• 한국식품과학회지
• /
• 제36권3호
• /
• pp.398-402
• /
• 2004

신소재로 각광 받고 있는 chitosan의 낮은 수용성을 극복하기 위하여 chitosan 유도체인 safrolechitosan(SaCs) 및 eugenolchitosan(EuCs)을 제조하고, Ubbelohde 점도계를 사용하여 이들의 점도평균분자량을 측정한 결과, chitosan 및 chitosan유도체인 EuCs와 SaCs의 경우 각각 $1.2{\times}10^{5}\;Da,\;7.8{\times}10^{5}\;Da$ 및 $7.5{\times}10^{5}\;Da$인 것으로 확인되었다. Chitosan과 chitosan유도체의 구조분석을 위한 IR spectrum에서 SaCs의 경우, safrole의 공유결합에 의한 chitosan내 amine기와의 반응으로 인하여 순수 chitosau보다 amide II 흡수띠가 $1,553cm^{-1}$으로 이동함을 알 수 있었는데, 이것은 chitosan내의 1차 amine기와 safrole의 이중결합이 반응하여 공유결합을 형성함으로써 흡수띠의 이동현상이 나타난 결과이다. 또한, safrole이 반응하면서 safrole내의 vinyl기를 의미하는 특징적인 peak인 C=C 및 $H_{2}C=$의 $1,611cm^{-1}$와 $1,442cm^{-1}$에서의 흡수띠가 사라졌으며, EuCs의 경우에도 반응물질로 사용된 eugenol내의 vinyl기를 나타내는 $1,612cm^{-1}$ 및 $1,434cm^{-1}$에서의 흡수띠가 사라짐을 확인하였다. 또한 $^{1}H-NMR\;spectrum$을 확인한 결과, 합성유도체의 경우 safrole과 eugenol 간량체의 5.7-6.0ppm에서 나타난 이중결합($H_{2}C=CH-$) peak가 사라지고, SaCs는 2.1-2.2ppm에서, 그리고 EuCs는 1.9와 2.2ppm에서 단일결합($-CH_{2}-CH_{2}-$)의 peak가 생성됨을 알 수 있었으며, safrole과 eugenol이 chitosan에 그라프트된 후 safrole과 eugenol의 영향으로 chitosan내의 $H_{3}-H_{6}$의 수소 숫자가 상대적으로 감소하여 3.1-3.9ppm에서 나타나는 peak의 크기가 작아짐도 확인하였다. 이상의 결과들을 종합해 볼때, SaCs 및 EuCs를 합성하기 위한 그라프트 반응이 정상적으로 일어났음을 알 수 있었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 춘계학술발표회 프로그램 및 초록
• /
• pp.22-23
• /
• 1995

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.254-263
• /
• 2021

In this study, chitosan obtained after varying extents of deacetylation (i.e., 10%, 30%, and 47%) was employed to introduce antibacterial properties to chitin. The deacetylation reaction completion, wherein the amino group content of chitin was reduced, was ascertained from the FT-IR and NMR analyses. The 47%-deacetylated chitosan exhibited superior antibacterial properties against Bacillus in a disk diffusion test. To further improve these properties, chitosan derivatives were grafted by acrylic acid and acrylamide. The varying concentrations of carboxyl groups, primary amines, and -CH₂-CH₂- with increasing acrylic acid and acrylamide contents were determined by FT-IR and NMR analyses. The enhanced antibacterial properties of the chitosan derivatives, owing to the increased acrylic acid and acrylamide contents, were revealed by the disk diffusion test. In particular, the derivatives with 1.3% acrylic acid and acrylamide showed the highest antibacterial activity, the bacterial reduction rate against Staphylococcus aureus and Escherichia coli being 99.9%, as observed through the ASTM E2149 standard test.

• Journal of Periodontal and Implant Science
• /
• 제32권3호
• /
• pp.489-500
• /
• 2002

The purpose of this study was to evaluate newly fabricated tricalcium phosphate(TCP)/chitosan microgranuls as bone substitutes. TCP/chitosan microgranules were fabricated by dropping TCP-chitosan suspension into the NaOH/ethanol solution. The size of microgranules could be controllable via airflow rate. PDGF-BB was loaded into the fabricated granules via freeze-drying methods(300 ng/20 mg). To evaluate cell proliferation, cultured osteoblasts cell lines(MC3T3-El) was dropped on the BioOss(R), chitosan microgranules, TCP/chitosan microgranules and cultured for 1, 7 , 14, and 28 days. Scanning electron microscopic observation was done after 7 days of culture and light microscopic examination was done after 28 days of culture. PDGF-BB release from the microgranules was tested. Rabbit calvarial defects(8 mm in diameter) were formed and chitosan, TCP/chitosan, PDGF-TCP/chitosan microgranules, and BioGran(R) were grafted to test the ability of new bone formation. At SEM view, the size of prepared microgranules was 250-1000 um and TCP powders were observed at the surface of TCP/chitosan microgranules. TCP powders gave roughness to the granules and this might help the attachment of osteoblasts. The pores formed between microgranules might be able to allow new bone ingrowth and vascularization. There were no significant differences in cell number among BioOss(R) and two microgranules at 28 day. Light and scanning electron microscopic examination showed that seeded osteoblastic cells were well attached to TCP/chitosan microgranules and proliferated in a multi-layer. PDGF-BB released from TCP/chitosan microgranules was at therapeutic concentration for at least 1 week. In rabbit calvarial defect models, PDGF-TCP/chitosan microgranules grafted sites showed thicker bone trabeculae pattern and faster bone maturation than others. These results suggested that the TCP/chitosan microgranules showed the potential as bone substitutes.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.443-448
• /
• 2006

A novel ${\beta}$-cyclodextrin derivative (CCD-C) was synthesized with chitosan and carboxymethyl-${\beta}$-cyclodextrin. Its structure was characterized by elemental analysis, infrared spectra analysis, and X-ray diffraction analysis. The adsorption properties for guanosine 5'-monophosphate, cytidine 5'-monophosphate and uridine 5'-monophosphate were studied. Experimental results demonstrated that CCD-C had higher adsorption capability for guanosine 5'-monophosphate, and that the adsorption capacity for guanosine 5'-monophosphate was 74.20mg/g. The adsorption capacity was greatly influenced by pH, time and temperature. The introduction of chitosan enhanced the adsorption ability and adsorption selectivity of ${\beta}$-cyclodextrin for guanosine 5'-monophosphate. This novel derivative of chitosan is expected to have wide applications in the separation, concentration and analysis of nucleotides in biological samples.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.211-215
• /
• 2018

Chitosan was modified by gamma radiation-induced grafting with maleic acid and then used for the removal of cobalt ions from aqueous solutions. Chitosan-g-maleic acid was characterized by Fourier Transform infrared spectroscopy (FT-IR). The effect of the dose (1-5 kGy) and monomer concentration (0.3-1.3%, m/v) on the grafting ratio was examined. The adsorption kinetics and isotherms were also investigated. The results showed that the optimal dose for grafting was 2 kGy. When monomer concentration was within the range of 0.3-1.3% (m/v), the grafting ratio increased almost linearly. For the adsorption of cobalt ions by chitosan-g-maleic acid beads, the pseudo second-order kinetic model ($R^2=0.99$) and Temkin isotherm model ($R^2=0.96$) were able to fit the experimental data reasonably well. The equilibrium adsorption capacity of cobalt ions increased from 2.00 mg/g to 2.78 mg/g after chitosan modification.

• 공업화학
• /
• 제3권1호
• /
• pp.172-178
• /
• 1992

$F^{3+}(FeCl_3{\cdot}6H_2O)$을 광증감제로 하여 Chitosan 필름에 아크릴로니트릴 단량체를 수용액상에서 자외선 조사하여 그라프트 공중합시켰다. 그라프트 공중합체의 확인은 IR 스펙트럼과 전자 현미경으로 행하였다. 단량체의 농도, 광증감제의 농도, 중합반응시간, 중합반응온도 등 여러 중합반응의 파라미터를 조사하였다. 단량체의 농도와 광증감제의 농도가 증가할수록 퍼센트 그라프팅은 증가하였으며 중합반응시간과 중합반응온도가 증가하여도 퍼센트 그라프팅은 증가하였다.

• 공업화학
• /
• 제5권3호
• /
• pp.524-536
• /
• 1994

생체적합성이 좋은 천연고분자인 chitosan에 수용성의 비닐계 단량체인 polyethyleneglycol monomethacrylate series를 그라프트중합시켜 그 반응조건과 물성을 검토하였다. 그라프트중합은 ethylene oxide 부가몰수에 따라 PE-90, PE-200, PE-350의 세 가지 단량체에 ceric ammonium nitrate(CAN)를 개시제로 사용하였으며, 중합에서 개시제의 농도, 단량체의 농도, 반응온도, 반응시간이 총전환율, 그라프트율, 그라프트효율에 미치는 영향을 조사하여 최적조건을 규명하였다. 반응은 개시제농도 $4{\sim}5{\times}10^{-3}M$, 단량체농도 0.5~0.6M, 반응시간 2~3시간, 반응온도 $40^{\circ}C$에서 최고의 그라프트율과 총전환율을 나타냈다. 합성한 공중합체의 열적 성질, 용해성 및 점성도를 검토한 결과 고농도의 개시제를 사용하면 그라프트 중합체는 chitosan의 특성을 급격히 감소시켰다. 고유점성도의 경우, chitosan-g-PE-90이 2.81dl/g, chitosan-g-PE-200이 3.01dl/g, chitosan-g-PE-350이 4.93d1/g으로 증가하는 경향이 나타났다. 공중합체를 막으로 성형하여 그라프트율과 polyethyleneglycol monomethacrylates의 ethylene oxide 부가몰수에 따른 공중합체의 기계적 물성과 함수율을 측정하였다. 가교화 공중합체막은 150분 이내에 함수율이 평형에 이르렀다. 공중합체의 물성은 그라프트율과 ethylene oxide 부가몰수의 영향을 받았으며 chitosan의 기계적 물성과 함수율이 공중합체에서 증가되었음을 확인하였으며 그라프트율이 증가함에 따라 vitamin $B_{12}$의 투과량도 증가하였다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.231.3-232
• /
• 2003

The biomedical applications of chitosan have been widely researched. FN mediates its biological effects through binding to the hetero-dimeric transmembrane glycoproteins, integrins, which physically couple the cytoskeleton to the ECM. FN binds to the integrin through a consensus site including the Arg-Gly-Asp (RGD) sequence within tenth type III module (Ruoslahti & Pierschbacher 1987). A short sequence Pro-His-Ser-Arg-Asn (PHSRN) has also been identified as a synergistic motif within ninth type III module for binding to ${\alpha}$5${\beta}$1 integrin (Aota et al. 1994). (omitted)

• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.543-549
• /
• 2004

Chitosan has been widely researched as bone substitution materials and membranes in orthopedic/periodontal applications. Chitosan nanofiber membrane was fabricated by chitosan nanofiber using electrospinning technique. The structure of the membrane is nonwoven, three-dimensional, porous, and nanoscale fiber-based matrix. The aim of this study was to evaluate the biocompatibility of chitosan nanofiber membrane and to evaluate its capacity of bone regeneration in rabbit calvarial defect. Ten mm diameter round cranial defects were made and covered by 2 kinds of membranes (Gore-Tex membrane, chitosan nanofiber membrane) in rabbits. Animals were sacrificed at 4 weeks after surgery. Decalcified specimens were prepared and observed by microscope. Chitosan nanofiber membrane maintained its shape and space at 4 weeks. No inflammatory cells were seen on the surface of the membrane. In calvarial defects, new bone bridges were formed at all defect areas and fused to original old bone. No distortion and resorption was observed in the grafted chitosan nanofiber membrane. However bone bridge formation and new bone formation at the center of the defect could not be seen in Gore-Tex membranes. It is concluded that the novel membrane made of chitosan nanofiber by electrospinning technique may be used as a possible tool for guided bone regeneration.