• 제목/요약/키워드: Granular flow

검색결과 113건 처리시간 0.039초

실내모형실험을 통한 토석류 거동특성 연구 (The Characteristics of Debris Flow Using Laboratory Experiment)

  • 임현택;이승준;안현욱;지한미;노영신;김용성
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.262-262
    • /
    • 2022
  • 토석류는 산지 사면에서 발생하여 지형변화에 큰 영향을 미치는 대표적인 자연재해 중 하나로 국내에서 발생하는 토석류는 홍수, 태풍 등 타 재해에 비하여 상대적으로 매우 짧은 시간에 발생하며, 사후대응이 어려우므로 사전대비가 필수적이다. 토석류로 인한 피해를 효과적으로 대비하기 위해서는 국내의 지질, 지형 그리고 강우에 따라 발생하는 토석류에 대한 보다 체계적인 정밀현장조사를 통한 자료 구축과 이를 분석한 토석류의 발생원인, 이동경로와 침식 및 퇴적에 관한 연구가 필요하다. 최근의 토석류 연구에서는 침식-퇴적 및 연행작용에 의한 효과를 반영한 수치모의 연구들이 있으나, 모형의 검증을 위한 침식-퇴적 거동에 대한 자료는 현재까지 매우 부족한 실정이다. 토석류 발생에 따른 침식-퇴적 거동특성은 그 자체로도 공학적으로 중요한 요소이며, 수치해석 모의에 필요한 매개변수 추정에도 필요한 항목이다. 토석류 모의의 검증자료로 활용될 수 있는 토석류에 대한 실험적 연구는 토석류의 확산 형태 및 확산 길이에 대한 내용이 대부분으로 흐름수로에서의 침식 및 퇴적에 대한 연구는 찾아보기 어려운 상태이다. 본 연구에서는 토석류 발생에 따른 흐름부에서의 침식 및 퇴적에 대한 거동 특성을 분석하기 위하여 함수비, 흐름수로 경사, 상부 붕괴토조의 토사깊이, 흐름수로 침식가능 깊이 등 다양한 조건으로 실내모형실험을 수행하였다. 상부 토조의 토사 함수비가 30~80% 실험에서는 퇴적 현상이 탁월하였고, 100% 이상인 실험에서는 침식 현상이 확연하게 나타나 토사의 함수비가 높아지면 집중호우 등 선행강우로 인한 산지 지역에서 발생되는 토석류 현상과 유사하고, 함수비가 낮으면 토석류(Debris flow)가 아닌 입상유동(Granular flow)으로 보는 것이 적절한 것으로 판단된다. 상부 토조의 함수비를 100% 이상으로 변화하여 침식이 발생한 실험에서 상부 토조의 액화 된 토사는 빠른 속도로 흐름이 진행되면서 함수비와 붕괴 체적이 증가할수록 흐름수로 상류부에 침식이 크게 나타나고, 상류부의 토사를 중류부를 거쳐 하류부까지 연행(Entrainment)하는 것으로 판단된다.

  • PDF

A Case of Canine Mammary Comedocarcinoma with Regulatory T Cell Infiltration

  • Siwon Jeong;Jiwoong Yoon;Woo-Jin Song;Jongtae Cheong;Young-min Yun;Gee Euhn Choi;Myung-Chul Kim
    • 한국임상수의학회지
    • /
    • 제41권4호
    • /
    • pp.215-222
    • /
    • 2024
  • An adult female dog was presented for evaluation of rapid growth of mammary gland masses. Complete blood count, serum biochemistry, and diagnostic imaging results were unremarkable. Fine needle aspirates of the mammary masses indicated mammary carcinoma characterized by large globoid cells with finely granular eosinophilic globules or Melamed-Wolinska-like bodies. A regional mastectomy was performed on the masses. Subsequent histopathologic examination of the surgically resected masses resulted in a diagnosis of mammary comedocarcinoma with nodal metastasis and distinct perivascular immune infiltrates, which were subject to immunohistochemical and flow cytometric immunophenotyping. Immunohistochemical examination confirmed the infiltration of CD3+ T and PAX5+ B lymphocytes. Flow cytometric analysis demonstrated tumor-infiltrating CD4+CD25+FOXP3+ regulatory T, CD8+ T, CD11b+ myeloid, and CD21+ B cells. Of note, paired flow cytometric analysis of peripheral blood and tumor tissues showed a preferential tumor infiltration of regulatory T and B cells. Approximately two months after the mastectomy, the tumor reoccurred at the surgery site. The dog died due to deteriorating conditions. We report a rare case of canine mammary comedocarcinoma, providing clinical, clinicopathologic, histologic, and immunophenotypic characteristics. Our case is valuable in providing a rationale for basic research that maps the immune landscape of mammary comedocarcinoma to identify key immune subsets for cancer progression.

Temperature and Timing of the Mylonitization of the Leucocratic Granite in the Northeastern Flank of the Taebaeksan Basin

  • Kim, Hyeong-Soo
    • 한국지구과학회지
    • /
    • 제33권5호
    • /
    • pp.434-449
    • /
    • 2012
  • The Mesozoic leucocratic granite in the northeastern margin of the Taebaeksan Basin was transformed to protomylonite and mylonite. Mylonitic foliations generally strike to NWWNW and dip to NE with the development of a sinistral strike-slip (top-to-the-northwest) shear sense. Grain-size reduction of feldspar in the mylonitized leucocratic granite occurred due to fracturing, myrmekite formation and neocrystallization of albitic plagioclase along the shear fractures of K-feldspar porphyroclasts. As the deformation proceeded, compositional layering consisting of feldspar-, quartz- and/or muscovite-rich layers developed in the mylonite. In the feldspar-rich layer, fine-grained albitic plagioclase and interstitial K-feldspar were deformed dominantly by granular flow. On the other hand, quartz-rich layers containing core-mantle and quartz ribbons structures were deformed by dislocation creep. Based on calculations from conventional two-feldspar and ternary feldspar geothermometers, mylonitization temperatures of the leucocratic granite range from 360 to $450^{\circ}C$. It thus indicates that the mylonitization has occurred under greenschist-facies conditions. Based on the geochemical features and previous chronological data, the leucocratic granite was emplaced during the Middle Jurassic at volcanic arc setting associated with crustal thickening. And then the mylonitization of the granite occurred during the late Middle to Late Jurassic (150-165 Ma). Therefore, the mylonitization of the Jurassic granitoids in the Taebaeksan Basin was closely related to the development of the Honam shear zone.

합성섬유 충진 여과수로를 이용한 건설사업장의 흙탕물 처리 및 배수구 보호에 관한 실험적 연구 (Experimental Study on Synthetic Fiber Filled Channel for Treating Turbid Water at the Construction Sites and Protecting Drain System)

  • 원경과;청징;박기수;김영철
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.537-545
    • /
    • 2016
  • In order to cope with the new and strict government regulations for turbid water discharge from construction sites, this study tested whether synthetic fiber filters can replace conventional best management practices. The filter efficiency was about 10 to 60% with a varying filter depth of 5 to 15cm, presuming extreme storm flow conditions to be in the range of 800 to 1500m/day of filtration rates. Fiber filter acts exactly like a granular filter, i.e. the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. Based on the operational data, we suggested the Log-Log design relationship, which can be used to determine the filter depth and area. Compared to the widely used gravel filter which treats the turbid water at the construction site, about 20% higher efficiency was obtained under similar operating conditions. Cleaning the filter through a simple hand-washing method at the time of break-through, achieved about 90% soil recovery.

물리·화학적 및 생물학적 처리가 결합된 장치형 하천정화 시스템에 관한 연구 (A Study on the Equipment Type of Stream Purification System that Applies Combined Physicochemical and Biological Treatment)

  • 엄한기;김성철;김성수;김삼주
    • 한국물환경학회지
    • /
    • 제33권3호
    • /
    • pp.273-281
    • /
    • 2017
  • The objective of this study is to evaluate the performance of stream purification equipment system combined MBP (Micro Bubble Process) and AGBP (Aerobic Granular Biofilm Process). Based on results, the optimal HRT (Hydraulic Retention Time) of MBP and AGBP set as 0.72 and 2.4 h, respectively. In the results of continuous operation on combined MBP and AGBP, it is possible to achieve a BOD, TSS and T-P removal efficiency of 85, 90 and 94%, respectively. It also confirmed that the water quality of the stream can be purified with increasing circulation flow through water simulation evaluation applied the QUAL-NIER model. Consequently this purification system can resolve the stream purification and dry stream problem.

도로노면 유출수 처리를 위한 여과에서의 여재별 손실수두 특성 (A study on the headloss of filter media for treatment of Road Runoff)

  • 최원석;송창수;김석구
    • 상하수도학회지
    • /
    • 제22권6호
    • /
    • pp.697-704
    • /
    • 2008
  • Stormwater runoff from urban road area as non-point source has a tendency of including lots of pollutants at initial rain period. Recently, there are several cases of having installed treatment facilities for reducing pollution discharge from the impervious cover in urban area to prevent watershed environment from getting worse. The filtration type among non-point source treatment systems has been known as one of the most efficient system for treatment of non-point source pollutants. Therefore, various kinds of filter media such as expanded polypropylene(EPP), granular activated carbon, zeolite, perlite, illite, sand, gravel has been developed. This study was conducted to verify performance and hydraulic characteristics of filter media as measures for non-point source. The experiment was carried out to evaluate applicability and variation of 4 kind of most popular filter media(EPP, GAC, Zeolite, Perlite) in headloss with elapsed time and influent flow rate and to obtain data base that could be used to establish management plan for road runoff treatment. In experiment by tap water, it showed that EPP and perlite those are floatable materials showed stable operating performance and lower headloss than the others.

원추형 유동층 연소기 내의 열전달에 미치는 복원계수의 영향에 대한 수치해석 연구 (A Numerical Study on the Effect of Coefficient of Restitution to Heat Transfer in a Conical Fluidized Bed Combustor)

  • 강승모;박외철;;고동국;임익태
    • 반도체디스플레이기술학회지
    • /
    • 제14권4호
    • /
    • pp.38-44
    • /
    • 2015
  • In this paper, numerical simulations on conical fluidized bed combustors were carried out to estimate the effect of coefficients of restitution between particle and particle and particle to wall on hydrodynamics and heat transfer. The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics and heat transfer in a conical fluidized bed combustor. The solid phase properties were calculated by applying the kinetic theory of granular flow. Simulations results show that increasing the restitution coefficient between the particle and particle results in increasing the bed pressure drop. On other hand, the increasing of particle to wall coefficient of restitution results in decreasing the bed pressure drop. It is found that the coefficient of restitution has little effect on heat transfer.

SiAlON 원료분말제조를 위한 분무건조 과립분말의 형상과 크기에 미치는 공정변수효과 (Effect of Process Parameters on the Morphology and Size of Spray-Dried Granule Powder for Fabrication of SiAlON Raw Material)

  • 최재형;이소율;한윤수;이성민;남산;김성원
    • 한국재료학회지
    • /
    • 제27권12호
    • /
    • pp.716-721
    • /
    • 2017
  • SiAlON-based ceramics are some of the most typical ceramic materials used as cutting tools for HRSA(Heat Resistant Super-Alloys). SiAlON can be fabricated using ceramic processing, such as mixing, granulation, compaction, and sintering. Spray drying is a widely-used method for producing a granular powder of controlled morphology and size with flowability. In this study, we report a systematic investigation aimed at optimizing spherical granule morphology by controlling spray-drying parameters such as gas flow and feed rate. Before spray drying, the viscosities of the raw material slurries were also optimized with the amount of dispersant added.

한국서남해안지역(韓國西南海岸地域)에 분포(分布)하는 함유질물층(含油質物層)에 대(對)한 지질학적(地質學的) 및 지구화학적연구(地球化學的硏究) (Geologic and Geochemical study on the rock sequences containing oily materials in Southwestern Coast Area of Korea)

  • 이대성;이하영
    • 자원환경지질
    • /
    • 제9권1호
    • /
    • pp.45-73
    • /
    • 1976
  • This study has been made for the enlargement of a previous work of 1964 which was carried out by an author of this work emphasizing the stratigraphy, micropaleontology, depositional environment, and structural tectonics of the studied area. The stratigraphic sequences of the area are groupped into four units: (1) basement of Pre-Cretaceous, (2) lower sediments of Late Cretaceous, (3) upper sediments of Late Cretaceous and (4) igneous rocks of Late Cretaceous and Tertiary (?). The oldest rocks consisting of schists and gneisses of Pre-Cambrian and schistose granite' of Jurassic age are exposed at the base of this area on which the thick Cretaceous sediments were deposited. These old rocks are unconformably overlain by the lower sedimens of Late Cretaceous composed of three members, an alternation of black shale and tuffaceous sediments, fine tuff and rhyollite flow in ascending order. The oily material was found from the black shales of the alternation m"ember as semi-solid greaselike material, oily order and microscopic granular spherical material and oily stain. The lower sediments are also overlain, in low-angleunconfromity, by the 'upper sediments having three members, an alternation of volcanic conglomerate and andesitic tuff, rhyollitic tuff and andesite flow in the same order. The igneous suit of diabase, diorites, biotite granite, porphyritic granite and porphyries of the latest Cretaceous and small exposure of pitchstone of Tertiary (?) intruded into the pre-existed rocks above mentioned. Considerable amount of ostra- coda microfossils have been chemically extracted from the black shales of the lower sediments and the identification of the fossils suggests that the depositional environment of the sediments were under fresh or brackish water condition. The distribution of the geology and its tectonic data also suggest a combination of dome and basin structures in the area of San-i peninsula and Jin-do as shown in fig. 8. Between these two units an anticlinal structure was constructed. As a result of this study, a seismic survey in a district between U-su-yong and north coast of Jin-do is recommended to determine the underground features.

  • PDF

입제비료 살포기의 출구조절에 의한 균일도의 분석과 제어 (Analysis and Control of Uniformity by the Feed Gate Adaptation of a Granular Spreader)

  • 권기영
    • Journal of Biosystems Engineering
    • /
    • 제34권2호
    • /
    • pp.95-105
    • /
    • 2009
  • A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.