• 소성∙가공
• /
• 제33권3호
• /
• pp.193-199
• /
• 2024

The friction welding characteristics of stainless steels, mainly used in energy and chemical plant industries due to its excellent corrosion resistance and high strength, was evaluated in this study. Friction welding was introduced and conducted at a rotation speed of 2,000 RPM, friction pressure of 30 MPa, burn-off length of 5 mm and upset pressure of 110 ~ 200 MPa on rod typed specimens. The grain boundary characteristics distributions such a grain size, shape, misorientation angle and kernel average misorientation of the welds were clarified by electron backscattering diffraction method. The application of friction welding on SUS304 alloy resulted in a significant refinement of the grain size in the weld zone (5.11 mm) compared to that of the base material (48.09 mm). The mechanical properties of the welds, on the other hand, appeared to be relatively low or similar to those of the base material, which were mainly caused by dislocation density in the initial material and grain refinement in the welds.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.358-362
• /
• 1999

Magnetic levitation forces and trapped magnetic fields of top-seeded melt growth-processed YBCO superconductors with multiseeding were studied. The number of seeds was varied from one to six. The surface magnetic field of the prepared YBCO samples was dependent on the number of the seeds. The trapped magnetic field of the top surface decreased with increasing the number of the seed. Particularly, it drastically decreased at the YBCO grain boundary, probably due to the weak rink nature of the boundary. The magnetic levitation force also decreased with increasing the number of the seeds, similar to the variation of the surface magnetic field.

• International Journal of Safety
• /
• 제8권1호
• /
• pp.6-9
• /
• 2009

The crack in a J85 engine V.G. actuator arm shaft for a bell crank on the engine compressor was investigated. The crack was observed in twenty two shafts during the inspection of 238 shafts. The failure analysis of shaft cracks was performed by chemical composition analysis using ICP(Inductively Coupled Plasma) and by fracture surface and microstructure analysis using FE-SEM and optical microscope. The crack initiated from the top and bottom and propagated to the center along the grain boundaries. From the chemical composition analysis, the fractography of the fracture surface and the microstructure, it was found that the failure mechanism of the shafts is the inclusion-related intergranular decohesion crack. The inclusion was found out from MnS particle by EDS(Energy Dispersive Spectroscopy). The crack initiated MnS inclusion in the grain boundary and propagated with the increase of applied shear stress during long operation. In order to prevent the fracture, NDI(Nondestructive inspection) is needed periodically as recommended.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.6-10
• /
• 2001

Ultrafine $(CeO_2)_{0.9}(Gd_2O_3)_{0.1}$ solid solution powders synthesized by the glycine-nitrate process, with specific surface areas of $19-23\;\textrm{m}^2$/g were sintered at $1500^{\circ}C$ for various sintering times and then their electrical characteristics were investigated using AC impedance and four-point probe measurements. The electrical resistivity of the sintered $(CeO_2)_{0.9}(Gd_2O_3)_{0.1}$ bodies showed the minimum value at the sintering time of 10 hrs. The minimum total resistivity of the $(CeO_2)_{0.9}(Gd_2O_3)_{0.1}$ bodies sintered at $1500^{\circ}C$ for 10 hrs seems to result from the lowest activation energy for the electrical resistivity by the combination between the activation energies for the resistivities at the grain interior and grain boundary.

• 태양에너지
• /
• 제17권4호
• /
• pp.3-11
• /
• 1997

다결정 실리콘에서 결정입계는 광생성된 반송자들의 재결합 중심으로 작용할 뿐 아니라 전위장벽으로 작용하여 태양전지의 변환효율을 감소시킨다. 결정입계의 영향을 줄이기 위해 열처리, 결정입계에 대한 선택적 식각, 결정입계로 함몰전극을 형성하는 방법, 다양한 전극 구조, 초박막 금속 형성 후 전극형성 등 여러가지 요소들을 조사하였다. 질소 분위기에서 $900^{\circ}C$ 전열처리, $POCl_3$ 확산을 통한 게터링, 후면전계 형성을 위한 Al 처리로 다결정 실리콘의 결함밀도를 감소시켰다. 결정입계에서의 반송자 손실을 감소시키기 위한 기판 처리로 Schimmel 식각액을 사용하였다. 이는 texturing 효과와 함께 결정입계를 선택적으로 $10{\mu}m$ 깊이로 식각하였다. 결점입계를 우선적으로 식각한 후면으로 Al을 확산하여 후면에서의 재결합 손실을 감소시켰다. 전극 핑거(grid finger) 간격이 0.4mm인 세밀한 전극 구조에 결정입계로 $0.4{\mu}m$ 깊이로 함몰전극을 추가로 형성하여 태양전지의 단락 전류 밀도가 개선되었다. 80% 이상의 광투과율을 보인 20nm 두께의 크롬 박막 형성으로 직렬 저항을 감소시켰다. 본 논문은 저가의 고효율, 지상 전력용 태양진지를 위해 결정입계에 대한 연구를 하였다.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.233-240
• /
• 2019

This study analyzes the mechanical properties, including the attrition rate, of $50{\mu}m$ size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grain-boundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of $50{\mu}m$ YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than $BaTiO_3$ powder (Hv ~315).

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.659-667
• /
• 2012

Alloy 617 is a Ni-base superalloy and a candidate material for the intermediate heat exchanger (IHX) of a very high temperature gas reactor (VHTR) which is one of the next generation nuclear reactors under development. The high operating temperature of VHTR enables various applications such as mass production of hydrogen with high energy efficiency. Alloy 617 has good creep resistance and phase stability at high temperatures in an air environment. However, it was reported that the mechanical properties decreased at a high temperature in an impure helium environment. In this study, high-temperature corrosion tests were carried out at $850^{\circ}C-950^{\circ}C$ in a helium environment containing the impurity gases $H_2$, CO, and $CH_4$, in order to examine the corrosion behavior of Alloy 617. Until 250 h, Alloy 617 specimens showed a parabolic oxidation behavior at all temperatures. The activation energy for oxidation in helium environment was 154 kJ/mol. The SEM and EDS results elucidated a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbides. The thickness and depths of degraded layers also showed a parabolic relationship with time. A normal grain growth was observed in the Cr-rich surface oxide layer. When corrosion tests were conducted in a pure helium environment, the oxidation was suppressed drastically. It was elucidated that minor impurity gases in the helium would have detrimental effects on the high-temperature corrosion behavior of Alloy 617 for the VHTR application.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.688-695
• /
• 2016

Recrystallization behavior has been investigated for commercial purity AA1050 (99.5wt%Al) and high purity 3N Al (99.9wt% Al). Samples were cold rolled with 90% of thickness reduction and were annealed isothermally at 290, 315, and 350o C for various times until complete recrystallization was achieved. Hardness measurement and Electron Backscatter Diffraction(EBSD) analyses, combined with Grain Orientation Spread(GOS), were employed to investigate the recrystallization behavior. EBSD analysis combined with GOS were distinctly revealed to be a more useful method to determine the recrystallization fraction and to characterize the recrystallization kinetics. As the annealing temperature increased, recrystallization in AA1050 accelerated more than that process did in Al 3N. Both AA1050 and Al 3N showed the same temperature dependence of the n value of the Johnson-Mehl-Avrami-Kolmogorov equation(JMAK equation), i.e., n values increased as annealing temperature increased. Activation energy of recrystallization in AA1050 is about 176 kJ/mol, which is comparable with the activation energy of grain boundary migration in cold-rolled AA1050. This value is somewhat higher than the activation energy of recrystallization in Al 3N.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.828-836
• /
• 1994

YBCO산화물초전도체의 고온변형 특성을 조사하기 위하여 $890^{\circ}C$ ~ $930^{\circ}C$의 온도범위에서 $1.0 x 10^{-5}s^{-1}\sim 1.0^{-4}s^{-1}$의초기변형속도로 압축시험을 수행하였다. 변형온도가 증가함에 따라 또한 초기변형속도가 감소함에 따라 flow stress는 감소하였다. 변형률속도 민감지수는 0.41-0.46이었다. 이는 초소성 변형이 일어났음을 보여준다. 초소성변형에 대한 활성화 에너지는 약 500 ~ 580KJ/mol이었으며 Ag첨가량이 증가할수록 활성화에너지는 감소하였다. 초소성변형된 시편들의 미세조직 관찰결과 변형중에 결정립 성장이 일어났으며 Ag양이 증가함에 따라 이러한 현상을 뚜렷하였다. 변형후 결정립 형태는 등축상을 유지하였다. 이러한 결과로 볼때, YBCO 초전도체의고온변형기구는 확산을 동반한 결정립계 미끄러짐으로써 그 비율은 전 변형량중 약 65%정도였다.

• 한국분말재료학회지
• /
• 제23권5호
• /
• pp.379-383
• /
• 2016

A thick film of $Li_7La_3Zr_2O_{12}$ (LLZO) solid-state electrolyte is fabricated using the tape casting process and is compared to a bulk specimen in terms of the density, microstructure, and ion conductivity. The final thickness of LLZO film after sintering is $240{\mu}m$ which is stacked up with four sheets of LLZO green films including polymeric binders. The relative density of the LLZO film is 83%, which is almost the same as that of the bulk specimen. The ion conductivity of a LLZO thick film is $2.81{\times}10^{-4}S/cm$, which is also similar to that of the bulk specimen, $2.54{\times}10^{-4}S/cm$. However, the microstructure shows a large difference in the grain size between the thick film and the bulk specimen. Although the grain boundary area is different between the thick film and the bulk specimen, the fact that both the ion conductivities are very similar means that no secondary phase exists at the grain boundary, which is thought to originate from nonstoichiometry or contamination.