• 제목/요약/키워드: Grain Design

검색결과 473건 처리시간 0.027초

음향 양자 이론의 사운드 디자인적 응용 (Theory of Acoustic Quanta and its Application on Sound Design)

  • 구자환
    • 한국산학기술학회논문지
    • /
    • 제19권9호
    • /
    • pp.420-426
    • /
    • 2018
  • 데니스 게이버(Dennis Gabor)의 음향 양자(Acoustic Quanta) 이론은 음향 합성법의 하나인 그래뉼러 합성법(Granular Synthesis)의 이론적 토대가 되어 많은 컴퓨터 음악 작곡가들과 사운드 디자이너들에게 영감을 주었다. 음향 양자는 1에서 100 ms의 지속시간을 가진, 시간적으로 더 이상 짧게 분해될 수 없는 소리를 뜻한다. 그래뉼러 합성법은 원음을 매우 짧은 시간 간격으로 분할하여 소리 입자들(Sound Grain)로 만든 다음, 이 소리 입자들을 조합하여 새로운 음악 또는 음색을 구현하는 방법이다. 음향 양자 개념은 그래뉼러 합성법의 소재가 되는 소리 입자의 이론적 근거가 되었다. 기존 음향 합성법과는 전혀 다른 음색의 사운드를 만들어 낼 수 있는 그래뉼러 합성법은 사운드 디자인 분야에서 다양한 용도로 사용 가능하다. 본 논문에서는 게이버의 음향 양자 개념을 소개하고 이를 그래뉼러 합성법에 적용하여 활용 가능한 사운드 디자인 방법, 특히 동기식(Synchronous) 그래뉼러 방식에 의한 신디사이저(Synthesizer) 제작 가능성과 그 응용에 대하여 논하였다. 연구결과 가청주파수를 감안한 음향 양자의 지속시간은 0.239에서 33.367 ms 사이가 되어야하기 때문에 음향 양자의 본래 개념과는 차이가 있었다.

Analytical Method를 이용한 고체 추진제 그레인의 Burn-back 연구 (Study on Solid Propellant Grain Burn-back Analysis Using Analytical Method)

  • 손지현;장진성;오석환;노태성
    • 한국추진공학회지
    • /
    • 제18권3호
    • /
    • pp.40-47
    • /
    • 2014
  • 우주발사체 최적 설계에 사용될 내탄도 해석 코드를 위한 그레인 Burn-back 연구를 수행하였다. 그레인 Burn-back은 내탄도 해석에 필수적인 그레인의 연소면적의 계산에 사용된다. 최적 설계에 사용될 내탄도 해석 코드는 설계 변수의 변경 및 반복계산을 통해 요구 성능을 만족할 때 까지 반복 계산을 수행한다. 따라서 내탄도 해석에 적용될 Burn-back 해석기법은 설계 변수의 변경이 용이하며 계산시간이 짧아야 한다. 이에 본 연구에서는 Analytical Method를 이용하여 Burn-back 해석코드를 개발하였으며, 그레인 형상에 대해 기하학적 변수를 선정 및 형상 변화에 대해 정리하였다. 개발된 코드는 Numerical Method로부터 산출된 값과 비교하여 검증을 수행하였다.

곡물(糓物)의 물리적(物理的) 특성(特性)에 관(關)한 연구(硏究) (Physical Properties of Grain)

  • 김만수;고학균
    • Journal of Biosystems Engineering
    • /
    • 제6권1호
    • /
    • pp.73-82
    • /
    • 1981
  • The physical properties of grain are very important for the design of handling, sorting, processing, and storage system. On the physical properties of grain, volume, bulk density, true density, specific gravity, and porosity arc the major factors affecting the thermal properties of grain. This study was conducted to determine experimentally the above physical properties of rough rice (3 Japonica-type, 3 Indica-type) and barley (covered, naked) as a function of moisture content ranged from about 10% to 25% (w.b). The results of this study are summarized as follows; 1. The volume of grain kernel increased with moisture content for both rice and barley. The volume of those grain kernel was in the range of $2.2068{\times}10^{-8}{\sim}3.3960{\times}10^{-8}m^3$ at the moisture content of 14%. 2. The bulk density of rice increased linearly with moisture content for Japonica-type rough rice and quadratically for Indica-type rough rice, but the bulk density of barley decreased linearly with moisture content. The bulk density of the grain was in the range of 501.14~689.13kg/$m^3$ at the moisture content of 14%. 3. The true density of whole grain decreased linearly with moisture content, and was in the range of 1019.49~1139.75kg/$m^3$ at the moisture content of 14%. 4. The porosity of rice decreased linearly with moisture content for Japonica-type rough rice and quadratically for Indica-type rough rice, but the porosity of barley increased linearly with moisture content. The porosity of the grain was in the range of 39.51~50.83% at the moisture content of 14%. 5. The regression equations of the physical properties such as volume, bulk density, true density, and porosity of the grain were determined as a function of moisture content.

  • PDF

탈곡기의 선별 성능을 측정하는 방법의 개발에 관한 연구 (Development of Method for Measuring the Grain Separating Performance of Threshers)

  • 이승기;정창주
    • 한국농공학회지
    • /
    • 제17권1호
    • /
    • pp.3655-3665
    • /
    • 1975
  • This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.

  • PDF

고 망간강 2상 혼합조직의 열적 안정성에 관한 연구 (A Study on the Thermal Stability of Duplex High Mn-Steel Structure)

  • 위명용
    • 열처리공학회지
    • /
    • 제5권1호
    • /
    • pp.13-22
    • /
    • 1992
  • The thermal stability of duplex high Mn-steel structure have been investigated using 15%Mn~1.0~2.4%C steels which are composed of ${\gamma}$-and ${\theta}$-phases in the range of temperature from 900 to $1100^{\circ}C$, and time from 50 to 300h. The results are as follows ; 1) The grain growth in single-phase region proceeds by grain boundary migration and the relation between mean radius $\bar{r}$ and annealing time t is described as follows ; $\bar{r}^2-{\bar{r}_0}^2=k_0{\cdot}t$ 2) The grain growth of duplex, (${\gamma}+{\theta}$), strucrure is slower than that single phase because the chemical composition of ${\gamma}$-and ${\theta}$-phases differs esch others. 3) The grain of (${\gamma}+{\theta}$) duplex structure grow slowly in a mode of Ostwald ripening. Because grain boundaries of ${\gamma}$-phase migrate under a restriction of pinning by ${\theta}$-phases. 4) In the duplex structures. the dispersed structures change to the dual-structures, as the volume fraction of the dispersed second-phase increase. Consequently, the growth-law, which is controlled by boundary-diffusion change to that of the volume diffusion-mechanism.

  • PDF

일체형 곡물 건조/저장 시스템 개발을 위한 Straight Type Sweeping Auger의 이송 특성 분석에 관한 연구 (A Study on the Conveying Characteristic Analysis of Straight Type Sweeping Auger for Development of Combined Grain Drying and Storage System)

  • 최갑용
    • 한국산학기술학회논문지
    • /
    • 제10권3호
    • /
    • pp.521-528
    • /
    • 2009
  • 본 연구는 일체형 곡물 건조/저장 시스템에 채용되고 있는 Straight Type Sweeping Auger에 대한 성능과 적합성 검사를 실험을 통하여 검증하였다. 일체형 곡물 건조/저장 시스템의 핵심 기술은 선입선출을 가능토록 하는 Sweeping Auger의 설계기술에 있다. 바람직한 Sweeping Auger의 설계방향을 제시하기 위하여 Straight Type Sweeping Auger가 곡물 속에서 회전할 때 원주면에서 유동하는 곡물의 거동을 알아보기 위한 실험을 실시하고 결과 분석을 통하여 원인규명을 하였다.

Optimal Design of Silo System for Drying and Storage of Grains (I)-Simulation Modeling with SLAMSYSTEM

  • Chung, Jong-Hoon
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.952-965
    • /
    • 1993
  • A simulation modeling is necessary for the optimal design of a rice processing plant, which consists of a facility (a silo system) of rice drying and storage and a rice mill plant. In a rice processing plant, the production scheduling and the decision on capcity of each unit based on a queuing theory is very important and difficult. In this study a process-oriented simulation model was developed for the design of a rice drying and storage system with SLAMSYSTEM. The simulation model is capable of simulating virtually all the processing activities and provides work schedules which minimize total processing time , mean flow time and bottleneck of the plant system and estimate drying time for a batch in a drying silo. Model results were used for determination the size and capacity of each processing unit and for analyzing the performance of the plant . The developed model was actually applied to construct a grain silo system for rice drying and storage.

  • PDF

한국 재래 적미 수집 및 특성 검정 VI. 질소시비량에 따른 수량 및 수량구성요소 (Collection and Evaluation of Korean Red Rices VI. Nitrogen Response on Yield and Its Components)

  • 하운구;서학수
    • 한국작물학회지
    • /
    • 제38권2호
    • /
    • pp.134-138
    • /
    • 1993
  • 한국에서 수집된 장, 단입형 적미 각각 4계통과 삼강벼와 섬진벼를 대조품종으로 하여 질소수준을 0, 7.5, 15.0, 22.5kg/10a 등 4수준으로 하여 수량구성 요소와 수량을 조사한 결과를 요약하면 다음과 같다. 1. 적미의 수수와 이삭당 영화수는 질소수준이 0-22.5kg/10a으로 증가함에 따라 대조품종과 같은 경향으로 증가하였다. 2. 장입형 적미의 천입종은 질소 시비량이 증가함에 따라 대체로 감소하는 경향이었던 반면 대조품종인 삼강벼는 증가하였다. 단입형 적미와 대조품종인 섬진벼의 천입중은 질소 시비량 증가에 따른 변화가 없었다. 3. 질소 시비량이 22.5kg/10a까지 증가함에 따라 장입형 적미의 수량은 대체로 증가하는 경향이었으나 단입형 적미는 7.5kg/10a까지는 증가하나 그 이상의 질소 수준에서는 비슷한 수량을 보였다.

  • PDF

Lung Function of Grain Millers Exposed to Grain Dust and Diesel Exhaust in Two Food Markets in Ibadan Metropolis, Nigeria

  • Iyogun, Kemi;Lateef, Suraju A.;Ana, Godson R.E.E.
    • Safety and Health at Work
    • /
    • 제10권1호
    • /
    • pp.47-53
    • /
    • 2019
  • Background: Despite growing concern over occupational exposure to particulate matter (PM) such as grain dust and diesel exhaust, information about the exposure level and health implications among workers in small-scale milling enterprises in developing countries like Nigeria has not been adequately documented. The purpose of this study was to assess the level of exposure to grain dust and diesel exhaust and effect on lung function among grain millers in food markets in Ibadan metropolis, Nigeria. Methods: The study adopted descriptive cross-sectional design with a comparative approach. Sixteen grain milling shops each were randomly selected from two major food markets in Ibadan metropolis for indoor $PM_{10}$ and $PM_{2.5}$ monitoring. Seventy-two respondents each were proportionately selected from grain millers and shop owners for forced expiratory volume in one second and peak expiratory flow rate tests. Results: The $PM_{2.5}$ concentrations for both market locations ranged between 1,269.3 and $651.7{\mu}g/m^3$, while $PM_{10}$ concentrations were between 1,048.2 and $818.1{\mu}g/m^3$. The recorded concentrations exceeded the World Health Organization guideline limit of $50{\mu}g/m^3$ and $25{\mu}g/m^3$ for $PM_{2.5}$ and $PM_{10}$, respectively. As compared with control group (2.1 L), significantly lower forced expiratory volume in one second value (1.61 L) was observed among the exposed group (p < 0.05). Likewise, significantly lower peak expiratory flow rate value (186.7 L/min) was recorded among the exposed group than the control group (269.51 L/min) (p < 0.05). Conclusion: Exposure to grain dust and diesel exhaust accentuated respiratory disorders with declines in lung functions amongst grain millers. Improved milling practices and engaging cleaner milling facilities should be adopted to minimize exposure and related hazards.

관개용수 pH가 벼 생육, 수량, 미질에 미치는 영향(I) (Effect of pH in Irrigation Water on the Growth, Yield, and Grain Quality of Rice)

  • 최선화;김호일;안열;허유만
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2003년도 학술발표논문집
    • /
    • pp.551-554
    • /
    • 2003
  • This study was carried out to investigate the effects of the pH of irrigation water on the growth, yield, and grain quality of rice. It acquire fundamental knowledges to set up irrigation water quality standards. The pot experiment was conducted with 5 treatments using irrigation waters with various pH values(control, 4, 6, 8, 10) and replicated four times with randomized block design. The results of this study showed that the uptake of N, P, and K, Ripened grain ratio and yield of rice tended to be reduced at the irrigation water of pH 4 and pH 10. P uptake, Ripened grain ratio and yield of rice at pH 4 water were significantly lower than the control. K uptake at pH 10 water was significantly lower than the control. Plant height, SPAD value and protein content of rice were not affected by the pH of irrigation water.

  • PDF