents the compatibility verification environment of the x86 microprocessor as the simulation result.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.3 no.1
• /
• pp.59-62
• /
• 2003

The death from suffocation due to the gas from various disaster is frequent very and it occurs. Specially only from the company which treats the gas and only the enterprise which maintains the gas the many greeting accident occurs. Also accidents could occur when working around the toxic gas without one's noticing Therefore a development of the portable gas ditectoror is very essential. Specially with development of design and the new product of the electric chemical sensor might help reducing the many accidents. From the side which protects a worker's life, it isn't just simple equipment but also it must be connected directly to life saving is very important. Therefore, the key technical contents of development must be focused on sensor which is simple and easy to carry and able to detect varieties of toxic gas. So, this study is about the product design which is simple and easy to carry and to use.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.157-167
• /
• 1996

A graphics system for optimum design(GOD) was developed for the various optimization programs. It is composed of a preprocessor and a postprocessor using the methods of pull-down and pop-up menus. The preprocessor of GOD system helps the designer to make a input file or a subprogram according to a selected optimization program. The postprocessor of the system display the numerical results generated during the iterative numerical analysis processes graphically in the graphic mode. Numerical examples as a mathematical linear problem and a 3-bar truss structure are presented to explain the use of GOD system. The system was programmed in one of the computer programming languages, Borland C.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.373-380
• /
• 1999

This paper summerizes the former 5 papers that studied computer programming for the estimation of the Weibull, Extreme value, Hazard, Normal and Log-normal parameters which have a close relation with the reliability of the various kinds of industrial products. Probability paper is very commonly used in estimating the parameters, however, it is very hard to neglect the errors in plotting the data, and especially in drawing the regression line. The main purpose of this paper is to reduce these errors and to help the engineers to use the parameters in improving the reliability of their prod- ucts. The following parts are included in the computer programming with the em- phases on significant digits and rounding of numerical values : $\bullet$ data input part for various cases $\bullet$ parameter estimation part $\bullet$ printing part for input data $\bullet$ printing part for the results $\bullet$ printing part for the graphic(probability paper). And the running results(monitor displays) of the program for a fictitious example of Weibull distribution is given for the interested ones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.378-381
• /
• 2002

In this paper, we proposed an electromyography(EMG) based control method of a virtual robot arm as an adaptive human supporting system or remote control system, which consists of an shoulder control part, elbow control part, and wrist control part. The system uses four surface electrodes to acquire the EMG signal from operator. It is shown from the experiments that the EMG patterns during arm motions can be classified sufficiently by using SOM and LVQ. The interface system based on PC environment is constructed to 3-D graphic user interface(GUI) program. Experimental results show that proposed method obtains approximately 94 percent of success in classification.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.861-867
• /
• 2006

This paper presents the robust mobile robot localization method exploiting redundant motion information acquired from three optical mice that are installed at the bottom of a mobile robot in a regular triangular form. First, we briefly introduce a low-cost optical motion sensor, HDNS-2000, and a commercial device driver development tools, WinDriver, to be used in this research. Second, we explain the basic principle of the mobile robot localization using the motion information from three optical mice, and propose the least squares based localization algorithm which is robust to the noisy measurement and partial malfunctioning of optical mice. Third, we describe the development of the experimental optical odometer using three PC optical mice and the user-friendly graphic monitoring program. Fourth, simulations and experiments are performed to demonstrate the validity of the proposed localization method and the operation of the developed optical odometer. Finally, along with the conclusion, we suggest some future work including the installation parameter calibration, the optical mouse remodelling, and the high-performance motion sensor adoption.

• Journal of Industrial Technology
• /
• v.11
• /
• pp.115-124
• /
• 1991

In this study, we design a position controller for two axis servo system. The position controller performs numerical control(NC)to DC or AC servo motor or step motor, and also has a digital input/output sequence capability. The control program composed of position and sequence command, which is called channel, is programmed easily and user-interactively. And it is interpreted and the straight line and arc position command is interpolated. We develop the Z80 microprocessor based system and the software with assembly and C language, and also PC based graphic simulator for the debugging and educational purposes.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.41-49
• /
• 2013

A tool to assist in designing an eco-village was developed using GIS(Geographical Information System) and RS(Remote Sensing) data and images. The difficulties of using GIS by untrained designers are resolved by simplifying the usage and making it a user friendly scenario-based tool, so that the designers with limited knowledge in GIS can use as a design tool. For this task, Da-Mu-Po, a village in Pohang, Gyeongbuk was picked as a site to test the design tool; through planning and designing as an eco friendly village, we tested the flexibility and usability of our newly developed design tool. From this experiment we also introduced test version of stand-alone GIS design tool by constructing program scenario and GUI(Graphic User Interface).

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1394-1400
• /
• 2014

The current flowing through the overhead transmission lines causes induced voltage on the communication lines, which can be prevented by calculating the induced voltage at the planning stage for overhead transmission line installment through an agreement between the communication and electric power companies. The procedures to calculate the induced voltages, however, are complicated due to the variety of parameters and tower types of the overhead transmission lines. The difficulty necessitates the development of a simulator to measure the induced voltage on the communication lines. This paper presents two simulators developed for this purpose; one using the Data Base (DB) index method and the other using the Graphic User Interface (GUI) method. The simulators described in this paper have been implemented by the EMTP (Electromagnetic Transient Program).